Quantitative Assessment of Dynamic Recovery Kinetics in Sn-5Sb Lead-Free Solder Alloy During Hot Working
Source abstract
Abstract
The deformation behavior of Sn-5Sb alloys was investigated using isothermal hot compression at 300 K, 330 K, 360 K and 400 K and strain rates of 0.01 s−1, 0.005 s−1, 0.001 s−1 and 0.0005 s−1. The recorded true stress–strain curves were obtained from load–stroke data and their quantitative characteristics were analyzed. Relationships between the flow stress, temperature and strain rate were expressed in terms of the conventional hyperbolic sine equation. By performing regression, 54 kJ/mol was determined as the average activation energy of deformation. Based on σ (dσ/de) versus σ curves, the coefficient of dynamic recovery (DRV) rate (r), saturated stress (σRV) and yield strength (σ0) under different thermomechanical conditions were computed. For the volume fractions of DRV, the modified Avrami type equation was derived as a function of the Zener–Hollomon parameter (Z) and the influence of deformation conditions on the kinetics of DRV was investigated in detail.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metallurgy and Material Forming · Powder Metallurgy Techniques and Materials · Aluminum Alloy Microstructure Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (18)
Show source-provided references
1. A.R. Geranmayeh, G. Nayyeri, and R. Mahmudi, Mater. Sci. Eng. A 547, 110 (2012).10.1016/j.msea.2012.03.093 ↗
2. R. Mahmudi, R. Alizadeh, and A.R. Geranmayeh, Scr. Mater. 64, 521 (2011).10.1016/j.scriptamat.2010.11.030 ↗
3. R. Mahmudi, A.R. Geranmayeh, and A. Rezaee-Bazzaz, Mater. Sci. Eng. 287, 293 (2007).10.1016/j.mseb.2007.01.033 ↗
4. Y. Du, C. Li, B. Huang, M. Tang, and C. Du, Solder. Surf. Mount Technol. 27, 7 (2015).10.1108/SSMT-07-2014-0015 ↗
5. G. Zeng, S. McDonald, and K. Nogita, Microelectron. Reliab. 52, 1036 (2012).
6. A.A. El-Daly, A.Z. Mohamad, A. Fawzy, and A.M. El-Taher, Mater. Sci. Eng. A 528, 1062 (2011).10.1016/j.msea.2010.11.001 ↗
7. A.A. El-Daly, A. Fawzy, A.Z. Mohamad, and A.M. El-Taher, J. Alloys Compd. 509, 4574 (2011).10.1016/j.jallcom.2011.01.109 ↗
8. R. Mahmudi, R. Alizadeh, and S. Azhari, Mater. Lett. 97, 44 (2013).10.1016/j.matlet.2013.01.078 ↗
9. M.J. Humphreys and M. Hatherly, Recrystallization and Related Annealing Phenomena, 2nd ed. (Amsterdam: Elsevier, 1995), pp. 415–445.
10. M. Zhou and M.P. Clode, Mech. Mater. 27, 63 (1998).10.1016/S0167-6636(97)00035-5 ↗
11. H. Abedi, A.Z. Hanzaki, Z. Liu, R. Xin, N. Haghdadi, and P. Hodgson, Mater. Des. 114, 55 (2016).10.1016/j.matdes.2016.10.044 ↗
12. S. Serajzadeh and A.K. Taheri, Mater. Des. 23, 271 (2002).10.1016/S0261-3069(01)00080-2 ↗
13. M.A. Mostafaei and M. Kazeminezhad, Mater. Sci. Eng. A 535, 216 (2012).10.1016/j.msea.2011.12.067 ↗
14. M.J. Esfandyarpour and R. Mahmudi, Mater. Sci. Eng. A 530, 402 (2011).10.1016/j.msea.2011.09.103 ↗
15. Z.N. Yang, F.C. Zhang, Y.Y. Xiao, and Z.G. Yan, Scr. Mater. 67, 959 (2012).10.1016/j.scriptamat.2012.08.026 ↗
16. A. Momeni and K. Dehghani, Mater. Sci. Eng. A 527, 5467 (2010).10.1016/j.msea.2010.05.079 ↗
17. E. Nes, K. Marthinsen, and Y. Brechet, Scr. Mater. 47, 607 (2002).10.1016/S1359-6462(02)00235-X ↗
18. M.A. Mostafaei and M. Kazeminezhad, Mater. Sci. Eng. A 544, 89 (2012).10.1016/j.msea.2012.02.093 ↗