Dispersion of ZnO Nanocrystals Using Ammonium Polycarboxylate (AMP) for the Fabrication of ZnO-Based Ceramics
Source abstract
Abstract
The effects of ammonium polycarboxylate (AMP) on the dispersion of zinc oxide nanopowders were investigated in this study. Good dispersibility and stability in ZnO suspension with a dispersant content of 0.5 wt.% at pH 10 was observed by field emission scanning electron microscopy, and was confirmed by sedimentation experiments. The adsorption state of AMP on the surface of nano-sized ZnO powder was examined by Fourier transform infrared spectroscopy. For the ZnO nanopowders with various AMP amounts in the alkaline region, a maximum absolute zeta potential of 55.8 mV was measured at pH 10, which correlated well with the saturation amount of adsorbed AMP. Compacted varistor discs were prepared from the nano-origin ZnO powders before and after AMP absorption, showing sintered densities of 97.6% and 98.4%, respectively. The advantages of AMP were clearly seen in grain structuring, in addition to the enhanced densification and homogeneous microstructures for obtaining a high nonlinear coefficient.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: ZnO doping and properties · Copper-based nanomaterials and applications · Gas Sensing Nanomaterials and Sensors
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (22)
Show source-provided references
1. M. Zhang, H. Zhang, and L. Li, J. Alloys Compd. 744, 364 (2018).10.1016/j.jallcom.2018.02.109 ↗
2. M.H. Kathawala, K.W. Ng, and S.C.J. Loo, J. Nanopart. Res. 17, 263 (2015).10.1007/s11051-015-3068-4 ↗
3. J. Song, L. Liu, and X.F. Wang, J. Mater. Chem. A 5, 13439 (2017).10.1039/C7TA03331A ↗
4. J. He, X. Li, and Q. Zhu, Ceram. Int. 42, 9737 (2016).10.1016/j.ceramint.2016.03.064 ↗
5. YuG Trifonov, A.D. Shlyapin, AYu Omarov, and V.P. Tarasovskii, Refract. Ind. Ceram 56, 201 (2015).10.1007/s11148-015-9813-5 ↗
6. X.L. Fu, H. Feng, and Z.J. Peng, Key Eng. Mater. 633, 308 (2014).10.4028/www.scientific.net/KEM.633.308 ↗
7. H.S. Woo, C.W. Na, and I.D. Kim, Nanotechnology 23, 245501 (2012).10.1088/0957-4484/23/24/245501 ↗
8. S. Balachandran and M. Swaminathan, J. Phys. Chem. C 116, 26306 (2012).10.1021/jp306874z ↗
9. M. Dorraj, A. Zakaria, and Y. Abdollahi, Sci. World J. 2014, 741034 (2014).10.1155/2014/741034 ↗
10. R.K. Sendi, A. Munshi, and S. Mahmud, Superlattice. Microst. 69, 212 (2014).10.1016/j.spmi.2014.02.012 ↗
11. A.C. Malcolm, J.M. Parnis, and A.J. Vreugdenhil, J. Non-Cryst. Solids. 357, 1203 (2011).10.1016/j.jnoncrysol.2010.11.012 ↗
12. S. Liufu, H. Xiao, and Y. Li, J. Colloid Interface Sci. 281, 155 (2005).10.1016/j.jcis.2004.08.075 ↗
13. K. Gan, J. Xu, and Y. Lu, J. Eur. Ceram. Soc. 37, 891 (2017).10.1016/j.jeurceramsoc.2016.10.009 ↗
14. J. Zhigang, Z. Le, and Z. Fangzheng, Ceram. Int. 44, 16859 (2018).10.1016/j.ceramint.2018.06.122 ↗
15. J. Liu, X. Wu, and M. Wang, J. Electron. Mater. 48, 8024 (2019).10.1007/s11664-019-07641-5 ↗
16. H. Guanghua, P. Zhidong, and W. Yanmin, Colloid Surface A 58, 591 (2018).
17. Y.W. Zhang, M. Tang, and X. Jin, Solid-State Sci. 5, 435 (2003).10.1016/S1293-2558(03)00043-8 ↗
18. Z. Guo, J. Xiong, and M. Yang, J. Alloys Compd. 493, 362 (2010).10.1016/j.jallcom.2009.12.103 ↗
19. T.T. Liu, M.H. Wang, and H. Su, J. Electron. Mater. 44, 10 (2015).
20. H. Foratirad, H.R. Baharvandi, and M.G. Maragheh, Int. J. Refract. Met. H. 56, 96 (2016).10.1016/j.ijrmhm.2015.12.007 ↗
21. T.H. Ho, S.J. Chang, and C.C. Li, Mater. Chem. Phys. 172, 1 (2016).10.1016/j.matchemphys.2016.01.060 ↗
22. Y. Xiong, J. Hu, and Z. Shen, J. Eur. Ceram. Soc. 33, 2087 (2013).10.1016/j.jeurceramsoc.2013.03.015 ↗