journal article·2016-10

Electrical Properties of Polymer/Carbon Nanotube Blends

R. Salgado-Delgado, A. Olarte-Paredes, Z. Vargas-Galarza, E. García-Hernández, A. M. Salgado-Delgado, E. Rubio-Rosas, J. Campos-Álvarez, V. M. Castaño

Journal of Electronic Materials· Volume 45· Issue 10
Publisher page

Abstract

Electrical and morphological properties of a novel composite, consisting of polypyrrole (PPy)/carbon black (CB)/carbon nanotubes (CNT), within a polyethylene (PE) matrix, are reported. The electrical properties were studied according to the type of filler (i.e. PPy, CB or CNT). The resistivity, analyzed by the Van der Pauw method, shows values in the range of (1E+15 for PE to 1.07E−01 for M15) Ω cm. The filler is distributed as one phase within the blended matrix and/or at the interface between the polymers, thus producing a highly homogeneous material. The morphology and degree of dispersion of the PPy/CB/CNTs in the PE matrix at different concentrations were investigated by scanning electron microscopy.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Conducting polymers and applications · Carbon Nanotubes in Composites · Advanced Sensor and Energy Harvesting Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (34)

Show source-provided references
1. S. Rimdusit, C. Jubsilp, and S. Tiptipakorn, Alloys and Composites of Polybenzoxazines Engineering Materials (Singapore: S. S. and B. M., 2013).10.1007/978-981-4451-76-5 ↗
2. W. Zhang, A.A. Dehghani-Sanij, and R.S. Blackburn, J. Mater. Sci. (2007). doi: 10.1007/s10853-007-1688-5 .10.1007/s10853-007-1688-5 ↗
3. W. Brostow, G. Broza, T. Datashvili, H.E.H. Lobland, and A. Kopyniecka, J. Mater. Res. (2012). doi: 10.1557/jmr.2012.116 .10.1557/jmr.2012.116 ↗
4. M.H. Ai-Saleh and U. Sundararaj, Polymer (2010). doi: 10.1016/j.polymer.2010.03.022 .10.1016/j.polymer.2010.03.022 ↗
5. L.F. Giraldo, B.L. López, and W. Brostow, Polym. Eng. Sci. (2009). doi: 10.1002/pen.21386 .10.1002/pen.21386 ↗
6. Z. Spitalsky, D. Tasis, K. Papagelis, and C. Galiotis, Prog. Polym. Sci. (2010). doi: 10.1016/j.progpolymsci.2009.09.003 .10.1016/j.progpolymsci.2009.09.003 ↗
7. S. Shin and I. Kwon, Electron. Mater. Lett. (2011). doi: 10.1007/s13391-011-0913-1 .10.1007/s13391-011-0913-1 ↗
8. W. Tang, M.H. Santare, and S.G. Advani, Carbon (2003). doi: 10.1016/S0008-6223(03)00387-7 .10.1016/S0008-6223(03)00387-7 ↗
9. J. Huang, Adv. Polym. Tech. (2002). doi: 10.1002/adv.10025 .10.1002/adv.10025 ↗
10. R. Ansari, J. Chem. (2006). doi: 10.1155/2006/860413 .10.1155/2006/860413 ↗
11. A. Patiño-Reyes, R. Olarte-Paredes, A.M. Salgado-Delgado, Z. Salgado-Delgado, E. Vargas-Galarza, E. García-Hernández, and E. Rubio-Rosas, Rev. Iber. Polím. 15, 172–177 (2014).
12. S.M. Lomakin, L. Novokshonova, P.N. Brevnov, and A.N. Shchegolikhin, J. Mater. Sci. (2007). doi: 10.1007/s10853-007-2295-1 .10.1007/s10853-007-2295-1 ↗
13. V. Farshidfar and H.Nazokdast Haddadi-Asl, J. ASTM Int. (2006). doi: 10.1520/JAI100431 .10.1520/JAI100431 ↗
14. M. Wen, X. Sun, L. Su, J. Shen, J. Li, and S. Guo, Polymer (2012). doi: 10.1016/j.polymer.2012.02.003 .10.1016/j.polymer.2012.02.003 ↗
15. S.M. Zhang, L. Lin, H. Deng, X. Gao, E. Bilotti, T. Peijs, Q. Zhang, and Q. Fu, Express Polym. Lett. (2012). doi: 10.3144/expresspolymlett.2012.17 .10.3144/expresspolymlett.2012.17 ↗
16. L. Shen, F.Q. Wang, H. Yang, and Q.R. Meng, Polym. Test. (2011). doi: 10.1016/j.polymertesting.2011.03.007 .10.1016/j.polymertesting.2011.03.007 ↗
17. K. Abron, M. Wahit, and S. Bahraeian, Sci. Res. Essays 6, 5895–5902 (2011).
18. Y.P. Mamunya, V.V. Levchenko, G. Boiteux, E.V. Lebedev, M. Zanoaga, and F. Tanasa, Polym. J. 32, 313–320 (2010).
19. R. Shah, T. Datashvili, T. Cai, J. Wahrmund, B. Menard, K.P. Menard, W. Brostow, and J.M. Pérez, Mater. Res. Innova. (2015). doi: 10.1179/1433075X14Y.0000000220 .10.1179/1433075X14Y.0000000220 ↗
20. Y. Liu, Zhizhongsu, X. Li, W. Guo, Q. Li, and C. Wu, J. Macromol. Sci. B (2009). doi: 10.1080/00222340802561730 .10.1080/00222340802561730 ↗
21. G. Broza and K. Schulte, Polym. Eng. Sci. (2008). doi: 10.1002/pen.21075 .10.1002/pen.21075 ↗
22. V.H. Orozco, A.F. Vargas, W. Brostow, T. Datashvili, B.L. López, K. Mei, and L. Su, J. Nanosci. Nanotechnol. 14, 4918 (2014).10.1166/jnn.2014.8289 ↗
23. J. Aalaie, A. Rahmatpour, and S. Maghami, J. Macromol. Sci. B 46, 877 (2007).10.1080/00222340701389100 ↗
24. L.F. Giraldo, W. Brostow, E. Devaux, B.L. López, and L.D. Pérez, J. Nanosci. Nanotechnol. (2008). doi: 10.1166/jnn.2008.092 .10.1166/jnn.2008.092 ↗
25. S. Dean, A. Farshidfar, V. Haddadi-Asl, and H. Nazokdast, J. ASTM Int. (2006). doi: 10.1520/JAI100431 .10.1520/JAI100431 ↗
26. W. Brostow, M. Keselman, I. Mironi-Harpaz, M. Narkis, and R. Peirce, Polymer (2005). doi: 10.1016/j.polymer.2005.01.088 .10.1016/j.polymer.2005.01.088 ↗
27. A. Nogales, G. Broza, Z. Roslaniec, K. Schulte, I. Sics, B.S. Hsiao, A. Sanz, M.C. García-Gutiérrez, D.R. Rueda, C. Domingo, and T.A. Ezquerra, ACS Macro Lett. (2004). doi: 10.1021/ma049440r .10.1021/ma049440r ↗
28. T. McNally, P. Potschke, P. Halley, M. Murphy, D. Martin, S. Bell, G. Brennan, D. Bein, P. Lemoine, and J.P. Quinn, Polymer 46, 8222–8232 (2005).10.1016/j.polymer.2005.06.094 ↗
29. J. Webster, The Measurement, Instrumentation, and Sensors Handbook (Boca Raton: CRC Press, 1999).
30. O. Vigil, A. Martel, and M. Picquart, Física de Semiconductores, 1st ed. (Mexico: Trillas, 2008), p. 204.
31. M. Grayson, Mater. Res. Bull. (1999). doi: 10.1016/S0025-5408(99)00043-4 .10.1016/S0025-5408(99)00043-4 ↗
32. D. Chung, J. Therm. Anal. Calorim. (2001). doi: 10.1023/A:1011584803863 .10.1023/A:1011584803863 ↗
33. M. Hindermann-Bischoff and F. Ehrburger-Dolle, Carbon (2011). doi: 10.1016/S0008-6223(00)00130-5 .10.1016/S0008-6223(00)00130-5 ↗
34. E. Enríquez, J. de Frutos, J.F. Fernandez, and M.A. De la Rubia, Compos. Sci. Technol. (2014). doi: 10.1016/j.compscitech.2013.12.021 .10.1016/j.compscitech.2013.12.021 ↗