A Comprehensive 3D Finite Element Model of a Thermoelectric Module Used in a Power Generator: A Transient Performance Perspective
Source abstract
Abstract
Thermoelectric power generator has potential for small-scale and distributed power generation because of its high durability and scalability. It is very important to realize that the transient behavior of thermoelectric modules (TEM) affects a thermoelectric generator’s response to dynamic working environments. Traditionally, researchers have used simplified models to describe the behavior of thermoelectric modules. In this paper we propose a comprehensive mathematical model that considers the effect of variations of chemical potential and carrier density, which are ignored by traditional models. Finite element models based on this new model are used to simulate the transient behavior of a thermoelectric module subjected to rapid changes in boundary temperature or working load. Simulation results show that transition times of thermoelectric modules affected by temperature change are much longer than those of modules affected by changes in electrical load resistance. Sudden changes in working temperature cause voltage overshoot of the TEM output, which, however, is not observed in responses to sudden changes of load resistance. Comparisons also show there are significant differences between the behavior of TEM predicted by use of this new comprehensive model and that predicted by use of traditional models, particularly for the high-temperature intrinsic ionization region and the low-temperature weak ionization region. This implies that chemical potential and carrier density variations, which are taken into account by this new model but ignored by traditional models, have major effects on the performance of TEM.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Thermoelectric Materials and Devices · Thermal Radiation and Cooling Technologies · Innovative Energy Harvesting Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (34)
Show source-provided references
1. D.M. Rowe, CRC Handbook of Thermoelectrics (Boca Raton: CRC Press, 1995).10.1201/9781420049718 ↗
2. B. Sherman, R.R. Heikes, and R.W. Ure Jr., J. Appl. Phys. 31, 1 (1960).10.1063/1.1735380 ↗
3. G.J. Snyder and T.S. Ursell, Phys. Rev. Lett. 91, 148301 (2003).10.1103/PhysRevLett.91.148301 ↗
4. G.D. Mahan, J. Appl. Phys. 87, 7326 (2000).10.1063/1.372988 ↗
5. M. Chen, L.A. Rosendahl, and T. Condra, Int. J. Heat Mass Transf. 54, 345 (2011).10.1016/j.ijheatmasstransfer.2010.08.024 ↗
6. M. Chen, L.A. Rosendahl, T.J. Condra, and J.K. Pedersen, IEEE Trans. Energy Convers. 24, 112 (2009).10.1109/TEC.2008.2005310 ↗
7. D. Ebling, M. Jaegle, M. Bartel, A. Jacquot, and H. Böttner, J. Electron. Mater. 38, 1456 (2009).10.1007/s11664-009-0825-0 ↗
8. G. Fraisse, J. Ramousse, D. Sgorlon, and C. Goupil, Energy Convers. Manag. 65, 351 (2013).10.1016/j.enconman.2012.08.022 ↗
9. H.H. Saber and M.S. El-Genk, AIP Conf. Proc. 608, 998 (2002).10.1063/1.1449830 ↗
10. D. Wee, Energy Convers. Manag. 52, 3383 (2011).10.1016/j.enconman.2011.07.004 ↗
11. A. Chakraborty, B.B. Saha, S. Koyama, and K.C. Ng, Int. J. Heat Mass Transf. 49, 3547 (2006).10.1016/j.ijheatmasstransfer.2006.02.047 ↗
12. G. Wu and X. Yu, Energy Convers. Manag. 86, 99 (2014).10.1016/j.enconman.2014.04.040 ↗
13. G.E. Hoyos, K.R. Rao, and D. Jerger, Energy Convers. 17, 23 (1977).10.1016/0013-7480(77)90053-5 ↗
14. A. Miner, A. Majumdar, and U. Ghoshal, Appl. Phys. Lett. 75, 1176 (1999).10.1063/1.124634 ↗
15. J. Meng, X. Wang, and X. Zhang, Appl. Energy 108, 340 (2013).10.1016/j.apenergy.2013.03.051 ↗
16. C. Cheng, S. Huang, and T. Cheng, Int. J. Heat Mass Transf. 53, 2001 (2010).10.1016/j.ijheatmasstransfer.2009.12.056 ↗
17. R. Yang, G. Chen, A.R. Kumar, G.J. Snyder, and J. Fleurial, Energy Convers. Manag. 46, 1407 (2005).10.1016/j.enconman.2004.07.004 ↗
18. K. Etori, Jpn. J. Appl. Phys. 8, 289 (1969).10.1143/JJAP.8.289 ↗
19. N. Alfonso and A.G. Milnes, Electr. Eng. 79, 443 (1960).10.1109/EE.1960.6432650 ↗
20. Y. Makino and T. Maruyama, Chem. Eng. Technol. 29, 711 (2006).10.1002/ceat.200600033 ↗
21. M. Naji, M. Alata, and M.A. Al-Nimr, Proc. Inst. Mech. Eng. Part A. Energ. 217, 615 (2003).
22. M. Alata, M.A. Al-Nimr, and M. Naji, Int. J. Thermophys. 24, 1753 (2003).10.1023/B:IJOT.0000004103.26293.0c ↗
23. A. Goker and B. Uyanik, Phys. Lett. A 376, 2735 (2012).10.1016/j.physleta.2012.07.025 ↗
24. E.E. Castillo, C.L. Hapenciuc, and T. Borca-Tasciuc, Rev. Sci. Instrum. 81, 044902 (2010).10.1063/1.3374120 ↗
25. A. Moser, L. Rendler, M. Kratschmer, and P. Woias, Proceedings of PowerMEMS 2010 (Leuven, Belgium, 2010), p. 431.
26. A. Moser, M. Erd, M. Kostic, K. Cobry, M. Kroener, and P. Woias, J. Electron. Mater. 41, 1653 (2012).10.1007/s11664-011-1894-4 ↗
27. S. Kumar, S.D. Heister, X. Xu, J.R. Salvador, and G.P. Meisner, J. Electron. Mater. 42, 665 (2013).10.1007/s11664-013-2471-9 ↗
28. M. Lossec, B. Multon, H.B. Ahmed, and C. Goupil, Eur. Phys. J. Appl. Phys. 52, 11103 (2010).10.1051/epjap/2010121 ↗
29. F.G. Stremler and P.E. Gray, Am. Inst. Electr. Eng. Part I 80, 367 (1961).
30. N.Q. Nguyen and K.V. Pochiraju, Appl. Therm. Eng. 51, 1 (2013).10.1016/j.applthermaleng.2012.08.050 ↗
31. S. Lineykin and S. Ben-Yaakov, IEEE Trans. Ind. Appl. 43, 505 (2007).10.1109/TIA.2006.889813 ↗
32. A. Bermúdez, D. Gómez, M.C. Muñiz, and P. Salgado, Adv. Comput. Math. 26, 39 (2007).10.1007/s10444-005-7470-9 ↗
33. D.M. Rowe, Thermoelectrics Handbook: Macro to Nano (Boca Raton: CRC press, 2006).
34. R.D. Barnard, Thermoelectricity in Metals and Alloys (London: Taylor & Francis, 1972).