journal article·2020-02

Effect of Simultaneous Replacement of Fe with Zr and Ni in a Mechanically Alloyed Multicomponent Fe-Based Amorphous Alloy

Zahra Allafe Razzaghi, Abbas Kianvash, Abolfazl Tutunchi

Journal of Electronic Materials· Volume 49· Issue 2
Publisher page

Abstract

In this study, Fe-based amorphous powder with a composition of Fe40 Ni25Zr10Si10B15 (compound Q) was prepared by a partial replacement of Fe with Zr and Ni in a Fe75Si10B15 (compound P) via a mechanical alloying route. This substitution led to a decrease in amorphization time and consequently a significant improvement in thermal stability. The structure and thermal properties of the prepared powders were investigated by x-ray diffraction (XRD) pattern and differential scanning calorimetry (DSC), respectively. XRD and DSC results revealed that complete amorphization is achieved after 50 h of milling and glass forming ability width (ΔTx) increases from 50°C to 66°C by substitution of Fe with Zr and Ni in compound P. Magnetic properties of the samples, investigated by vibrating sample magnetometry, indicated that in spite of a negligible decrease in saturation magnetization (Ms) by Fe replacement with Zr and Ni, the coercivity (Hc) shows a positive response to this change as a soft magnetic material, decreasing from 35 Oe to 15 Oe.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metallic Glasses and Amorphous Alloys · Magnetic Properties of Alloys · Electromagnetic wave absorption materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (30)

Show source-provided references
1. R. Babilas and R. Nowosielski, Arch. Mater. Sci. Eng. 44, 5 (2010).
2. T.R. Anantharaman, Metallic Glasses: Production, Properties and Applications (Zurich: Trans Tech Publ, 1984).10.4028/www.scientific.net/RC.5 ↗
3. A. Inoue, Acta Mater. 48, 279 (2000).10.1016/S1359-6454(99)00300-6 ↗
4. A. Inoue, B. Shen, and C. Chang, Intermetallics 14, 936 (2006).10.1016/j.intermet.2006.01.038 ↗
5. F. Wang, A. Inoue, F.L. Kong, S.L. Zhu, E. Shalaan, F. Al-Marzouki, W.J. Botta, C.S. Kiminami, Y.P. Ivanov, and A.L. Greer, Acta Mater 170, 50–61 (2019).10.1016/j.actamat.2019.03.019 ↗
6. A. Inoue, N. Nishiyama, and H. Kimura, Mater. Trans. JIM 38, 179 (1997).10.2320/matertrans1989.38.179 ↗
7. J. Schroers, B. Lohwongwatana, and W.L. Johnson, Appl. Phys. Lett. 87, 061912 (2005).10.1063/1.2008374 ↗
8. A. Inoue, T. Zhang, and T. Masumoto, Mater. Trans. JIM 31, 177 (1990).10.2320/matertrans1989.31.177 ↗
9. X. Gu, L. Xing, and T. Hufnagel, J. Non-Cryst. Solids 311, 77 (2002).10.1016/S0022-3093(02)01193-6 ↗
10. D. Zhang, Prog. Mater Sci. 49, 537 (2004).10.1016/S0079-6425(03)00034-3 ↗
11. Y.B. Kim, D.H. Jang, H.K. Seok, and K.Y. Kim, Mater. Sci. Eng. A 449, 389 (2007).10.1016/j.msea.2006.02.394 ↗
12. J. Guo, Y. Dong, Q. Man, Q. Li, C. Chang, and X.M. Wang, J. Magn. Magn. Mater. 401, 432 (2016).10.1016/j.jmmm.2015.10.069 ↗
13. B. Neamţu, H.F. Chicinaş, T.F. Marinca, and O. Isnard, Mater. Chem. Phys. 183, 83 (2016).10.1016/j.matchemphys.2016.08.005 ↗
14. B. Murty and S. Ranganathan, Int. Mater. Rev. 43, 101 (1998).10.1179/imr.1998.43.3.101 ↗
15. A. Hajalilou, M. Hashim, and R. Ebrahimi-Kahrizsangi, J. Alloys Compd. 633, 306 (2015).10.1016/j.jallcom.2015.02.061 ↗
16. R.A. Sekhar, S. Samal, N. Nayan, and S.R. Bakshi, J. Alloys Compd 787, 123 (2019).10.1016/j.jallcom.2019.02.083 ↗
17. C. Suryanarayana, Prog. Mater Sci. 46, 1 (2001).10.1016/S0079-6425(99)00010-9 ↗
18. C. Suryanarayana, Mechanical Alloying and Milling (New York: Marcel Dekker, 2004).10.1201/9780203020647 ↗
19. C. Suryanarayana and A. Inoue, Int. Mater. Rev. 58, 131 (2013).10.1179/1743280412Y.0000000007 ↗
20. Y. Lv, Q. Chen, and Y. Huang, J. Rare Earth 37, 4 (2019).
21. Z. Lu and C. Liu, J. Mater. Sci. 39, 3965 (2004).10.1023/B:JMSC.0000031478.73621.64 ↗
22. K.R. Zhu, W. Jiang, J.L. Wu, and B. Zhang, Int. J. Min. Met. Mater. Mater. 24, 8 (2017).
23. Z. Li, S. Zhou, G. Zhang, and W. Zheng, Materials 11, 7 (2018).
24. C.G. Jia, J. Pang, S.P. Pan, Y.J. Zhang, K.B. Kim, J.Y. Qin, and W.M. Wang, Corros. Sci. 147, 94 (2019).10.1016/j.corsci.2018.11.008 ↗
25. S. Sharma, R. Vaidyanathan, and C. Suryanarayana, Appl. Phys. Lett. 90, 111915 (2007).10.1063/1.2713867 ↗
26. R.G. Adli, A. Kianvash, M.G. Hosseini, A. Hajalilou, and E. Abouzari-Lotf, Ceram. Int. 44, 16 (2018).10.1016/j.ceramint.2018.07.279 ↗
27. R.G. Adli, A. Kianvash, M.G. Hosseini, A. Hajalilou, and E. Abouzari-Lotf, JOM 1, 2 (2019). https://doi.org/10.1007/s11837-03486-9.10.1007/s11837-03486-9 ↗
28. B. Neamţu, T.F. Marinca, I. Chicinaş, and O. Isnard, J. Alloys Compd. 600, 1 (2014).10.1016/j.jallcom.2014.02.115 ↗
29. R. Babilas, A. Radoń, and P. Gębara, Acta Phys. Pol. A. 131, 726 (2017).10.12693/APhysPolA.131.726 ↗
30. A. Taghvaei, F. Ghajari, and D. Markó, J. Magn. Magn. Mater. 395, 354 (2015).10.1016/j.jmmm.2015.07.073 ↗