Quantitative Correlation between Electrical Resistivity and Microhardness of Cu-Ni-Mo Alloys via a Short-Range Order Cluster Model
Source abstract
Abstract
Strength and electrical resistivity are coupled in metal alloys as both are based upon a similar microstructure mechanism, but the quantitative relationship between them is not known due to the complex microstructures involved. The present work analyzes the dependence of hardness and electrical resistivity on solute contents for ternary [Moy/(y+12)Ni12/(y+12)]xCu100−x alloys (at.%), where x = 0.3–15.0 is the total solute content and y = 0.5–6.0 the ratio between Mo and Ni. The alloys are designed following the cluster-plus-glue-atom model to reach three distinct structural states, i.e., cluster solution state (y = 1), where Mo is dissolved via a chemical short-range order characterized by Mo-centered and Ni-nearest-neighbored [Mo1-Ni12] cluster, cluster solution state plus extra Ni solution (y 1). The measured electrical resistivity and microhardness data are correlated with these three structural states to reveal the property dependencies on solute contents. The cluster solution enhances the strength, without causing much increase in the electrical resistivity, as the solutes are organized into cluster-type local atomic aggregates that decrease dislocation mobility more strongly than electron scattering. Analogous to residual resistivity ρR, which indicates the change of resistivity with reference to pure Cu, residual microhardness HR and residual lattice constant aR are also defined. For the ideal cluster solution state (y = 1, Mo/Ni = 1/12), the mentioned three parameters are correlated with the total solute content x by ρR = 1.08·x (10−8 Ω m), HR = 1.50·x (Kgf mm−2), and aR = − 1.08·x (10−4 nm). From these, ρR = 0.72HR = − aR. Such simple relationships indicate that resistivity and strength are dependent on the same cluster-type solution mechanism and can be a good reference for evaluating strength and resistivity performance of Cu alloys.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and mechanical properties · Aluminum Alloys Composites Properties · Advanced Welding Techniques Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (30)
Show source-provided references
1. L. Lu, Y.F. Shen, X.H. Chen, L.H. Qian, and K. Lu, Science 304, 422 (2004).10.1126/science.1092905 ↗
2. S.Z. Han, S.H. Lim, S. Kim, J. Lee, M. Goto, H.G. Kim, B. Han, and K.H. Kim, Sci. Rep. 6, 30907 (2016).10.1038/srep30907 ↗
3. R.H. Pry and R.W. Hennig, Acta Metall. 2, 318 (1954).10.1016/0001-6160(54)90174-1 ↗
4. K.J. Cho and S.I. Hong, Met. Mater. Int. 18, 355 (2012).10.1007/s12540-012-2022-6 ↗
5. W.D. Callister, Materials Science and Engineering, An Introduction, 7th ed. (New York: Wiley, 2007), pp. 665–720.
6. T. Saito, T. Furuta, J.H. Hwang, S. Kuramoto, K. Nishino, N. Suzuki, R. Chen, A. Yamada, K. Ito, Y. Seno, T. Nonaka, H. Ikehata, N. Nagasako, C. Iwamoto, Y. Ikuhara, and T. Sakuma, Science 300, 464 (2003).10.1126/science.1081957 ↗
7. K. Lu, L. Lu, and S. Suresh, Science 324, 349 (2009).10.1126/science.1159610 ↗
8. T. Zhu and J. Li, Prog. Mater. Sci. 55, 710 (2010).10.1016/j.pmatsci.2010.04.001 ↗
9. W. Pfeiler, Acta Metall. 36, 2417 (1988).10.1016/0001-6160(88)90192-7 ↗
10. A.H. Cottrell, Report of a conference on strength of solids. 30 (1948).
11. J.C. Fisher, Acta Metall. 2, 9 (1954).10.1016/0001-6160(54)90087-5 ↗
12. S. Takeuchi, J. Phys. Soc. Jpn. 27, 929 (1969).10.1143/JPSJ.27.929 ↗
13. W. Pfeiler and R. Reihsner, Phys. Status Solidi A 97, 377 (1986).10.1002/pssa.2210970207 ↗
14. A. Van Den Beukel, Vacancies and Interstitials in Metals (Amsterdam: North-Holland, 1969), pp. 427–479.
15. A. Kapička and J. Polák, J. Phys. B. 22, 476 (1972).
16. T.H. Courtney, Mechanical Behavior of Materials, 2nd ed. (Grove: Waveland Press, 2005), p. 232.
17. J.M. Cowley, Phys. Rev. A 138, 1384 (1965).10.1103/PhysRev.138.A1384 ↗
18. H.M. Li, Y.J. Zhao, X.N. Li, D.Y. Zhou, and C. Dong, J. Phys. D Appl. Phys. 49, 035306 (2016).10.1088/0022-3727/49/3/035306 ↗
19. Y.J. Zhao, Master Dissertation Dalian University of Technology (2012).
20. A. Matthiessen and C. Vogt, Philos. Trans. R. Soc. Lond. 154, 167 (1864).10.1098/rstl.1864.0004 ↗
21. H.P. Anwar Ali, I. Radchenko, J. Zhou, L. Qing, and A. Budiman, J. Mater.: Des. Appl. (2017). https://doi.org/10.1177/1464420717695354 .10.1177/1464420717695354 ↗
22. A.S. Budiman, K.R. Narayanan, N. Li, J. Wang, N. Tamura, M. Kunz, and A. Misra, Mater. Sci. Eng. A 635, 6 (2015).10.1016/j.msea.2015.03.067 ↗
23. J.B. Gibson, Phys. Chem. Solids 1, 27 (1956).10.1016/0022-3697(56)90006-3 ↗
24. G.L. Hall, Phys. Rev. 116, 604 (1959).10.1103/PhysRev.116.604 ↗
25. A.E. Asch and G.L. Hall, Phys. Rev. 132, 1047 (1963).10.1103/PhysRev.132.1047 ↗
26. P.H. Gaskell, Acta Metall. 29, 1203 (1981).10.1016/0001-6160(81)90011-0 ↗
27. M. Yousuf, P.C. Sahu, H.K. Jajoo, S. Rajagopalan, and K.G. Rajan, J. Phys. F Met. Phys. 16, 373 (1986).10.1088/0305-4608/16/3/015 ↗
28. D. Han, Metal Hardness Testing Technical Manual (Changsha: Central South University Press, 2003), pp. 18–23.
29. C. Biselli, D.G. Morris, and N. Randall, Scr. Metall. Mater. 30, 1327 (1994).10.1016/0956-716X(94)90267-4 ↗
30. J.R. Groza and J.C. Gibeling, Mater. Sci. Eng. A 171, 115 (1993).10.1016/0921-5093(93)90398-X ↗