journal article·2015-09

A Novel Method to Obtain Higher Deposition Rates of CdTe Using Low Temperature LPCVD for Surface Passivation of HgCdTe

Sneha Banerjee, Rajendra Dahal, Ishwara B. Bhat

Journal of Electronic Materials· Volume 44· Issue 9
Publisher page

Abstract

The deposition rate of CdTe passivation films has been increased greatly by the implementation of a novel design of a graphite cracker cell. This cracker cell, consisting of an integrated diffuser, facilitates the efficient cracking of precursors. CdTe deposition rate has been increased from ~50 nm/h (without any cracker cell) to ~420 nm/h using this novel experimental set-up. H2 flow through the main gas flow line has been increased to obtain a progressive increase in deposition rates. CdTe deposited on high aspect ratio HgCdTe samples showed adequate conformal coverage on the side walls and also on the bottom of the trenches. Microwave photoconductive decay measurements were done on planar and patterned HgCdTe substrates at 77 K to extract the minority carrier lifetimes. There was a significant improvement in the lifetime of planar HgCdTe samples after CdTe passivation, though patterned HgCdTe samples showed a minor improvement. An additional annealing step was conducted at 250°C for 20 min in the presence of H2 after the deposition of CdTe passivation films. Minority carrier lifetimes improved further post-annealing, probably due to the formation of a graded interface between CdTe and HgCdTe.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Semiconductor Detectors and Materials · Chalcogenide Semiconductor Thin Films · Semiconductor Quantum Structures and Devices

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (11)

Show source-provided references
1. Y. Nemirovsky and G. Bahir, J. Vac. Sci. Technol. A 7, 450 (1989).10.1116/1.576202 ↗
2. Y. Nemirovsky, N. Mainzer, and E. Weiss, Properties of Narrow Gap Cadmium Based Compounds, ed. P. Capper (London: INSPEC, IEE, 1994).
3. V. Kumar, R. Pal, P.K. Chaudhury, B.L. Sharma, and V. Gopal, J. Electron. Mater. 34, 1225 (2005).10.1007/s11664-005-0267-2 ↗
4. M.A. Kinch, State-of-the-Art Infrared Detector Technology (SPIE, 2014).10.1117/3.1002766 ↗
5. G. Bahir, V. Ariel, G. Garber, D. Rosenfeld, and A. Sher, Appl. Phys. Lett. 65, 2725 (1994).10.1063/1.112548 ↗
6. Y. Nemirovsky, N. Amir, and L. Djaloshinski, J. Electron. Mater. 24, 647 (1995).10.1007/BF02657974 ↗
7. V. Ariel, V. Garber, D. Rosenfeld, G. Bahir, V. Richter, N. Mainzer, and A. Sher, J. Electron. Mater. 24, 1169 (1995).10.1007/BF02653070 ↗
8. S. Banerjee, P.Y. Su, R. Dahal, I.B. Bhat, J.D. Bergeson, C. Blisset, F. Aqariden, and B. Hanyaloglu, J. Electron. Mater. 43, 3012 (2014).10.1007/s11664-014-3178-2 ↗
9. J.M. Borrego, R.J. Gutmann, N. Jensen, and O. Paz, Solid State Electron. 30, 195 (1987).10.1016/0038-1101(87)90149-3 ↗
10. A. Rogalski, K. Adamiec, and J. Rutkowski, Narrow Gap Semiconductor Photodiodes (SPIE, 2000).10.1117/3.PM77.ch2 ↗
11. R. Pal, A. Malick, V. Srivastav, B.L. Sharma, V. Dhar, B. Sreedhar, and H.P. Vyas, J. Electron. Mater. 35, 1793 (2006).10.1007/s11664-006-0159-0 ↗