journal article·2022-02

Enhanced Thermoelectric Performance of p-Type Bi0.5Sb1.5Te3 Nanocomposites Through Nanoflower Morphology

Fang Wu, Wei Wang

Journal of Electronic Materials· Volume 51· Issue 2
Publisher page

Abstract

In this work, p-type Bi0.5Sb1.5Te3 nanopowders with nanoflower morphology were successfully synthesized by a hydrothermal method. The nanopowders were then hot-pressed into bulk, and the thermoelectric properties of the pellets were examined. For comparison, Bi0.5Sb1.5Te3 nanopowders with nanoplate morphology and binary Bi2Te3/Sb2Te3 (0.5:1.5) nanocomposites were also prepared. The results showed that for the bulk made by nanopowders with nanoflower morphology, the microstructure consisted of tiny grains embedded in large particles. The larger grains in the bulk increased the electrical conductivity, and the energy filtering effect induced by the tiny grains increased the Seebeck coefficients, so the power factor of the Bi0.5Sb1.5Te3 samples made by nanoflowers was higher than that of the other samples. Meanwhile, the thermal conductivity of the Bi0.5Sb1.5Te3 samples made by nanoflowers was lower than that of the other samples due to the larger number of grain boundaries in the bulk. As a result, the ZT value of the bulk made by the Bi0.5Sb1.5Te3 samples with nanoflower morphology was higher than that of the other two samples for all testing temperatures. Here we provide a relatively simple synthesis route to produce bulk materials with reasonable microstructures to effectively improve the ZT.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Thermoelectric Materials and Devices · Thermal properties of materials · Thermal Radiation and Cooling Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (43)

Show source-provided references
1. J. He, and T.M. Tritt, Advances in thermoelectric materials research: Looking back and moving forward. Science 357, 1369 (2017).10.1126/science.aak9997 ↗
2. J. Mao, G. Chen, and Z.F. Ren, Thermoelectric cooling materials. Nat. Mater. 20, 454 (2021).10.1038/s41563-020-00852-w ↗
3. B. Xu, T.L. Feng, Z. Li, W. Zheng, and Y. Wu, Large-Scale, Solution-synthesized nanostructured composites for thermoelectric applications. Adv. Mater. 30, 1801904 (2018).10.1002/adma.201801904 ↗
4. D.K. Aswal, R. Basu, and A. Singh, Key issues in development of thermoelectric power generators: High figure-of-merit materials and their highly conducting interfaces with metallic interconnects. Energ. Convers. Manage. 114, 50 (2016).10.1016/j.enconman.2016.01.065 ↗
5. S. Twaha, J. Zhu, and Y.Y. Yan, A comprehensive review of thermoelectric technology: Materials, applications, modelling and performance improvement. Renew. Sust. Energ. Rev. 65, 698 (2016).10.1016/j.rser.2016.07.034 ↗
6. Y. Chen, X.N. Hou, C.Y. Ma, Y.K. Dou, and W.T. Wu, Review of development status of Bi2Te3-based semiconductor thermoelectric power generation. Adv. Mater. Sci. Eng. 1210562, 9 (2018).
7. C.X. Zhao, Z. Li, T.J. Fan, C. Xiao, and Y. Xie, Defects engineering with multiple dimensions in thermoelectric materials. Research 9652749, 23 (2020).
8. Z. Ma, J.T. Wei, P.S. Song, M.L. Zhang, L.L. Yang, J. Ma, W. Liu, F.H. Yang, and X.D. Wang, Review of experimental approaches for improving zT of thermoelectric materials. Mat. Sci. Semicon. Proc. 121, 105303 (2021).10.1016/j.mssp.2020.105303 ↗
9. D.A. Francisco, M.G. Marisol, S. David, and A. Cantareroet, Nanowires: A route to efficient thermoelectric devices. Physica E. 113, 213 (2019).10.1016/j.physe.2019.03.021 ↗
10. H.J. Goldsmid, Recent studies of bismuth telluride and its alloys. J. Appl. Phys. 32, 2198 (1961).10.1063/1.1777042 ↗
11. Y.X. Zhao, and C. Burda, Chemical synthesis of Bi0.5Sb1.5Te3 nanocrystals and their surface oxidation properties. Acs. Appl. Mater. Inter. 1, 1259 (2009).10.1021/am900148d ↗
12. X. Yan, B. Poudel, Y. Ma, W.S. Liu, G. Joshi, H. Wang, Y.C. Lan, D.Z. Wang, G. Chen, and Z.F. Ren, Experimental studies on anisotropic thermoelectric properties and structures of n-Type Bi2Te2.7Se0.3. Nano. Lett. 10, 3373 (2010).10.1021/nl101156v ↗
13. Y. Zheng, H.Y. Xie, Q. Zhang, A. Suwardi, X. Cheng, Y.F. Zhang, W. Shu, X.J. Wan, Z.L. Yang, Z.H. Liu, and X.F. Tang, Unraveling the critical role of melt-spinning atmosphere in enhancing the thermoelectric performance of p-Type Bi0.52Sb1.48Te3. ACS. Appl. Mater. Inter. 12, 36186 (2020).10.1021/acsami.0c09656 ↗
14. H.L. Zhuang, Y. Pana, F.H. Sun, J.F. Dong, J. Pei, A.B. Cai, H.H. Hu, H.C. Tang, and J.F. Li, Thermoelectric Cu-doped (Bi,Sb)2Te3: Performance enhancement and stability against high electric current pulse. Nano Energy 60, 857 (2019).10.1016/j.nanoen.2019.04.021 ↗
15. D. Zhang, J.D. Lei, W.B. Guan, Z. Ma, C. Wang, L.J. Zhang, Z.X. Cheng, and Y.X. Wang, Enhanced thermoelectric performance of BiSbTe alloy: Energy filtering effect of nanoprecipitates and the effect of SiC nanoparticles. J. Alloy. Compd. 784, 1276 (2019).10.1016/j.jallcom.2019.01.084 ↗
16. B. Xu, T.L. Feng, Z. Li, W. Zheng, and Y. Wu, Large-scale, solution-synthesized nanostructured composites for thermoelectric applications. Adv. Mater. 30, 1801904 (2018).10.1002/adma.201801904 ↗
17. F. Wu, H.Z. Song, F. Gao, W.Y. Shi, J.F. Jia, and X. Hu, Effects of different morphologies of Bi2Te3 nanopowders on thermoelectric properties. J. Electro. Mater. 42, 1140 (2013).10.1007/s11664-013-2541-z ↗
18. F. Wu, W. Wang, X. Hu, and M.S. Tang, Thermoelectric properties of I-doped n-type Bi2Te3-based material prepared by hydrothermal and subsequent hot pressing. Prog. Nat. Sci-Mater. 27, 20 (2017).
19. L.P. Hu, T.J. Zhu, Y.G. Wang, H.H. Xie, Z.J. Xu, and X.B. Zhao, Shifting up the optimum figure of merit of p-type bismuth telluride-based thermoelectric materials for power generation by suppressing intrinsic conduction. NPG. Asia. Mater. 6, e88 (2014).10.1038/am.2013.86 ↗
20. B. Madavall, H.S. Kim, C.H. Lee, D.S. Kim, and S.J. Hong, High thermoelectric figure of merit in p-Type (Bi2Te3)x(Sb2Te3)1–x alloys made from element-mechanical Alloying and Spark Plasma Sintering. J. Electro. Mater. 48, 416 (2019).10.1007/s11664-018-6706-7 ↗
21. L.J. Zhao, Y. He, H. Zhang, L.F. Yi, and J.R. Wu, Enhancing the thermoelectric property of Bi2Te3 through a facile design of interfacial phonon scattering J. Alloy. Compd. 768, 659 (2018).10.1016/j.jallcom.2018.07.324 ↗
22. J.P. Fu, S.Y. Song, X.G. Zhang, F. Cao, L. Zhou, X.Y. Lia, and H.J. Zhang, Bi2Te3 nanoplates and nanoflowers: Synthesized by hydrothermal process and their enhanced thermoelectric properties. Cryst. Eng. Comm. 14, 2159 (2012).10.1039/c2ce06348d ↗
23. Y.H.R. Ma, R. Heij, and A.E.C. Palmqvist, Compos. thermoelectric Mater. Embed. Nanopart. 48, 2767 (2013).
24. J. Li, Q. Tan, J.F. Li, D.W. Liu, F. Li, Z.Y. Li, M. Zou, and K. Wang, BiSbTe-based nanocomposites with high ZT: the effect of SiC nanodispersion on thermoelectric properties. Adv. Funct. Mater. 23, 4317 (2013).10.1002/adfm.201300146 ↗
25. R. Deng, X. Su, S. Hao, Z. Zheng, M. Zhang, H. Xie, W. Liu, Y. Yan, C. Wolverton, C. Uher, M.G. Kanatzidis, and X. Tang, High thermoelectric performance in Bi0.46Sb1.54Te3 nanostructured with ZnTe. Energy. Environ. Sci. 11, 1520 (2018).10.1039/C8EE00290H ↗
26. D. Suh, S. Lee, H. Mun, S.H. Park, K.H. Lee, S.W. Kim, J.Y. Choi, and S. Baik, Enhanced thermoelectric performance of Bi0.5Sb1.5Te3-expanded graphene composites by simultaneous modulation of electronic and thermal carrier transport. Nano Energy 13, 67 (2015).10.1016/j.nanoen.2015.02.001 ↗
27. S. Cao, Z.Y. Huang, F.Q. Zu, J. Xu, L. Yang, and Z.G. Chen, Enhanced thermoelectric properties of Ag-modified Bi0.5Sb1.5Te3 composites by a facile electroless plating method. ACS Appl. Mater. Inter. 9, 36478 (2017).10.1021/acsami.7b11989 ↗
28. O.C. Yelgel, and G. Srivastava, Thermoelectric properties of p-type (Bi2Te3)x (Sb2Te3)1–x single crystals doped with 3wt.% Te. J. Appl. Phys. 113, 073709 (2013).10.1063/1.4792653 ↗
29. Y.C. Dou, X.Y. Qin, D. Li, L.L. Li, T.H. Zou, and Q.Q. Wang, Enhanced thermopower and thermoelectric performance through energy filtering of carriers in (Bi2Te3)0.2(Sb2Te3)0.8 bulk alloy embedded with amorphous SiO2 nanoparticles. J. Appl. Phys. 114, 044906 (2013).10.1063/1.4817074 ↗
30. X. Zhang, X.Y. Ma, F.P. Zhang, P.X. Wu, Q.M. Lu, Y.Q. Liu, and J.X. Zhang, Synthesis and thermoelectric properties of nanostructured bismuth telluride alloys. Acta. Phys. Sin. 61, 04720 (2012).
31. W. Liu, X. Tan, K. Yin, H. Liu, X. Tang, J. Shi, Q. Zhang, and C. Uher, Convergence of conduction bands as a means of enhancing thermoelectric performance of n-type Mg2Si1-xSnx Solid solutions. Phys. Rev. Lett. 108, 166601 (2012).10.1103/PhysRevLett.108.166601 ↗
32. H.S. Kim, N.A. Heinz, Z.M. Gibbs, Y. Tang, S.D. Kang, and G.J. Snyder, High thermoelectric performance in (Bi0.25Sb0.75)2Te3 due to band convergence and improved by carrier concentration control. Mater. Today. 20, 452 (2017).10.1016/j.mattod.2017.02.007 ↗
33. R. Sehr, and L.R. Testardi, The optical properties of p-type Bi2Te3-Sb2Te3 alloys between 2–15 microns. J. Phys. Chem. Solid. 23, 1219 (1962).10.1016/0022-3697(62)90169-5 ↗
34. J. Li, Y. Wang, Y. Yan, C. Wang, and L. Li, Pressure effect on the electronic structure and thermoelectric properties of α-MgAgSb. Comput. Mater. Sci. 155, 450 (2018).10.1016/j.commatsci.2018.08.003 ↗
35. Y. Pan, T.R. Wei, Q. Cao, and J.F. Li, Mechanically enhanced p- and n-type Bi2Te3-based thermoelectric materials reprocessed from commercial ingots by ball milling and spark plasma sintering. Mate. Sci. Eng. B 197, 75 (2015).10.1016/j.mseb.2015.03.011 ↗
36. B. Poudel, Q. Hao, Y. Ma, Y. Lan, A. Minnich, B. Yu, X. Yan, D. Wang, A. Muto, D. Vashaee, X. Chen, J. Liu, M.S. Dresselhaus, G. Chen, and Z. Ren, High thermoelectric performance of nanostructured bismuth antimony telluride bulk alloys. Science 320, 634 (2008).10.1126/science.1156446 ↗
37. Y. Ma, Q. Hao, B. Poudel, Y.C. Lan, B. Yu, D.Z. Wang, G. Chen, and Z.F. Ren, Enhanced thermoelectric figure-of-merit in p-Type nanostructured bismuth Antimony tellurium alloys made from elemental chunks. Nano. Lett. 8, 2580 (2008).10.1021/nl8009928 ↗
38. H. Wu, J. Carrete, Z. Zhang, Y. Qu, Z. Shen, Z. Wang, L.D. Zhao, and J. He, Strong enhancement of phonon scattering through nanoscale grains in lead sulfide thermoelectrics. NPG Asia Mater. 6, e108 (2014).10.1038/am.2014.39 ↗
39. H.L. Zhuang, Y. Pana, F.-H. Sun, J. Dong, J. Pei, Asfandiyar, B. Cai, H. Hu, H. Tang, and J.-F. Li, Thermoelectric Cu-doped (Bi, Sb)2Te3: Performance enhancement and stability against high electric current pulse. Nano Energy 60, 857 (2019).10.1016/j.nanoen.2019.04.021 ↗
40. J.H. Qiu, Y.G. Yan, T.T. Luo, K.C. Tang, L. Yao, J. Zhang, M. Zhang, X.L. Su, G.J. Tan, H.Y. Xie, M.G. Kanatzidis, C. Uhe, and X.F. Tang, 3D Printing of highly textured bulk thermoelectric materials: mechanically robust BiSbTe alloys with superior performance. Energy Environ. Sci. 12, 3106 (2019).10.1039/C9EE02044F ↗
41. H. Qin, Y. Liu, Z. Zhang, Y. Wang, J. Cao, W. Cai, Q. Zhang, and J. Sui, Improved thermoelectric performance of p-type Bi0.5Sb1.5Te3 through Mn doping at elevated temperature. Mater. Today Phys. 6, 31 (2018).10.1016/j.mtphys.2018.07.002 ↗
42. D.S. Kim, R.Z. Du, S.Y. Yu, Y.W. Yin, S.N. Dong, Q. Li, S.E. Mohney, X.G. Li, and S. Tadigadapa, Enhanced thermoelectric efficiency in nanocrystalline bismuth telluride nanotubes. Nanotechnology 31, 365703 (2020).10.1088/1361-6528/ab97d2 ↗
43. D. Wu, L. Huang, P.-Z. Jia, X.H. Cao, Z.Q. Fan, W.X. Zhou, and K.Q. Chen, Tunable spin electronic and thermoelectric properties in twisted triangulene p-dimer junctions. Appl. Phys. Lett. 119, 063503 (2021).10.1063/5.0056393 ↗