Evaluation of Nd-Loaded SnO2:F Films Coated via Spray Pyrolysis
Source abstract
Abstract
Thin layers of single (F)- and double (F/Nd)-incorporated tin oxide have been coated on glass substrate via spray pyrolysis. The structural, morphological, electrical, and optical features of F-incorporated samples were evaluated depending on the Nd loading. X-ray diffraction analysis revealed that samples had tetragonal tin oxide structure with (211) and (200) preferential directions. The crystallite size and strain values varied from 37.98 nm and 1.21 × 10−3 to 52.12 nm and 1.88 × 10−3. Scanning electron microscopy analysis showed that the samples consisted of pyramidal, polyhedral, and needle-shaped granules. The lowest sheet resistance value of 1.22 Ω was found for 1.8 at.% Nd + 25 at.% F-coloaded SnO2. However, the widest optical bandgap of 4.01 eV was observed for the single 25 at.% F-loaded sample. The Urbach tail and figure of merit also changed in the ranges of 664 meV to 1296 meV and 6.4 × 10−2 Ω−1 to 2.3 × 10−3 Ω−1, respectively. The results presented herein indicate that the character of F-doped tin oxide films can be controlled by Nd loading and that these films could be useful for technological applications.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Gas Sensing Nanomaterials and Sensors · ZnO doping and properties · Transition Metal Oxide Nanomaterials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (57)
Show source-provided references
1. J. Rebholz, C. Dee, U. Weimar, and N. Barsan, Procedia Eng. 120, 83 (2015).10.1016/j.proeng.2015.08.571 ↗
2. P.S. Kolhe, P.M. Koinkar, N. Maiti, and K.M. Sonawane, Phys. B 524, 90 (2017).10.1016/j.physb.2017.07.056 ↗
3. M. Afuyoni, G. Nashed, and I.M. Nasser, Energy Procedia 6, 11 (2011).10.1016/j.egypro.2011.05.002 ↗
4. V.K. Gupta, R. Saravanan, S. Agarwal, F. Gracia, M.M. Khan, J. Qin, and R.V. Mangalaraja, J. Mol. Liq. 232, 423 (2017).10.1016/j.molliq.2017.02.095 ↗
5. H. Howari and I.B.I. Tomsah, Optik 144, 467 (2017).10.1016/j.ijleo.2017.05.098 ↗
6. O.S.I. Fayomi, O.O. Joseph, and A.P.I. Popoola, Energy Procedia 119, 910 (2017).10.1016/j.egypro.2017.07.144 ↗
7. M. Bhatnagar, S. Dhall, V. Kaushik, A. Kaushal, and B.R. Mehta, Sens. Actuators B 246, 336 (2017).10.1016/j.snb.2017.01.135 ↗
8. S.P. Choudhury, S.D. Gunjal, N. Kumari, K.D. Diwate, K.C. Mohite, and A. Bhattacharjee, Mater. Today Proc. 3, 1609 (2016).10.1016/j.matpr.2016.04.050 ↗
9. E. Elangovan, M.P. Singh, and K. Ramamurthi, Mater. Sci. Eng. B 113, 143 (2004).10.1016/S0921-5107(04)00385-X ↗
10. W.Y. Chung, C.H. Shim, S.D. Choi, and D.D. Lee, Sens. Actuators B 20, 139 (1994).10.1016/0925-4005(94)01173-7 ↗
11. A.V. Moholkar, S.M. Pawar, K.Y. Rajpure, P.S. Patil, and C.H. Bhosale, J. Phys. Chem. Solids 68, 1981 (2007).10.1016/j.jpcs.2007.06.024 ↗
12. M. Batzill and U. Diebold, Prog. Surf. Sci. 79, 47 (2005).10.1016/j.progsurf.2005.09.002 ↗
13. A. Debataraja, D.W. Zulhendri, B. Yuliarto, N. Hiskia, and B. Sunendar, Procedia Eng. 170, 60 (2017).10.1016/j.proeng.2017.03.011 ↗
14. P. Nunes, E. Fortunato, P. Tonello, F.B. Fernandes, P. Vilarinho, and R. Martins, Vacuum 64, 281 (2002).10.1016/S0042-207X(01)00322-0 ↗
15. Y. Fu, L. Wang, Y. Duan, L. Zou, and B. Ye, Talanta 168, 1 (2017).10.1016/j.talanta.2017.03.006 ↗
16. F. Chong, H. Jinli, G. Tianfu, W. Junbo, D. Bingjun, and Z. Jing, Rare Metal Mater. Eng. 45, 0869 (2016).10.1016/S1875-5372(16)30090-X ↗
17. Y. Huang, D. Li, J. Feng, G. Li, and Q. Zhang, J. Sol–Gel Sci. Technol. 54, 276 (2010).10.1007/s10971-010-2182-0 ↗
18. Z. Qignan, W. Sjuo, and M. Dengkui, Adv. Mater. Res. 150–151, 1043 (2011).
19. P.S. Shewale, S.I. Patil, and M.D. Uplane, Semicond. Sci. Technol. 25, 15008 (2010).10.1088/0268-1242/25/11/115008 ↗
20. Q. Chen, Y. Qian, Z. Chen, G. Zhou, and Y. Zhang, Thin Solid Films 264, 25 (1995).10.1016/0040-6090(95)06586-5 ↗
21. S. Bagherian and A.K. Zak, Mater. Sci. Semicond. Process. 56, 52 (2016).10.1016/j.mssp.2016.07.021 ↗
22. S. Nakao, N. Yamada, T. Hitosugi, Y. Hirose, T. Shimada, and T. Hasegawa, Phys. Status Solidi C 8, 543 (2011).10.1002/pssc.201000505 ↗
23. S. Muranaka and Y. Band, Bull. Inst. Chem. Res. 70, 430 (1992).
24. E.F. Keskenler, G. Turgut, S. Aydın, and S. Doğan, Optik 124, 4827 (2013).10.1016/j.ijleo.2013.02.038 ↗
25. E. Elangovan, M.P. Singh, M.S. Dharmaprakash, and K. Ramamurthi, J. Optoelectron. Adv. Mater. 6, 197 (2004).
26. T. Serin, N. Serin, S. Karadeniz, H. Sarı, N. Tugluoglu, and O. Pakma, J. Non Cryst. Solids 352, 209 (2006).10.1016/j.jnoncrysol.2005.11.031 ↗
27. M. Thirumoorthi and J.T.J. Prakash, Superlattices Microstruct. 89, 378 (2016).10.1016/j.spmi.2015.11.023 ↗
28. S.A. Yousif and J.M. Abass, Int. Lett. Chem. Phys. Astron. 13, 90 (2013).10.18052/www.scipress.com/ILCPA.18.90 ↗
29. H. Kim, R.C.Y. Auyeung, and A. Piqué, Thin Solid Films 516, 5052 (2008).10.1016/j.tsf.2007.11.079 ↗
30. D. Tatar, G. Turgut, and B. Düzgün, Rom. Rep. Phys. 58, 143 (2013).
31. A. Smith, J.M. Laurent, D.S. Smith, J.P. Bonnet, and R.R. Clemente, Thin Solid Films 266, 20 (1995).10.1016/0040-6090(95)06648-9 ↗
32. C. Agashe, M.G. Takwale, V.G. Bhide, S. Mahamuni, and S.K. Kulkarni, J. Appl. Phys. 70, 7382 (1991).10.1063/1.349733 ↗
33. E. Elangovan and K. Ramamurthi, Thin Solid Films 476, 231 (2005).10.1016/j.tsf.2004.09.022 ↗
34. E. Elangovan and K. Ramamurthi, Appl. Surf. Sci. 249, 183 (2005).10.1016/j.apsusc.2004.11.074 ↗
35. G. Gordillo, L.C. Moreno, W. De la Cruz, and P. Teheran, Thin Solid Films 252, 61 (1994).10.1016/0040-6090(94)90826-5 ↗
36. T. Abendroth, B. Schumm, S.A. Alajlan, A.M. Almogbel, G. Mäder, P. Härtel, H. Althues, and S. Kaskel, Thin Solid Films 624, 152 (2017).10.1016/j.tsf.2017.01.028 ↗
37. C.S. Barret and T.B. Massalski, Structure of Metals, Crystallographic Methods, Principles, and Data, 3rd revised ed. (Oxford: Pergamon, 1980).
38. S.A. Nasser, H.H. Afify, S.A. El-Hakim, and M.K. Zayed, Thin Solid Films 315, 327 (1998).10.1016/S0040-6090(97)00757-8 ↗
39. S.-H. Li, Z. Chu, F.-F. Meng, T. Luo, X.-Y. Hu, S.-Z. Huang, and Z. Jin, J. Alloys Compd. 688, 712 (2016).10.1016/j.jallcom.2016.07.248 ↗
40. M.M. Rashad and O.A. Fouad, Appl. Nanosci. 4, 379 (2014).10.1007/s13204-013-0207-z ↗
41. L.B. Freund and S. Suresh, Thin Film Materials: Stress, Defect Formation and Surface Evolution (Cambridge: Cambridge University Press, 2003).
42. Y.T. Prabhu, K.V. Rao, V.S.S. Kumar, and B.S. Kumari, World J. Nano Sci. Eng. 4, 21 (2014).10.4236/wjnse.2014.41004 ↗
43. V.D. Mote, Y. Purushotham, and B.N. Dole, J. Theor. Appl. Phys. 6, 6 (2012).10.1186/2251-7235-6-6 ↗
44. G. Turgut, E.F. Keskenler, S. Aydın, D. Tatar, E. Sonmez, S. Dogan, and B. Duzgun, Rare Metal 33, 433 (2014).10.1007/s12598-013-0055-8 ↗
45. J. Kaur, J. Shah, R.K. Kotnala, and K.C. Verma, Ceram. Int. 38, 5563 (2012).10.1016/j.ceramint.2012.03.075 ↗
46. F. el Haj Hassan, A. Alaeddine, M. Zoaeter, and I. Rachidi, Int. J. Mod. Phys. B 19, 4081 (2005).10.1142/S0217979205032644 ↗
47. L.Z. Liu, X.L. Wu, F. Gao, J.C. Shen, T.H. Li, and P.K. Chu, Solid State Commun. 151, 811 (2011).10.1016/j.ssc.2011.03.029 ↗
48. C. Xiong, Y. Xiong, H. Zhu, Y. Zhang, and Y. Liu, Sci. China Ser. A Math. 40, 1222 (1997).10.1007/BF02931842 ↗
49. C. Mrabet, A. Boukhachem, M. Amlouk, and T. Manoubi, J. Alloys Compd. 666, 392 (2016).10.1016/j.jallcom.2016.01.104 ↗
50. L.P. Chikhale, F.I. Shaikh, I.S. Mulla, and S.S. Suryavanshi, J. Mater. Sci. Mater. Electron. 28, 12063 (2017).10.1007/s10854-017-7018-z ↗
51. M.N. Rumyantseva, A.M. Gaskov, N. Rosman, T. Pagnier, and J.R. Morante, Chem. Mater. 17, 893 (2005).10.1021/cm0490470 ↗
52. M.-R. Yang and S.-Y. Chu, Integr. Ferroelectr. 78, 299 (2006).10.1080/10584580600663490 ↗
53. G. Turgut, E. Sonmez, and S. Duman, Mater. Sci. Semicond. Process. 30, 233 (2015).10.1016/j.mssp.2014.10.008 ↗
54. G. Turgut, Thin Solid Films 594, 56 (2015).10.1016/j.tsf.2015.10.011 ↗
55. J. Joseph, V. Mathew, J. Mathew, and K.E. Abraham, Turk. J. Phys. 33, 37 (2009).
56. G. Turgut and D. Tatar, Optics 145, 292 (2017).
57. P. Chetri and A. Choudhury, Phys. E 47, 257 (2013).10.1016/j.physe.2012.11.011 ↗