Interfacial Reaction of Molten Sn on a Strained Cu Electroplated Layer
Source abstract
Abstract
Interfacial reactions of molten Sn on a Cu electroplated layer with and without strain were investigated. A Cu layer electroplated on a rectangular Si substrate was subjected to tensile stress by bending the Si substrate on a three-point bending apparatus. Two intermetallic compounds, Cu6Sn5 and Cu3Sn, were formed at the Sn/Cu interface after reflow at 260°C for 10 min to 30 min, regardless of the strain. Top-view examination revealed that the tensile strain had significant effects on the surface morphology of the Cu6Sn5 grains. On the nonstrained Cu layer, ovoid-shaped Cu6Sn5 grains were formed first after soldering, but long, prismatic Cu6Sn5 grains precipitated on the existing ovoid-shaped grains after solidification in air. On the strained Cu layer, only ovoid-shaped Cu6Sn5 grains but no long, prismatic ones were found after solidification. A possible mechanism is proposed to explain the absence of long, prismatic Cu6Sn5 grains on the strained Cu layer.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Electronic Packaging and Soldering Technologies · 3D IC and TSV technologies · Advanced Welding Techniques Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (16)
Show source-provided references
1. S.W. Chen and C.H. Wang, J. Mater. Res. 22, 695 (2007).10.1557/jmr.2007.0093 ↗
2. K.S. Kim, S.H. Huh, and K. Suganuma, J. Alloys Compd. 352, 226 (2003).10.1016/S0925-8388(02)01166-0 ↗
3. K. Zeng and K.N. Tu, Mater. Sci. Eng. R 38, 55 (2002).10.1016/S0927-796X(02)00007-4 ↗
4. B. Wang, F.S. Wu, and Y.P. Wu, Solder. Surf. Mt. Technol. 23, 40 (2011).10.1108/09540911111099695 ↗
5. B. Lee, J. Park, S.J. Jeon, K.W. Kwon, and H.J. Lee, J. Electrochem. Soc. 157, H420 (2010).10.1149/1.3301931 ↗
6. L.H. Su, Y.W. Yen, C.C. Lin, and S.W. Chen, Mater. Trans. B. 28B, 927 (1997).10.1007/s11663-997-0020-8 ↗
7. T. Takenaka, S. Kano, M. Kajihara, N. Kurokawa, and K. Sakamoto, Mater. Sci. Eng. A 396, 115 (2005).10.1016/j.msea.2005.01.025 ↗
8. R.A. Gagliano and M.E. Fine, J. Electron. Mater. 32, 1441 (2003).10.1007/s11664-003-0113-3 ↗
9. J.W. Jang, C.Y. Liu, P.G. Kim, K.N. Tu, A.K. Mal, and D.R. Frear, J. Mater. Res. 15, 1679 (2000).10.1557/JMR.2000.0242 ↗
10. J.H.L. Pang, D.Y.R. Chong, and T.H. Low, IEEE Trans. Compon. Packag. Technol. 24, 705 (2001).10.1109/6144.974964 ↗
11. Y.J. Chen and C.M. Chen, J. Electron. Mater. 38, 415 (2009).10.1007/s11664-008-0619-9 ↗
12. Y.J. Chen and C.M. Chen, Mater. Lett. 63, 1517 (2009).10.1016/j.matlet.2009.04.006 ↗
13. W.K. Liao, C.M. Chen, M.T. Lin, and C.H. Wang, Scr. Mater. 65, 691 (2011).10.1016/j.scriptamat.2011.07.007 ↗
14. M. Yang, M.Y. Li, L. Wang, Y.G. Fu, J.M. Kim, and L. Weng, Mater. Lett. 65, 1506 (2011).10.1016/j.matlet.2011.02.056 ↗
15. J.F. Li, P.A. Agyakwa, and C.M. Johnson, Acta Mater. 59, 1198 (2011).10.1016/j.actamat.2010.10.053 ↗
16. H.K. Kim and K.N. Tu, Phys. Rev. B. 53, 16027 (1996).10.1103/PhysRevB.53.16027 ↗