journal article·2022-04Open access

Double-Win Properties Response of Mechanical and Hydrogen Absorption in Melt-Spun Ti-Zr-Ni-Cr Amorphous Metals

Shuiming Huang, Huihui Song, Yuhu Hu, Kai Xu, Chao Zhou, Xueling Hou

Journal of Electronic Materials· Volume 51· Issue 4

Abstract

Abstract The effect of spinning rates on mechanical properties and hydrogen absorption/desorption properties of Ti47Zr31Ni14Cr8 amorphous ribbons have been investigated in the present work. A fully amorphous structure was confirmed by x-ray diffraction (XRD) and transmission electron microscopy (TEM) analysis of the ribbons obtained from spinning rates of 30 m s−1 to 45 m s−1. The uniformity of amorphous ribbons and their mechanical properties were improved with the increase in the spinning rate. Scanning electron microscopy (SEM) revealed that the fracture surface of amorphous ribbons had a cleavage feature and vein-like pattern when the spinning rates were 30 m s−1 and 45 m s−1, respectively. Because of the influence of flow units on the kinetic process of hydrogen absorption, the hydrogenation kinetics and hydrogen desorption capacity of amorphous ribbons were enhanced with the increased spinning rates. After the amorphous ribbons absorbed a large amount of hydrogen, ZrH2, TiH2, and (ZrTi)2Ni7 crystalline phases were formed from the amorphous matrix. Hydrogen promotes amorphous phase decomposition and the crystallinity of the new phases led to deterioration of the mechanical properties.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Hydrogen Storage and Materials · Metallic Glasses and Amorphous Alloys · Nanoporous metals and alloys

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (34)

Show source-provided references
1. S. Jan, Bulk metallic glasses. Phys. Today 66, 32 (2013).10.1063/PT.3.1885 ↗
2. C.A.C. Souza, D.V. Ribeiro, and C.S. Kiminami, Corrosion resistance of Fe-Cr-based amorphous alloys: an overview. J. Non Cryst. Solids 442, 56 (2016).10.1016/j.jnoncrysol.2016.04.009 ↗
3. S. Jan, Condensed-matter physics: glasses made from pure metals. Nature 512, 142 (2014).10.1038/nature13653 ↗
4. Q.M. Hu, and R. Yang, Mechanical properties of structural materials from first-principles. Curr. Opin. Solid State Mater. Sci. 10, 19 (2006).10.1016/j.cossms.2006.02.002 ↗
5. P. Tao, Y. Yang, Z. Xie, and Y. He, Research on friction and wear behavior of a bulk metallic glass under different sliding velocity. Mater. Lett. 156, 177 (2015).10.1016/j.matlet.2015.03.075 ↗
6. G. Tarjus, Materials science: metal turned to glass. Nature 448, 758 (2007).10.1038/448758a ↗
7. M. Janik-Czachor, Anodic behavior of Fe40Ni40B20 and Fe39Ni39B10Si12 amorphous alloys. Mater. Corros. 34, 47 (1983).10.1002/maco.19830340202 ↗
8. E.V. Boltynjuk, D.V. Gunderov, E.V. Ubyivovk, M.A. Monclús, L.W. Yang, J.M. Molina-Aldareguia, A.I. Tyurin, A. Kilmametov, A.A. Churakova, and A.Y. Churyumov, Enhanced strain rate sensitivity of Zr-based bulk metallic glasses subjected to high pressure torsion. J. Alloys Compd. 747, 595 (2018).10.1016/j.jallcom.2018.03.018 ↗
9. Y.X. Geng, Y.M. Wang, Z.R. Wang, J.B. Qiang, H.B. Wang, C. Dong, and O. Tegus, Formation and structure-property correlation of new bulk Fe-B-Si-Hf metallic glasses. Mater. Des. 106, 69 (2016).10.1016/j.matdes.2016.05.102 ↗
10. J.M. Yang, Z.Y. Zhao, J. Mu, and Y.D. Wang, Effect of pre-plastic-deformation on mechanical properties of TiZr-based amorphous alloy composites. Mater. Sci. Eng. A Struct. 716, 23 (2018).10.1016/j.msea.2018.01.042 ↗
11. M. Rajabi, A. Simchi, and P. Davami, Microstructure and mechanical properties of Al-20Si-5Fe−2X (X = Cu, Ni, Cr) alloys produced by melt-spinning. Mater. Sci. Eng. A Struct. 492, 443 (2008).10.1016/j.msea.2008.03.047 ↗
12. T. Sahoo, B. Majumdar, V. Srinivas, M. Srinivas, T.K. Nath, and G. Agarwal, Improved magnetoimpedance and mechanical properties on nanocrystallization of amorphous Fe68.5Si18.5Cu1Nb3B9 ribbons. J. Magn. Magn. Mater. 343, 13 (2013).10.1016/j.jmmm.2013.04.027 ↗
13. B. Jiang, J.X. Wang, L.F. Xu, C.Y. Qin, T.X. Liu, J.Y. Dai, and X.L. Hou, Tunable mechanical properties of Ti-Zr-Ni-Cr-V amorphous ribbons via different melt spinning speeds during rapid solidification process. Materials 11, 947 (2018).10.3390/ma11060947 ↗
14. B.Z. Liu, D.M. Liu, Y.M. Wua, L.Q. Li, and L.M. Wang, Hydrogen absorption in amorphous and quasicrystalline alloy powders. Int. J. Hydrog. Energy 32, 2429 (2007).10.1016/j.ijhydene.2006.11.007 ↗
15. T. Liu, H.L. Shen, T.W. Zhang, W. Li, C.G. Qin, and T. Zhang, The influence of hydrogen absorption on the electrical resistivity and mechanical properties of Zr-based amorphous alloy. J. Non-Cryst. Solids 365, 27 (2013).10.1016/j.jnoncrysol.2013.01.032 ↗
16. Y.H. Zhang, C.H. Song, H.P. Ren, Z.G. Li, F. Hu, and D.L. Zhao, Enhanced hydrogen storage kinetics of nanocrystalline and amorphous Mg 2N-type alloy by substituting Ni with Co. Trans. Nonferr. Met. Soc. 21, 2002 (2011).10.1016/S1003-6326(11)60963-1 ↗
17. Y.H. Zhang, Z.C. Jia, Z.M. Yuan, Y. Qin, Z.H. Hou, and D.L. Zhao, Hydrogen storage thermodynamics and kinetics of LaMg11Ni + x wt.% Ni (x = 100, 200) alloys synthesized by mechanical milling. Int. J. Mater. Res. 107, 348 (2016).10.3139/146.111345 ↗
18. E.B. Kashkarov, N.N. Nikitenkov, A.N. Sutygina, A. Obrosov, A. Manakhov, J. Polcak, and S. Weiss, Hydrogen absorption by Ti-implanted Zr-1Nb alloy. Int. J. Hydrog. Energy 43, 2484 (2018).10.1016/j.ijhydene.2017.12.003 ↗
19. X.L. Hou, Q.Q. Lu, X.C. Wang, B. Jiang, J.X. Wang, H. Xu, X.H. Tan, T.X. Liu, and J.Y. Dai, Atomic-scale structural evolution and crystallization mechanism of Ti-Zr-Ni-Cr amorphous ribbons during hydrogen absorption. J. Electron. Mater. 46, 3553 (2017).10.1007/s11664-017-5456-2 ↗
20. J.O. Fadonougbo, J.Y. Suh, S. Han, C.H. Shim, G.H. Kim, M.H. Kim, E. Fleury, and Y.W. Cho, Hydrogen-induced decomposition of Cu-Zr binary amorphous metallic alloys. J. Alloys Compd. 660, 456 (2016).10.1016/j.jallcom.2015.11.113 ↗
21. T. Liu, T.W. Zhang, W. Li, and G. Cheng, Hydrogen absorption and its influence on the thermal stability of Zr65Al10Ni10Cu15 amorphous alloy. Int. J. Hydrog. Energy 37, 9148 (2012).10.1016/j.ijhydene.2012.03.040 ↗
22. T.B. Zhang, Y.L. Zhang, M. Zhang, R. Hu, H.C. Kou, J.S. Li, and X.Y. Xue, Hydrogen absorption behavior of Zr-based getter materials with Pd-Ag coating against gaseous impurities. Int. J. Hydrog. Energy 41, 14778 (2016).10.1016/j.ijhydene.2016.06.073 ↗
23. N. Karatepe, and N. Yuca, Hydrogen adsorption on carbon nanotubes purified by different methods. Fuel Energy Abstr. 36, 11467 (2011).
24. H.J. Lin, L.Q. He, P. Zhang, Z.G. Zhang, S.P. Pan, and W. Li, Tailoring hydrogen storage properties of amorphous Mg65Cu25Y10 alloy via minor alloying addition of Ag. Intermetallics 97, 22 (2018).10.1016/j.intermet.2018.03.008 ↗
25. S. Sarker, D. Chandra, M. Hirscher, M. Dolan, D. Isheim, J. Wermer, D. Viano, M. Baricco, T.J. Udovic, D. Grant, O. Palumbo, A. Paolone, and R. Cantelli, Developments in the Ni-Nb-Zr amorphous alloy membranes. Appl. Phys. A Mater. 122, 1 (2016).10.1007/s00339-016-9650-5 ↗
26. F. Spaepen, A microscopic mechanism for steady state inhomogeneous flow in metallic glasses. Acta Metall. 25, 407 (2017).10.1016/0001-6160(77)90232-2 ↗
27. L.Z. Zhao, R.J. Xue, Y.Z. Li, W.H. Wang, and H.Y. Bai, Revealing localized plastic flow in apparent elastic region before yielding in metallic glasses. J. Appl. Phys. 118, 637 (2015).10.1063/1.4938567 ↗
28. S.T. Liu, W. Jiao, B.A. Sun, and W.H. Wang, A quasi-phase perspective on flow units of glass transition and plastic flow in metallic glasses. J. Non-Cryst. Solids 376, 76 (2013).10.1016/j.jnoncrysol.2013.04.053 ↗
29. Z. Wang, B.A. Sun, H.Y. Bai, and W.H. Wang, Evolution of hidden localized flow during glass-to-liquid transition in metallic glass. Nat. Commun. 5, 5823 (2013).10.1038/ncomms6823 ↗
30. D.J. Lacks, and M.J. Osborne, Energy landscape picture of overaging and rejuvenation in a sheared glass. Phys. Rev. Lett. 93, 255 (2004).10.1103/PhysRevLett.93.255501 ↗
31. L.Z. Zhao, R.J. Xue, Z.G. Zhu, Z. Lu, E. Axinte, W.H. Wang, and H.Y. Bai, Evaluation of flow units and free volumes in metallic glasses. J. Appl. Phys. 116, 259 (2014).
32. V. Chidambaram, X. Ling, and C. Bangtao, Titanium-based getter solution for wafer-level MEMS vacuum packaging. J. Electron. Mater. 42, 485 (2013).10.1007/s11664-012-2350-9 ↗
33. D. Turnbull, and M.H. Cohen, Free-volume model of the amorphous phase: glass transition. J. Chem. Phys. 34, 120 (1961).10.1063/1.1731549 ↗
34. H.J. Lin, M. He, S.P. Pan, L. Gu, H.W. Li, H. Wang, L.Z. Ouyang, J.W. Liu, T.P. Ge, D.P. Wang, W.H. Wang, E. Akiba, and M. Zhu, Towards easily tunable hydrogen storage via a hydrogen-induced glass-to-glass transition in Mg-based metallic glasses. Acta Mater. 120, 68 (2016).10.1016/j.actamat.2016.08.020 ↗