journal article·2021-05

Impacts of Cu-Doping and Mg-Deficiency on Mg2Sn Thin Films Thermoelectric Properties

Mahsasadat Safavi, Nicolas Martin, Eric Aubry, Vincent Linseis, Alain Billard, Mohammad Arab Pour Yazdi

Journal of Electronic Materials· Volume 50· Issue 5
Publisher page

Abstract

Two groups of Mg-Sn thin films were deposited by magnetron co-sputtering of Mg, Sn, and Cu targets. Group I was Mg-Sn films with [Mg]/[Sn] = 2 and group II with [Mg]/[Sn] = 1.75. The effect of Mg-deficiency and Cu-doping on the structure and thermoelectric properties was investigated. Both groups were doped by different Cu concentrations (0 at.%, 0.5 at.%, and 1.5 at.%). The structure and morphology of the thin films were investigated. The stable face-centered cubic structure was only observed for undoped film of group I, while a mixture of face-centered cubic and metastable orthorhombic structures coexisted for other samples whatever the Cu content. Carrier concentration and mobility were measured to explain the electronic transport behaviors of the films. The bandgap energy for both groups was estimated by the Kubelka–Munk’s method. The influence of the Mg deficiency and Cu doping on the thermoelectric properties was discussed for a range of temperatures: 30–200°C. For both groups, the best figure-of-merit, ZT, was obtained at 200°C for samples doped with 0.5 at.% Cu with ZT = 0.07 for group I and ZT = 0.27 for group II.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Thermoelectric Materials and Devices · Heusler alloys: electronic and magnetic properties · Chalcogenide Semiconductor Thin Films

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (46)

Show source-provided references
1. J. Tani, and H. Kido, Physica B: Condens. Matter., 364, 218 (2005). https://doi.org/10.1016/j.physb.2005.04.01710.1016/j.physb.2005.04.017 ↗
2. X. Hu, D. Mayson, and M.R. Barnett, J Alloys Compd., 589, 485 (2014). https://doi.org/10.1016/j.jallcom.2013.11.09210.1016/j.jallcom.2013.11.092 ↗
3. C. Gayner, and K.K. Kar, Prog Mater Sci., 83, 330 (2016). https://doi.org/10.1016/j.pmatsci.2016.07.00210.1016/j.pmatsci.2016.07.002 ↗
4. G. Jiang, J. He, T. Zhu, C. Fu, X. Liu, L. Hu, and X. Zhao, Adv Funct Mater., 24, 3776 (2014). https://doi.org/10.1002/adfm.20140012310.1002/adfm.201400123 ↗
5. D. Cederkrantz, N. Farahi, K.A. Borup, B.B. Iversen, M. Nygren, and A.E.C. Palmqvist, J Appl Phys., 111, 023701 (2012). https://doi.org/10.1063/1.367551210.1063/1.3675512 ↗
6. W. Liu, X. Tan, K. Yin, H. Liu, X. Tang, J. Shi, Q. Zhang, and C. Uher, Phys Rev Lett, 108, 166601 (2012). https://doi.org/10.1103/PhysRevLett.108.16660110.1103/PhysRevLett.108.166601 ↗
7. R. Santos, M. Nancarrow, S. X. Dou, and S. Aminorroaya Yamini. Sci Rep. 7, 3988 (2017). https://doi.org/10.1038/s41598-017-04348-7.10.1038/s41598-017-04348-7 ↗
8. U. Saparamadu, J. Mao, K. Dahal, H. Zhang, F. Tian, S. Song, W. Liu, and Z. Ren, Acta Mater., 124, 528 (2017). https://doi.org/10.1016/j.actamat.2016.10.07710.1016/j.actamat.2016.10.077 ↗
9. J. Bourgeois, J. Tobola, B. Wiendlocha, L. Chaput, P. Zwolenski, D. Berthebaud, F. Gascoin, Q. Recour, and H. Scherrer, Funct Mater Lett., 6, 1340005 (2013). https://doi.org/10.1142/S179360471340005510.1142/S1793604713400055 ↗
10. M. Ioannou, G.S. Polymeris, E. Hatzikraniotis, K.M. Paraskevopoulos, and T. Kyratsi, J Phys Chem Solids., 75, 984 (2014).https://doi.org/10.1016/j.jpcs.2014.04.00810.1016/j.jpcs.2014.04.008 ↗
11. S.M. Choi, T.H. An, W.S. Seo, C. Park, I.H. Kim, and S.U. Kim, J Electron Mater., 41, 1071 (2012). https://doi.org/10.1007/s11664-012-1985-x10.1007/s11664-012-1985-x ↗
12. J.I. Tani, and H. Kido, Physica B: Condens. Matter., 407, 3493 (2012). https://doi.org/10.1016/j.physb.2012.05.00810.1016/j.physb.2012.05.008 ↗
13. R.B. Song, T. Aizawa, and J.Q. Sun, Mater Sci Eng B., 136, 111 (2007). https://doi.org/10.1016/j.mseb.2006.09.01110.1016/j.mseb.2006.09.011 ↗
14. H.Y. Chen, and N. Savvides, J Electron Mater., 38, 1056 (2009). https://doi.org/10.1007/s11664-008-0630-110.1007/s11664-008-0630-1 ↗
15. H.Y. Chen, N. Savvides, T. Dasgupta, C. Stiewe, and E. Mueller, Phys Status Solidi., 207, 2523 (2010). https://doi.org/10.1002/pssa.20102611910.1002/pssa.201026119 ↗
16. H. Le-Quoc, A. Lacoste, E.K. Hlil, A. Bès, T.T. Vinh, D. Fruchart, and N. Skryabina, J Alloys Compd., 509, 9906 (2011). https://doi.org/10.1016/j.jallcom.2011.07.08510.1016/j.jallcom.2011.07.085 ↗
17. T.H. An, S.M. Choi, I.H. Kim, S.U. Kim, W.S. Seo, J.Y. Kim, and C. Park, Renew. Energy., 42, 23 (2012). https://doi.org/10.1016/j.renene.2011.09.03010.1016/j.renene.2011.09.030 ↗
18. R. R. Varma, S. R. Kada, and M. R. Barnett, J Alloys Compd. 757 (2018). https://doi.org/10.1016/j.jallcom.2018.05.054.10.1016/j.jallcom.2018.05.054 ↗
19. J. Tani, T. Shinagawa, and M. Chigane, J Electron Mater., 48, 3330 (2019). https://doi.org/10.1007/s11664-019-07093-x10.1007/s11664-019-07093-x ↗
20. M. Safavi, N. Martin, V. Linseis, F. Palmino, F. Chérioux, A. Billard, and M. Arab Pour Yazdi, J Alloys Compd, 797, 1078 (2019). https://doi.org/10.1016/j.jallcom.2019.05.214.10.1016/j.jallcom.2019.05.214 ↗
21. J. Tani, and H. Ishikawa, Thin Solid Films, 692, 137601 (2019). https://doi.org/10.1016/j.tsf.2019.13760110.1016/j.tsf.2019.137601 ↗
22. C.A. Gould, N.Y.A. Shammas, S. Grainger, and I. Taylor, Mater Sci Eng B, 176, 316 (2011). https://doi.org/10.1016/j.mseb.2010.09.01010.1016/j.mseb.2010.09.010 ↗
23. J. Lopez, R. Rios, F. Bao, and G. Wang, Futur. Gener Comput Syst., 75, 46 (2017). https://doi.org/10.1016/j.future.2017.04.04510.1016/j.future.2017.04.045 ↗
24. D. Zhao, M. Zuo, and H. Geng, Intermetallics, 31, 321 (2012). https://doi.org/10.1016/j.intermet.2012.07.00710.1016/j.intermet.2012.07.007 ↗
25. Y.F. Yamada, A. Ohtomo, and M. Kawasaki, Appl Surf Sci., 254, 768 (2007). https://doi.org/10.1016/j.apsusc.2007.04.08910.1016/j.apsusc.2007.04.089 ↗
26. J. Chen, Y. Zhou, X. Ke, Y. Lv, Y. Li, S. Populoh, N. Chen, X. Shi, L. Chen, and Y. Jiang, Mater Des., 97, 7 (2016). https://doi.org/10.1016/j.matdes.2016.02.06610.1016/j.matdes.2016.02.066 ↗
27. K. Park, F. Xiao, B.Y. Yoo, Y. Rheem, and N.V. Myung, J Alloys Compd., 485, 366 (2009). https://doi.org/10.1016/j.jallcom.2009.05.10610.1016/j.jallcom.2009.05.106 ↗
28. H. You, S.H. Baek, K.C. Kim, O.J. Kwon, J.S. Kim, and C. Park, J Cryst Growth., 346, 17 (2012). https://doi.org/10.1016/j.jcrysgro.2012.02.03310.1016/j.jcrysgro.2012.02.033 ↗
29. D. Zhao, S. Bai, Q. Ma, M. Zuo, and X. Teng, Corros Sci., 98, 63 (2015). https://doi.org/10.1016/j.corsci.2015.05.01110.1016/j.corsci.2015.05.011 ↗
30. P. Bellanger, S. Gorsse, G.B. Granger, C. Navone, A. Redjaimia, and S. Vivès, Acta Mater. 95, 102 (2015). https://doi.org/10.1016/j.actamat.2015.05.01010.1016/j.actamat.2015.05.010 ↗
31. D. Zhao, M. Zuo, Z. Wang, X. Teng, and H. Geng, Appl Surf Sci., 305, 86 (2014). https://doi.org/10.1016/j.apsusc.2014.02.17310.1016/j.apsusc.2014.02.173 ↗
32. M. Arab Pour Yazdi, N. Martin, C. Petitot, K. Neffaa, F. Palmino, F. Cherioux, and A. Billard, Coatings, 8, 380 (2018). https://doi.org/10.3390/coatings8110380.10.3390/coatings8110380 ↗
33. M.V. Daniel, M. Friedemann, J. Franke, and M. Albrecht, Thin Solid Films, 589, 203 (2015). https://doi.org/10.1016/j.tsf.2015.05.02410.1016/j.tsf.2015.05.024 ↗
34. M. Arab Pour Yazdi, P. Briois, F. Lapostolle, and A. Billard, ECS Trans., 7, 2313 (2007). https://doi.org/10.1149/1.2729350.10.1149/1.2729350 ↗
35. M. Arab Pour Yazdi, N. Fenineche, E. Aubry, A. Kaibi, and A. Billard, J Alloys Compd, 550, 252 (2013). https://doi.org/10.1016/j.jallcom.2012.09.136.10.1016/j.jallcom.2012.09.136 ↗
36. A.J. Guthrie, R. Narayanaswamy, and D.A. Russell, Analyst, 113, 457 (1988). https://doi.org/10.1039/an988130045710.1039/an9881300457 ↗
37. L. Chuang, D.Y. Wang, T.T. Tan, M.H.N. Assadi, and S. Li, Thin Solid Films, 520, 6226 (2012). https://doi.org/10.1016/j.tsf.2012.05.07110.1016/j.tsf.2012.05.071 ↗
38. V. Linseis, F. Völklein, H. Reith, K. Nielsch, and P. Woias, Rev Sci Instrum., 89, 015110 (2018). https://doi.org/10.1063/1.500580710.1063/1.5005807 ↗
39. G. Urretavizcaya, and G.O. Meyer, J Alloys Compd., 339, 211 (2002). https://doi.org/10.1016/S0925-8388(01)02001-110.1016/S0925-8388(01)02001-1 ↗
40. S. Lardjane, M. Arab Pour Yazdi, N. Martin, C. Bellouard, N. E. Fenineche, A. Schuler, G. Merad, and A. Billard, Mater. Chem. Phys., 161, 26 (2015). https://doi.org/10.1016/j.matchemphys.2015.04.037.10.1016/j.matchemphys.2015.04.037 ↗
41. X. Liu, L. Xi, W. Qiu, J. Yang, T. Zhu, X. Zhao, and W. Zhang, Adv Electron Mater., 2, 1500284 (2016). https://doi.org/10.1002/aelm.20150028410.1002/aelm.201500284 ↗
42. N. Savvides, and H.Y. Chen, J Electron Mater., 39, 2136 (2010). https://doi.org/10.1007/s11664-009-0978-x10.1007/s11664-009-0978-x ↗
43. F.K. Shan, and Y.S. Yu, J Eur Ceram Soc., 24, 1869 (2004). https://doi.org/10.1016/S0955-2219(03)00490-410.1016/S0955-2219(03)00490-4 ↗
44. E.M. Levin, Phys Rev B, 93, 245202 (2016). https://doi.org/10.1103/physrevb.93.24520210.1103/physrevb.93.245202 ↗
45. G.J. Snyder, and E.S. Toberer, Nat. Mater., 7, 105 (2008). https://doi.org/10.1038/nmat209010.1038/nmat2090 ↗
46. H. Le-Quoc, A. Lacoste, S. Béchu, A. Bès, D. Bourgault, and D. Fruchart, J Alloys Compd., 538, 73 (2012). https://doi.org/10.1016/j.jallcom.2012.06.00310.1016/j.jallcom.2012.06.003 ↗