Microstructural and Micromechanical Characteristics of Tin-Based Solders Under Self-Propagating Exothermic Reaction Heating
Source abstract
Abstract
In this study, a rapid solder melting process has been examined through a self-propagating exothermic reaction using Al/Ni nanofoil as a localized heat source. Four kinds of tin-based solder preforms were partly melted under this process, and the thicknesses of the fusion zone in solder preforms around the Al/Ni nanofoil were experimentally analyzed. The microstructure and morphology of the fusion zone in different kinds of solder preforms were studied by metallographic analysis. In Sn42Bi58 solder, the mean grain size of Bi-rich phases in the fusion zone was finer than the original structure, and decreased from ~ 2.7 μm to ~ 0.8 μm away from the Al/Ni nanofoil. Similar trends of mean size of grains in the fusion zone were also found in the Sn, Sn-3 wt.%Ag-0.5 wt.%Cu(SAC), and SnPb solder preforms. The widths of the fusion zone in the Sn, SAC, SnPb, and SnBi solder preforms were 150 μm, 173 μm, 188 μm, and 233 μm, respectively. In addition, the nano-hardness and distribution in the fusion zones were evaluated. The results show that the value of nanohardness increased along with the decrease of distance from Al/Ni nanofoil. The average hardness and the lower and upper bounds of Sn, SnPb, SAC, and SnBi solder in the fusion zone are 0.260 (−0.045, +0.039) GPa, 0.246 (−0.059, +0.114) GPa, 0.260 (−0.014, +0.070) GPa, and 0.404 (−0.072, +0.134) GPa, respectively. The statistical significance of solder hardness is related to its alloy component, element content, and microstructure.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Electronic Packaging and Soldering Technologies · Intermetallics and Advanced Alloy Properties · Microstructure and mechanical properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (30)
Show source-provided references
1. Y.-C. Lin, M. Baum, M. Haubold, J. Fromel, M. Wiemer, T. Gessner, and M. Esashi, in International Solid-State Sensors, Actuators and Microsystems Conference (2009), pp. 244–247.
2. X. Qiu, J. Zhu, J. Oiler, C. Yu, Z. Wang, and H. Yu, J. Phys. D Appl. Phys. 42, 18 (2009).
3. J. Wang, E. Besnoin, O.M. Knio, and T.P. Weihs, Appl. Phys. Lett. 83, 19 (2003).
4. Yoosuf N. Picard and Steven M. Yalisove, Appl. Phys. Lett. 88, 14 (2006).10.1063/1.2191952 ↗
5. J.-H. Peng, J. Binner, and S. Bradshaw, Mater. Sci. Technol. 18, 12 (2002).10.1179/026708302225006142 ↗
6. E. Grigoryan, N.G. Elistratov, D.Yu. Kovalev, A.G. Merzhanov, A.N. Nosyrev, V.I. Ponomarev, A.S. Rogachev, V.I. Khvesyuk, and P.A. Tsygankov, Dokl. Phys. Chem. 381, 1 (2001).10.1023/A:1012952211911 ↗
7. D.P. Adams, M.A. Rodriguez, J.P. McDonald, M.M. Bai, E. Jones Jr, L. Brewer, and J.J. Moore, J. Appl. Phys. 106, 9 (2009).10.1063/1.3253591 ↗
8. A.J. Gavens, D. Van Heerden, A.B. Mann, M.E. Reiss, and T.P. Weihs, J. Appl. Phys. 87, 3 (2000).10.1063/1.372005 ↗
9. U. Gösele, H. Stenzel, T. Martini, J. Steinkirchner, D. Conrad, and K. Scheerschmidt, Appl. Phys. Lett. 67, 24 (1995).
10. A.J. Swiston Jr., T.C. Hufnagel, and T.P. Weihs, Scr. Mater. 48, 12 (2003).10.1016/S1359-6462(03)00164-7 ↗
11. A. Duckham, S.J. Spey, J. Wang, M.E. Reiss, T.P. Weihs, E. Besnoin, and O.M. Knio, J. Appl. Phys. 96, 4 (2004).10.1063/1.1769097 ↗
12. J. Braeuer, J. Besser, M. Wiemer, and T. Gessner, in International Solid-State Sensors, Actuators and Microsystems Conference (2011), pp. 1332–1335.
13. J. Zhang, F.-S. Wu, J. Zou, B. An, and H. Liu, in International Conference on Electronic Packaging Technology & High Density Packaging (2009), pp. 838–842.
14. G.D. Theodossiadis and M.F. Zaeh, Prod. Eng. 11, 4–5 (2017).
15. Z. Zhou, L. Mo, H. Liu, Y.C. Chan, and F. Wu, J. Electron. Mater. 47, 12 (2018).
16. J. Wang, E. Besnoin, A. Duckham, S.J. Spey, M.E. Reiss, O.M. Knio, and T.P. Weihs, J. Appl. Phys. 95, 1 (2004).10.1063/1.1631749 ↗
17. W. Zhu, F. Wu, B. Wang, E. Hou, P. Wang, C. Liu, and W. Xia, Microelectron. Eng. 128, 24 (2014).10.1016/j.mee.2014.05.035 ↗
18. J. Braeuer, J. Besser, M. Wiemer, and T. Gessner, Sens. Actuators A Phys. 188, 212 (2012).10.1016/j.sna.2012.01.015 ↗
19. B. Boettge, J. Braeuer, M. Wiemer, M. Petzold, J. Bagdahn, and T. Gessner, J. Micromech. Microeng. 20, 064018 (2010).10.1088/0960-1317/20/6/064018 ↗
20. R. Grieseler, T. Welker, J. Müller, and P. Schaaf, Phys. Status Solidi A 209, 512 (2012).10.1002/pssa.201127470 ↗
21. C. Pascal, R. Marin-Ayral, and J. Tedenac, J. Alloys Compd. 337, 221 (2002).10.1016/S0925-8388(01)01924-7 ↗
22. W.R. Osório, J.E. Spinelli, C.R.M. Afonso, L.C. Peixoto, and A. Garcia, Electrochim. Acta 56, 24 (2011).
23. U. Böyük and N. Maraşlı, Mater. Chem. Phys. 119, 3 (2010).10.1016/j.matchemphys.2009.09.022 ↗
24. G. Wei and L. Wang, in International Conference on Electronic Packaging Technology and High Density Packaging (2012), pp. 453–456.
25. R.M. Shalaby, Cryst. Res. Technol. 45, 4 (2010).10.1002/crat.201000022 ↗
26. F. Ochoa, J.J. Williams, and N. Chawla, JOM 55, 6 (2003).10.1007/s11837-003-0142-7 ↗
27. B.J. Briscoe, L. Fiori, and E. Pelillo, J. Phys. D Appl. Phys. 31, 19 (1998).10.1088/0022-3727/31/19/006 ↗
28. W.C. Oliver and G.M. Pharr, J. Mater. Res. 7, 1564 (1992).10.1557/JMR.1992.1564 ↗
29. H. Gao, Y. Huang, and W. Nix, Nat. Wiss. 86, 507 (1999).10.1007/s001140050665 ↗
30. Y.W. Bao, W. Wang, and Y.C. Zhou, Acta Mater. 52, 18 (2004).10.1016/j.actamat.2004.08.002 ↗