The Effect of Using Microwave Synthesized ZnNb2O6 Powders on the Dielectric Properties of Sintered Products
Source abstract
Abstract
In this study ZnNb2O6 (ZN) powder, which was synthesized using a microwave heating method, was used to prepare ZN ceramics via conventional and microwave sintering methods. The results show that all samples were single phase with no second phases present. The maximum densities obtained for microwave and conventionally sintered samples were 94.6% and 93.8%, respectively, of the theoretical value at 1250°C. SEM analysis showed that for all sintering temperatures, microwave sintered samples exhibit lower grain size values than those sintered via the conventional method. The variations in relative permittivity (er) for samples sintered at different temperatures via both methods followed those of density values. The highest values for er for conventionally and microwave sintered samples, which were observed at 1250°C, were 22.9 and 23.1, respectively. The variation of quality factor (Q × f) with sintering temperature for samples prepared through the microwave method also followed the density data. Q × f values of samples sintered via the conventional method were higher than those for samples sintered in a microwave oven because higher grain sizes were observed for these ceramics. The highest Q × f values for conventionally and microwave sintered samples were 26,197 GHz and 16,200 GHz, respectively.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microwave Dielectric Ceramics Synthesis · Ferroelectric and Piezoelectric Materials · Microwave-Assisted Synthesis and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (24)
Show source-provided references
1. J. Carr, Microwave and Wireless Communications Technology, 1st ed. (Oxford: Butterworth-Heinemann, 1996), pp. 1–27.10.1016/B978-075069707-1/50045-6 ↗
2. Y.C. Zhang, Z.X. Yue, Z.L. Gui, and L.T. Li, Mater. Lett 57, 4531 (2003).10.1016/S0167-577X(03)00357-4 ↗
3. M.T. Sebastian, Dielectric Materials for Wireless Communication, 1st ed. (Oxford: Elsevier, 2008), pp. 1–10.10.1016/B978-0-08-045330-9.00001-7 ↗
4. H.B. Bafrooei, E.T. Nassaj, C.F. Hu, Q. Huang, and T. Ebadzadeh, Physica B 454, 35 (2014).10.1016/j.physb.2014.07.024 ↗
5. S. d’Astorg and S. Marinel, Mater. Res. Bull. 43, 2569 (2008).10.1016/j.materresbull.2007.10.038 ↗
6. A. Belous, O. Ovchar, B. Jancar, and J. Bezjak, J. Eur. Ceram. Soc. 27, 2933 (2007).10.1016/j.jeurceramsoc.2006.11.017 ↗
7. J. Wang, Z. Yue, Z. Gui, and L. Li, J. Alloys Compd. 392, 263 (2005).10.1016/j.jallcom.2004.07.086 ↗
8. R. Quercioli, J. Bernard, J.M. Haussonne, J.M. Reboul, and D. Houivet, Ceram. Int 40, 1771 (2014).10.1016/j.ceramint.2013.07.077 ↗
9. C. Jovalekic and M. Pavlovic, Appl. Phys. Lett. 72, 1051 (1998).10.1063/1.120961 ↗
10. C. Jovalekic, M. Pavlovic, P. Osmokrovic, and M. Zdujic, IEEE Trans. Dielectr. Electr. Insul. 2, 409 (1995).10.1109/94.395429 ↗
11. P. Osmokrovic, C. Jovalekic, D. Manojlovic, and M.B. Pavlovic, J. Optoelectron. Adv. Mater. 8, 312 (2006).
12. Y. Zhang, Z. Yue, Z. Gui, and L. Li, Ceram. Int. 29, 555 (2003).10.1016/S0272-8842(02)00202-X ↗
13. Y.C. Zhang, Z.X. Yue, X. Qi, B. Li, Z. Gui, and L.T. Li, Mater. Lett. 58, 1392 (2004).10.1016/j.matlet.2003.09.034 ↗
14. Y.C. Liou and Y.L. Sung, Ceram. Int. 34, 371 (2008).10.1016/j.ceramint.2006.10.016 ↗
15. N. Shahgholi, K. Asadian, and T. Ebadzadeh, Ceram. Int. 40, 14335 (2014).10.1016/j.ceramint.2014.06.024 ↗
16. J. Sheen, Meas 37, 123 (2005).10.1016/j.measurement.2004.11.006 ↗
17. M. Vujisic, K. Stankovic, and P. Osmokrovic, Appl. Math. Model 35, 3128 (2011).10.1016/j.apm.2010.12.017 ↗
18. K. Stankovic, M. Vujisic, D. Kovacevic, and P. Osmokrovic, Meas: J. Int. Meas. Conf. 44, 1713 (2011).10.1016/j.measurement.2011.07.007 ↗
19. A.M. Kovacevic, A.V. Kovacevic, K.D. Stankovic, and U.D. Kovacevic, Nucl. Technol. Radiat. Prot. 29, 279 (2014).10.2298/NTRP1404279K ↗
20. R. Freer and F. Azough, J. Eur. Ceram. Soc. 28, 1433 (2008).10.1016/j.jeurceramsoc.2007.12.005 ↗
21. H.B. Bafrooei, E.T. Nassaj, T. Ebadzadeh, and C.F. Hu, Ceram. Int. 40, 14463 (2014).10.1016/j.ceramint.2014.07.019 ↗
22. S.P. Wu, J. Ni, J.H. Luo, and X.H. Ding, Mater. Chem. Phys. 117, 307 (2009).10.1016/j.matchemphys.2009.06.005 ↗
23. H.J. Lee, I.T. Kim, and K.S. Hong, Jpn. J. Appl. Phys. 36, L1318 (1997).10.1143/JJAP.36.L1318 ↗
24. R.C. Pullar, J. Am. Ceram. Soc. 3, 563 (2009).10.1111/j.1551-2916.2008.02919.x ↗