Co-Precipitation Synthesis and Characterization of SrBi2Ta2O9 Ceramic
Source abstract
Abstract
Strontium bismuth tantalate (SrBi2Ta2O9) was synthesized by a co-precipitation method. The sample was characterized by x-ray powder diffraction patterns (XRD), Fourier-transform infrared spectroscopy (FTIR) and scanning electron microscopy (SEM). The results of the dielectric properties are reported at room temperature. No secondary phases were found while heating the powder at 850°C and the pure SrBi2Ta2O9 phase was formed, as revealed by XRD. The characteristic bands for SrBi2Ta2O9 were observed by FTIR at approximately 619 cm−1 and 810 cm−1. SEM micrographs for the sample displayed thin plate-like grains. The grain size was less than 1 μm and the crystallite size of about 24 nm. Dielectric response at room temperature shows that the SrBi2Ta2O9 ceramic has low loss values, and the flattening of the dielectric constant at higher frequencies. The observed Curie temperature is comparable with those reported in the literature.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Ferroelectric and Piezoelectric Materials · Microwave Dielectric Ceramics Synthesis · Acoustic Wave Resonator Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (24)
Show source-provided references
1. E.P. Kharitonova and V.I. Voronkova, Inorg. Mater. 43, 1340 (2007).10.1134/S0020168507120175 ↗
2. V.A. Isupov, Inorg. Mater. 42, 1094 (2006).10.1134/S0020168506100086 ↗
3. Q.-H. Li, M. Takahashi, T. Horiuchi, S. Wang, and S. Sakai, Semicond. Sci. Technol. 23, 45011 (2008).10.1088/0268-1242/23/4/045011 ↗
4. B. Li, L. Li, and X. Wang, Ceram. Int. 29, 351 (2003).10.1016/S0272-8842(02)00138-4 ↗
5. W. Wang, H. Ke, J. Rao, M. Feng, and Y. Zhou, J. Alloys Compd. 504, 367 (2010).10.1016/j.jallcom.2010.05.118 ↗
6. A.B. Panda, A. Tarafdar, A. Pathak, and P. Pramanik, Ceram. Int. 30, 715 (2004).10.1016/j.ceramint.2003.08.010 ↗
7. F.F. Oliveira, S. Da Dalt, V.C. Sousa, and C.P. Bergmann, Powder Technol. 225, 239 (2012).10.1016/j.powtec.2012.04.023 ↗
8. H. Wang, J. Liu, M. Zhu, B. Wang, and H. Yan, Mater. Lett. 57, 2371 (2003).10.1016/S0167-577X(02)01237-5 ↗
9. P. Nayak, T. Badapanda, and S. Panigrahi, J. Mater. Sci. Mater. Electron. 28, 625 (2017).10.1007/s10854-016-5567-1 ↗
10. I. Coondoo and A.K. Jha, Mater. Lett. 63, 48 (2009).10.1016/j.matlet.2008.08.050 ↗
11. V. Senthil, J. Mater. Sci. Mater. Electron. 27, 1602 (2016).10.1007/s10854-015-3930-2 ↗
12. I. Coondoo, A.K. Jha, and S.K. Agarwal, Ceram. Int. 33, 41 (2007).10.1016/j.ceramint.2005.07.013 ↗
13. H. Mändar, J. Felsche, V. Mikli, and T. Vajakas, J. Appl. Crystallogr. 32, 345 (1999).10.1107/S0021889898011170 ↗
14. S. Thankachan, B.P. Jacob, S. Xavier, and E.M. Mohammed, Phys. Scr. 87, 025701 (2013).10.1088/0031-8949/87/02/025701 ↗
15. B.R. Kannan and B.H. Venkataraman, J. Mater. Sci. Mater. Electron. 25, 4943 (2014).10.1007/s10854-014-2255-x ↗
16. D. Kajewski, Z. Ujma, K. Szot, and M. Pawełczyk, Ceram. Int. 35, 2351 (2009).10.1016/j.ceramint.2009.01.013 ↗
17. G.S. Murugan and K.B.R. Varma, J. Electroceramics 8, 37 (2002).10.1023/A:1015547202006 ↗
18. C.H. Lu and S.K. Saha, Mater. Res. Bull. 35, 2135 (2000).10.1016/S0025-5408(00)00422-0 ↗
19. V. Senthil, T. Badapanda, A. Chandrabose, and S. Panigrahi, Mater. Lett. 159, 138 (2015).10.1016/j.matlet.2015.06.093 ↗
20. M. Afqir, A. Tachafine, D. Fasquelle, M. Elaatmani, J.-C. Carru, A. Zegzouti, and M. Daoud, Open J. Phys. Chem. 6, 42 (2016).10.4236/ojpc.2016.62004 ↗
21. I. Coondoo, A.K. Jha, and S.K. Agarwal, J. Eur. Ceram. Soc. 27, 253 (2007).10.1016/j.jeurceramsoc.2006.04.167 ↗
22. S.U. Jan, A. Zeb, and S.J. Milne, J. Eur. Ceram. Soc. 36, 2713 (2016).10.1016/j.jeurceramsoc.2016.03.018 ↗
23. G. Liu, S. Zhang, W. Jiang, and W. Cao, Mater. Sci. Eng. R 89, 1 (2015).10.1016/j.mser.2015.01.002 ↗
24. E.P. Papadakis, J. Acoust. Soc. Am. 33, 1616 (1961).10.1121/1.1908517 ↗