journal article·2024-05Open access

Investigation of the Influence of Au (Gold) Doping Concentration on the Structural, Morphological, Optical, and Electrical Parameters of an Al/Au:CuO/n-Si Heterojunction Device

Halit Cavusoglu, Ali Akbar Hussaini, Huseyin Sakalak, Adem Koçyiğit, Fatih Durmaz, Murat Yıldırım

Journal of Electronic Materials· Volume 53· Issue 5

Abstract

In this investigation, we achieved successful deposition of nanostructured cupric oxide (CuO) thin films onto glass substrates through implementation of successive ionic layer adsorption and reaction (SILAR), all carried out at room temperature. This approach has proven to be highly efficient and yielded favorable results in terms of film quality and uniformity. A comprehensive investigation was conducted to analyze the effect of gold (Au) on the structural, morphological, optical, and electrical properties of nanocrystalline CuO thin films. The structural analysis confirmed that the films were polycrystalline, exhibiting a monoclinic crystal structure with preferential orientations along the (1 over bar 11\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\overline{1}11$$\end{document}) and (111) planes. The estimated crystallite sizes ranged from 20.37 to 30.77 nm, indicating the nanoscale nature of the films. Scanning electron microscopy/energy-dispersive x-ray analysis (SEM/EDX) was executed to reveal the Au dopant on the surface of CuO thin films. Surface analysis revealed the presence of uniformly dispersed CuO nanostructures across the film surfaces. Through optical investigations, it was observed that the bandgap energy of the CuO thin films decreased from 1.52 to 1.45 eV with increasing Au concentration. Furthermore, the average transmittance of the films exhibited a decrease from 4.9% to 1.3% as the Au concentration increased. The electrical properties of the Al/Au:CuO/n-Si heterojunction were studied using current-voltage (I-V) measurements for various light power densities. The Al/Au:CuO/n-Si heterojunction exhibited good photodiode behavior, with 3.44 A/W responsivity and 1.58 x 1010 Jones specific detectivity for the 2% Au-doped CuO interfacial layer.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Copper-based nanomaterials and applications · ZnO doping and properties · Semiconductor materials and interfaces

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (49)

Show source-provided references
1. Z. Bai and Y. Zhang, Self-powered UV–visible photodetectors based on ZnO/Cu2O nanowire/electrolyte heterojunctions. J. Alloys Compd. 675, 325 (2016).10.1016/j.jallcom.2016.03.051 ↗
2. M. Thirumoorthi, S. Shek Dhavud, V. Ganesh, T.H. Al Abdulaal, I.S. Yahia, and D. Deivatamil, High responsivity n-ZnO/p-CuO heterojunction thin film synthesised by low-cost SILAR method for photodiode applications. Opt. Mater. 128, 112410 (2022).10.1016/j.optmat.2022.112410 ↗
3. M. Tlili, C. Nefzi, B. Alhalaili, C. Bouzidi, L. Ajili, N. Jebbari, R. Vidu, and N.T. Kamoun, Synthesis and characterization of MgO thin films obtained by spray technique for optoelectronic applications. Nanomaterials 11, 3076 (2021).10.3390/nano11113076 ↗
4. M. Bouzbib, M. El Marouani, and K. Sinkó, Effect of various additives on aluminum oxide thin films prepared by dip coating, thermal behavior, kinetics and optical properties. J. Eur. Opt. Soc. Rapid Publ. 17, 25 (2021).10.1186/s41476-021-00170-x ↗
5. S.S. Parui, N. Kumar, P. Tiwari, N. Tiwari, and R.N. Chauhan, Zinc oxide and cupric oxide based thin films for solar cell applications. Mater. Today Proc. 41, 233 (2021).10.1016/j.matpr.2020.08.799 ↗
6. H. Çavuşoğlu, Evaluating the influence of polyethylene glycol as a surfactant on CdO films grown by SILAR method. J. Phys. Chem. Solids 124, 67 (2019).10.1016/j.jpcs.2018.08.034 ↗
7. H. Cavusoglu, Exploring the role of pH on the physical and optoelectronic attributes of nanostructured NiO thin films. J. Nanoelectron. Optoelectron. 14, 645 (2019).10.1166/jno.2019.2603 ↗
8. H. Cavusoglu, Band-gap control of nanostructured CuO thin films using PEG as a surfactant. Eur. J. Sci. Technol. 13, 124 (2018).10.31590/ejosat.417941 ↗
9. W. Maeng, S.H. Lee, J.D. Kwon, J. Park, and J.S. Park, Atomic layer deposited p-type copper oxide thin films and the associated thin film transistor properties. Ceram. Int. 42, 5517 (2016).10.1016/j.ceramint.2015.12.109 ↗
10. P.V. Raghavendra, J.S. Bhat, and N.G. Deshpande, Visible light sensitive cupric oxide metal-semiconductor-metal photodetectors. Superlattices Microstruct. 113, 754 (2018).10.1016/j.spmi.2017.12.014 ↗
11. P. Horak, V. Bejsovec, J. Vacik, V. Lavrentiev, M. Vrnata, M. Kormunda, and S. Danis, Thin copper oxide films prepared by ion beam sputtering with subsequent thermal oxidation: Application in chemiresistors. Appl. Surf. Sci. 389, 751 (2016).10.1016/j.apsusc.2016.07.143 ↗
12. J. Zhang, Y. Zou, S. Eickelmann, C. Njel, H. Tobias, S. Ronneberger, V. Strauss, P.H. Seeberger, A. Savateev, and F.F. Loeffler, Laser-driven growth of structurally defined transition metal oxide nanocrystals on carbon nitride photoelectrodes in milliseconds. Nat. Commun. 12, 3224 (2021).10.1038/s41467-021-23367-7 ↗
13. O. Gençyılmaz and T. Taşkopru, Effect of pH on the synthesis of CuO films by SILAR method. J. Alloys Compd. 695, 1205 (2017).10.1016/j.jallcom.2016.10.247 ↗
14. A.T. Carvalho, R.R. Lima, L.M. Silva, E. Fachini, and M.L.P. Silva, Nanostructured copper thin film used for catalysis. Sens. Actuators B Chem. 130, 141 (2008).10.1016/j.snb.2007.07.131 ↗
15. E.D. Jackson, J.M. Mosby, and A.L. Prieto, Evaluation of the electrochemical properties of crystalline copper antimonide thin film anodes for lithium ion batteries produced by single step electrodeposition. Electrochim. Acta 214, 253 (2016).10.1016/j.electacta.2016.07.126 ↗
16. O.V. Diachenko, O.A. Dobrozhan, A.S. Opanasyuk, M.M. Ivashchenko, T.O. Protasova, D.I. Kurbatov, and A. Čerškus, The influence of optical and recombination losses on the efficiency of thin-film solar cells with a copper oxide absorber layer. Superlattices Microstruct. 122, 476 (2018).10.1016/j.spmi.2018.06.063 ↗
17. R.L. Papurello, A.P. Cabello, M.A. Ulla, C.A. Neyertz, and J.M. Zamaro, Microreactor with copper oxide nanostructured films for catalytic gas phase oxidations. Surf. Coat. Technol. 328, 231 (2017).10.1016/j.surfcoat.2017.08.066 ↗
18. C. Baratto, R. Kumar, G. Faglia, K. Vojisavljević, and B. Malič, p-Type copper aluminum oxide thin films for gas-sensing applications. Sens. Actuators B Chem. 209, 287 (2015).10.1016/j.snb.2014.11.116 ↗
19. D.M. Jundale, P.B. Joshi, S. Sen, and V.B. Patil, Nanocrystalline CuO thin films: synthesis, microstructural and optoelectronic properties. J. Mater. Sci. Mater. Electron. 23, 1492 (2012).10.1007/s10854-011-0616-2 ↗
20. V. Saravanan, P. Shankar, G.K. Mani, and J.B.B. Rayappan, Growth and characterization of spray pyrolysis deposited copper oxide thin films: Influence of substrate and annealing temperatures. J. Anal. Appl. Pyrolysis 111, 272 (2015).10.1016/j.jaap.2014.08.008 ↗
21. G. Qiu, S. Dharmarathna, Y. Zhang, N. Opembe, H. Huang, and S.L. Suib, Facile microwave-assisted hydrothermal synthesis of CuO nanomaterials and their catalytic and electrochemical properties. J. Phys. Chem. C 116, 468 (2012).10.1021/jp209911k ↗
22. V. Dhanasekaran, T. Mahalingam, R. Chandramohan, J.K. Rhee, and J.P. Chu, Electrochemical deposition and characterization of cupric oxide thin films. Thin Solid Films 520, 6608 (2012).10.1016/j.tsf.2012.07.021 ↗
23. V. Ramya, K. Neyvasagam, R. Chandramohan, S. Valanarasu, and A.M.F. Benial, Studies on chemical bath deposited CuO thin films for solar cells application. J. Mater. Sci. Mater. Electron. 26, 8489 (2015).10.1007/s10854-015-3520-3 ↗
24. M.R. Das and P. Mitra, Influence of nickel incorporation on structural, optical and electrical characteristics of SILAR synthesized CuO thin films. J. Solgel Sci. Technol. 87, 59 (2018).10.1007/s10971-018-4711-1 ↗
25. M. Amanullah, Q.A. Javed, and S. Rizwan, Surfactant-assisted carbon doping in ZnO nanowires using Poly Ethylene Glycol (PEG). Mater. Chem. Phys. 180, 128 (2016).10.1016/j.matchemphys.2016.05.051 ↗
26. J. Zhang, K. Tse, M. Wong, Y. Zhang, and J. Zhu, A brief review of co-doping. Front. Phys. 11, 117405 (2016).10.1007/s11467-016-0577-2 ↗
27. S. Zhang, The microscopic origin of the doping limits in semiconductors and wide-gap materials and recent developments in overcoming these limits a review. J. Phys. Condens. Matter 14, 881 (2002).10.1088/0953-8984/14/34/201 ↗
28. A. Abdel-Galil, N.L. Moussa, and I.S. Yahia, Study on spray deposited Ni-doped CuO nanostructured thin films: microstructural and optical behavior. J. Mater. Sci. Mater. Electron. 33, 4984 (2022).10.1007/s10854-021-07688-3 ↗
29. Z.N. Kayani, W. Chaudhry, R. Sagheer, S. Riaz, and S. Naseem, Effect of Ce doping on crystallite size, band gap, dielectric and antibacterial properties of photocatalyst copper oxide Nano-structured thin films. Mater. Sci. Eng. 283, 115799 (2022).10.1016/j.mseb.2022.115799 ↗
30. A.A. Menazea and A.M. Mostafa, Ag doped CuO thin film prepared via pulsed laser deposition for 4-nitrophenol degradation. J. Environ. Chem. Eng. 8, 104104 (2020).10.1016/j.jece.2020.104104 ↗
31. Md.M.H. Babu, J. Podder, R.R. Tofa, and L. Ali, Effect of Co doping in tailoring the crystallite size, surface morphology and optical band gap of CuO thin films prepared via thermal spray pyrolysis. Surf. Interfaces 25, 101269 (2021).10.1016/j.surfin.2021.101269 ↗
32. R. Aydin and H. Cavusoglu, Influence of sodium dodecyl sulfate as a surfactant on the microstructural, morphological and optoelectronic characteristics of SILAR deposited CuO thin films. Mater. Res. Express 6, 086403 (2019).10.1088/2053-1591/ab1a08 ↗
33. K.C. Preetha, K.V. Murali, A.J. Ragina, K. Deepa, and T.L. Remadevi, Studies on gold doped lead sulphide thin films grown by Silar technique. AIP Conf. Proc. 1391, 749 (2011).10.1063/1.3643668 ↗
34. M. Anwar, Z.N. Kayani, and A. Hassan, An insight of physical and antibacterial properties of Au-doped ZnO dip coated thin films. Opt. Mater. 118, 111276 (2021).10.1016/j.optmat.2021.111276 ↗
35. L. Ouarez, A. Chelouche, T. Touam, R. Mahiou, D. Djouadi, and A. Potdevin, Au-doped ZnO sol-gel thin films: An experimental investigation on physical and photoluminescence properties. J. Lumin. 203, 222 (2018).10.1016/j.jlumin.2018.06.049 ↗
36. R. Daira, A. Kabir, B. Boudjema, and C. Sedrati, Structural and optical transmittance analysis of CuO thin films deposited by the spray pyrolysis method. Solid State Sci. 104, 106254 (2020).10.1016/j.solidstatesciences.2020.106254 ↗
37. R.K. Pandey, K. Ghosh, S. Mishra, J.P. Bange, P.K. Bajpai, and D.K. Gautam, Effect of film thickness on structural and optical properties of sol-gel spin coated aluminum doped zinc oxide (Al:ZnO) thin films. Mater. Res. Express. 5, 086408 (2018).10.1088/2053-1591/aad3a8 ↗
38. N. Gogurla, A.K. Sinha, S. Santra, S. Manna, and S.K. Ray, Multifunctional Au-ZnO plasmonic nanostructures for enhanced UV photodetector and room temperature NO sensing devices. Sci. Rep. 4, 1 (2014).10.1038/srep06483 ↗
39. H. Zhang, Y. Zhao, X. Geng, Y. Huang, Y. Li, H. Liu, Y. Liu, Y. Li, X. Wang, H. Tian, R. Liang, and T.L. Ren, Au nanoparticles-decorated surface Plasmon enhanced ZnO nanorods ultraviolet photodetector on flexible transparent mica substrate. IEEE J. Electron. Devices Soc. 7, 196 (2019).10.1109/JEDS.2018.2889888 ↗
40. A. Türüt, On current-voltage and capacitance-voltage characteristics of metal-semiconductor contacts. Turkish J. Phys. 44, 302 (2020).10.3906/fiz-2007-11 ↗
41. M. Yilmaz, A. Kocyigit, B.B. Cirak, H. Kacus, U. Incekara, and S. Aydogan, The comparison of Co/hematoxylin/n-Si and Co/hematoxylin/p-Si devices as rectifier for a wide range temperature. Mater. Sci. Semicond. Process. 113, 105039 (2020).10.1016/j.mssp.2020.105039 ↗
42. D.E. Yıldız, H.H. Gullu, L. Toppare, and A. Cirpan, Analysis of temperature-dependent forward and leakage conduction mechanisms in organic thin film heterojunction diode with fluorine-based PCBM blend. J. Mater. Sci. Mater. Electron. 31, 15233 (2020).10.1007/s10854-020-04088-x ↗
43. A. Kocyigit, M. Yılmaz, Ş Aydoğan, and Ü. İncekara, The effect of measurements and layer coating homogeneity of AB on the Al/AB/p-Si devices. J. Alloys Compd. 790, 388 (2019).10.1016/j.jallcom.2019.03.179 ↗
44. S.K. Cheung and N.W. Cheung, Extraction of Schottky diode parameters from forward current-voltage characteristics. Appl. Phys. Lett. 49, 85 (1986).10.1063/1.97359 ↗
45. H. Norde, A modified forward I-V plot for Schottky diodes with high series resistance. J. Appl. Phys. 50, 5052 (1979).10.1063/1.325607 ↗
46. I. Missoum, Y.S. Ocak, M. Benhaliliba, C.E. Benouis, and A. Chaker, Microelectronic properties of organic Schottky diodes based on MgPc for solar cell applications. Synth. Met. 214, 76 (2016).10.1016/j.synthmet.2016.01.004 ↗
47. A. Kocyigit, M. Yilmaz, S. Aydogan, U. Incekara, and Y. Sahin, The performance of chitosan layer in Au/n-Si sandwich structures as a barrier modifier. Polym. Test. 89, 106546 (2020).10.1016/j.polymertesting.2020.106546 ↗
48. A. Mekki, R.O. Ocaya, A. Dere, A.A. Al-Ghamdi, K. Harrabi, and F. Yakuphanoglu, New photodiodes based graphene-organic semiconductor hybrid materials. Synth. Met. 213, 47 (2016).10.1016/j.synthmet.2015.12.026 ↗
49. H. Kacus, M. Yilmaz, U. Incekara, A. Kocyigit, and S. Aydogan, The photosensitive activity of organic/inorganic hybrid devices based on Aniline Blue dye: Au nanoparticles (AB@ Au NPs). Sens. Actuators A Phys. 15(330), 112856 (2021).10.1016/j.sna.2021.112856 ↗