The Electrical and Thermal Analyses of Aluminized PET for Use in Thermal Layers
Source abstract
Abstract
In this study, using the physical vapor deposition (PVD) method by thermal evaporation technique, aluminum was deposited on a 13-μm polyethylene terephthalate (PET) substrate. A 150-nm-thick layer of aluminum was deposited on both sides of the substrate for use in thermal layers. The thermal properties, including the specific heat capacity, thermal conductivity coefficient, and thermal expansion coefficient, were measured by differential scanning calorimetry (DSC), thermomechanical analysis (TMA), and xenon flash analysis (XFA), respectively. The electrical analyses were carried out to determine the breakdown voltage, volumetric resistance, and dielectric strength, and the results were analyzed. The electrical capacitance of the sample (sample is capacitive with dielectric PET) was obtained through simulation. The dielectric constant and the electrical resistance were calculated using the obtained values of the two parameters and compared with the measurement results. The Al-PET temperature glass ( $$T_{\rm{g}}$$ ) value was measured by TMA and DSC analyses. A comparison of the results shows that they are the same.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Dielectric materials and actuators · Advanced Sensor and Energy Harvesting Materials · High voltage insulation and dielectric phenomena
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (28)
Show source-provided references
1. B. Bhushan, Fluid Mechanics, ed. By Frank Kreith (CRC Press, Boca Raton, FL, 1999), p. 211.
2. L. Eckertova, Physics of thin films (Boston, MA: Springer, 1977), pp. 9–52.10.1007/978-1-4615-7589-4 ↗
3. L.I. Maissel and M.H. Francombe, An Introduction to Thin Films (New York: Gordon and Breach Science Publishers, 1973), pp. 5–38.
4. K.N. Chopra and A.K. Maini, Thin films and their applications in military and civil sectors (Delhi: Defence Research and Development Organisation, Ministry of Defence, India, 2010), pp. 13–30.
5. D.E. Aspnes, Phys. Rev. B 26, 5313 (1982). https://doi.org/10.1016/0040-6090(82)90590-9.10.1016/0040-6090(82)90590-9 ↗
6. P.W. Bodowsky, Air filtering machinery with variable speed cleaning, (U.S. Patent US4461633, 1984).
7. A. El Shazly, D.A. Elhady, H. Metwally, and M. Seyam, Electrical Properties of Thin Films (1998). https://doi.org/10.1088/0953-8984/10/26/019.10.1088/0953-8984/10/26/019 ↗
8. J. Harrison, Investigation of reflective materials for the solar cooker (Solar Energy Web, 2001). https://www.fsec.ucf.edu/en/research/solarthermal/solar_cooker/documents/reflectivematerialsreport.pdf. Accessed 24 December 2001.
9. A. Ajji and N. Chapleau, J. Mater. Sci. 37, 3893 (2002). https://doi.org/10.1023/a:1019603421841.10.1023/a:1019603421841 ↗
10. C. Bach, X. Dauchy, and S. Etienne, in IOP Conference Series: Materials Science and Engineering (2009), p. 012005.10.1088/1757-899X/5/1/012005 ↗
11. B. Lepoittevin and P. Roger, Handbook of Engineering and Speciality Thermoplastics, ed. by S. Thomas, and P.M. Visakh (Wiley, France, 2011), p. 97.10.1002/9781118104729.ch4 ↗
12. M. Hassanpour Behbahani, H. Fallah, H. Esfandiary, M.R. Pakmanesh, and S.A. Mirjafari, Appl. Phys. A 126, 1 (2020). https://doi.org/10.1007/s00339-020-03532-3.10.1007/s00339-020-03532-3 ↗
13. E.L.G. Denardin, S. Tokumoto, and D. Samios, Rheol. Acta 45, 142 (2005). https://doi.org/10.1007/s00397-005-0004-z.10.1007/s00397-005-0004-z ↗
14. A. Conrad and O. Ganschow, Vacuum pump system, U.S. patent, US5733104A, 1998.
15. A. Chambers, Modern Vacuum Physics (CRC Press, London, 2004), pp. 11–22.10.1201/9780203492406 ↗
16. S. Kalogirou, The potential of solar industrial process heat applications. Appl. Energy 76, 337 (2003). https://doi.org/10.1016/S0306-2619(02)00176-9.10.1016/S0306-2619(02)00176-9 ↗
17. S. Gupta, M. Dixit, K. Sharma, and N. Saxena, Surf. Coat. Technol. 204, 661 (2009). https://doi.org/10.1016/j.surfcoat.2009.08.051.10.1016/j.surfcoat.2009.08.051 ↗
18. S. Lalitha, R. Sathyamoorthy, S. Senthilarasu, A. Subbarayan, and K. Natarajan, Mater. Trans. 46, 872 (2004). https://doi.org/10.1016/j.solmat.2004.01.017.10.1016/j.solmat.2004.01.017 ↗
19. M. Öhman, D. Persson, and C. Leygraf, Electrochim. Acta 52, 5159 (2007). https://doi.org/10.1016/j.porgcoat.2006.07.002.10.1016/j.porgcoat.2006.07.002 ↗
20. A.J. Welch and M.J. Van Gemert, Optical-thermal response of laser-irradiated tissue (Dordrecht: Springer, 2011), pp. 353–453.10.1007/978-90-481-8831-4 ↗
21. O.O. Onyejekwe, Comput. Chem. Eng. 26, 1621 (2002). https://doi.org/10.1016/S0098-1354(02)00143-6.10.1016/S0098-1354(02)00143-6 ↗
22. C.R. Jones and J. Porter, J. Text. Inst. Trans. 56, T498 (1965). https://doi.org/10.1080/19447026508662308.10.1080/19447026508662308 ↗
23. C. Uher, Thermal Conductivity (Boston, MA: Springer, 2004), pp. 21–91.10.1007/0-387-26017-X_2 ↗
24. C.M. Lopes and M.I. Felisberti, Thermal conductivity of PET/(LDPE/AI) composites determined by MDSC. Polym. Test. 23, 637 (2004). https://doi.org/10.1016/j.polymertesting.2004.01.013.10.1016/j.polymertesting.2004.01.013 ↗
25. H.-L. Engquist and P. Anderson, Phys. Rev. B 24, 1151 (1981). https://doi.org/10.1103/physrevb.24.1151.10.1103/physrevb.24.1151 ↗
26. M. Szostak, Mol. Cryst. Liq. Cryst. 416, 209 (2004)10.1080/15421400490481377 ↗
27. A. El Shazly, D.A. Elhady, H. Metwally, and M. Seyam, Electrical properties of thin films (1998). https://doi.org/10.1088/0953-8984/10/26/019.10.1088/0953-8984/10/26/019 ↗
28. A.L. Hughes and L.A. DuBridge, Photoelectric Phenomena, 1st ed. (New York: McGraw-Hill, 1932), pp. 38–113.