journal article·2018-07

Electrosprayed Cerium Oxide Nanoparticles

Pedram Bagherzadeh Azar, Hossein Tavanai, Ali Reza Allafchian

Journal of Electronic Materials· Volume 47· Issue 7
Publisher page

Abstract

Cerium oxide nanoparticles were fabricated via the calcination of electrosprayed polyvinyl alcohol (PVA)/cerium nitrate nanoparticles. The effect of material variables of PVA/cerium nitrate electrospraying solution, i.e. viscosity, surface tension and electrical conductivity, as well as important process variables like voltage, nozzle–collector distance and feed rate on cerium oxide nanoparticle size, are investigated. Scanning electron microscopy and Fourier-transform infrared (FTIR) spectroscopy analysis have also been carried out. The results showed that electrospraying of PVA/cerium nitrate (25% w/v) was only possible with PVA concentrations in the range of 5–8% w/v. With other conditions constant, decreasing PVA concentration, decreasing feed rate, increasing nozzle–collector distance and increasing voltage decreased the size of the final cerium oxide nanoparticles. The gross average size of all cerium oxide nanoparticles obtained in this work was about 80 nm. FTIR analysis proved the formation of cerium oxide after the calcination process.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Electrohydrodynamics and Fluid Dynamics · Catalytic Processes in Materials Science · Biodiesel Production and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (36)

Show source-provided references
1. T.A. Ring, Fundamentals of Ceramic Powder Processing and Synthesis (Cambridge: Academic, 1996).
2. G. Bronitsky, Adv. Archaeol. Method Theory 9, 209 (1986).10.1016/B978-0-12-003109-2.50008-8 ↗
3. D. Uhlmann, H.K. Bowen, and W. Kingery, Introduction to Ceramics (New York: Wiley, 1976).
4. S. Somiya, Handbook of Advanced Ceramics (Amsterdam: Elsevier, 2003).
5. K.-S. Lew, R. Othman, K. Ishikawa, and F.-Y. Yeoh, J. Biomater. Appl. 27, 345 (2011).10.1177/0885328211406459 ↗
6. C.B. Carter and M.G. Norton, Ceramic Materials: Science and Engineering (New York: Springer, 2007).
7. L.L. Hench, R.J. Splinter, W. Allen, and T. Greenlee, J. Biomed. Mater. Res. 5, 117 (1971).10.1002/jbm.820050611 ↗
8. D.L. Chess, C.A. Chess, and W.B. White, Mater. Res. Bull. 19, 1551 (1984).10.1016/0025-5408(84)90230-7 ↗
9. L. Ayuk Eugene, O. Ugwu Mariagoretti, and B. Aronimo Samuel, Chem. Res. J. 2, 97 (2017).
10. K. Reinhardt and H. Winkler, Cerium Mischmetal, Cerium Alloys, and Cerium Compounds (Weinheim: Ullmann’s Encyclopedia of Industrial Chemistry, Wiley-VCH, 2002).
11. H. Meixner and U. Lampe, Sens. Actuators B 33, 198 (1996).10.1016/0925-4005(96)80098-0 ↗
12. P.T. Moseley, Sens. Actuators B 6, 149 (1992).10.1016/0925-4005(92)80047-2 ↗
13. G. Sberveglieri, Sens. Actuators B 23, 103 (1995).10.1016/0925-4005(94)01278-P ↗
14. R. Bene, I. Perczer, F. Reti, F. Meyer, M. Fleisher, and H. Meixner, Sens. Actuators B 71, 36 (2000).10.1016/S0925-4005(00)00592-X ↗
15. H.J. Beie and A. Gnorich, Sens. Actuators B 4, 393 (1991).10.1016/0925-4005(91)80141-6 ↗
16. T. Suzuki, I. Kosacki, H.U. Anderson, and P. Colomban, J. Am. Ceram. Soc. 84, 2007 (2001).10.1111/j.1151-2916.2001.tb00950.x ↗
17. P. Jasinski, T.S. Harlan, and U. Anderson, Sens. Actuators, B 95, 73 (2003).10.1016/S0925-4005(03)00407-6 ↗
18. A. Rayegan, A. Allafchian, I. Abdolhosseini, and P. Kameli, Int. J. Biol. Macromol. (2018). https://doi.org/10.1016/j.ijbiomac.2018.02.134 .10.1016/j.ijbiomac.2018.02.134 ↗
19. A.A. Ensafi, A.R. Allafchian, and B. Rezaei, Colloids Surf. B Biointerfaces 103, 468 (2013).10.1016/j.colsurfb.2012.11.021 ↗
20. L. Ding, N. Liu, L. Li, X. Wei, X. Zhang, J. Su, J. Rao, C. Yang, W. Li, and J. Wang, Adv. Mater. 27, 3579 (2015).10.1002/adma.201570157 ↗
21. Q. Mahmood, A. Afzal, H.M. Siddiqi, and A. Habib, J. Sol-Gel Sci. Tech. 67, 670 (2013).10.1007/s10971-013-3112-8 ↗
22. K. Anandan and V. Rajendran, J. Phys. Sci. 17, 179 (2013).
23. L. Yin, Y. Wang, G. Pang, Y. Koltypin, and A. Gedanken, J. Colloid Int. Sci. 246, 78 (2002).10.1006/jcis.2001.8047 ↗
24. T. Masui, H. Hirai, N. Imanaka, G. Adachi, T. Sakata, and H. Mori, J. Mater. Sci. Let. 21, 489 (2002).10.1023/A:1015342925372 ↗
25. H. Oh and S. Kim, J. Aerosol Sci. 38, 1185 (2007).10.1016/j.jaerosci.2007.09.007 ↗
26. D. Ni, W. Yi, Z. Cao, and W. Gu. Applied Optics and Photonics China (AOPC2015). International Society for Optics and Photonics, 967310 (2015).
27. A. Jaworek, Powder Tech. 176, 18 (2007).10.1016/j.powtec.2007.01.035 ↗
28. M. Valvo, U. Lafont, D. Munao, and E. Kelder, J. Power Sour. 189, 297 (2009).10.1016/j.jpowsour.2008.09.019 ↗
29. A. Gholami, H. Tavanai, and A. Moradi, J. Nanopart. Res. 13, 2089 (2011).10.1007/s11051-010-9965-7 ↗
30. N. Hazeri, H. Tavanai, and A.R. Moradi, Sci. Technol. Adv. Mater. 13, 035010 (2013).10.1088/1468-6996/13/3/035010 ↗
31. F. Ebrahimgol, H. Tavanai, F. Alihosseini, and T. Khayamian, Polymer. Adv. Tech. 25, 1001 (2014).10.1002/pat.3342 ↗
32. Z.P. Rad, H. Tavanai, and A. Moradi, J. Aerosol Sci. 51, 49 (2012).10.1016/j.jaerosci.2012.04.007 ↗
33. M. Ghaeb, H. Tavanai, and M. Kadivar, Polymer Adv. Tech. 26, 917 (2015).10.1002/pat.3501 ↗
34. A. Jaworek and A. Sobczyk, J. Electrostat. 66, 197 (2008).10.1016/j.elstat.2007.10.001 ↗
35. X. Yang, C. Shao, Y. Liu, R. Mu, and H. Guan, Thin Solid Films 478, 228 (2005).10.1016/j.tsf.2004.11.102 ↗
36. P. Periyat, F. Laffir, S.A.M. Tofail, and E. Magner, RSC Adv. 1, 1794 (2011).10.1039/c1ra00524c ↗