journal article·2018-05

Refinement of the β-Sn Grains in Ni-Doped Sn-3.0Ag-0.5Cu Solder Joints with Cu-Based and Ni-Based Substrates

Tzu-Ting Chou, Wei-Yu Chen, Collin Jordon Fleshman, Jenq-Gong Duh

Journal of Electronic Materials· Volume 47· Issue 5
Publisher page

Abstract

A fine-grain structure with random orientations of lead-free solder joints was successfully obtained in this study. The Sn-Ag-Cu solder alloys doped with minor Ni were reflowed with Ni-based or Cu-based substrates to fabricate the joints containing different Ni content. Adding 0.1 wt.% Ni into the solder effectively promoted the formation of fine Sn grains, and reflowing with Ni-based substrates further enhanced the effects of β-Sn grain refinement. The crystallographic characteristics and the microstructures were analyzed to identify the solidification mechanism of different types of microstructure in the joints. The phase precipitating order in the joint altered as the solder composition were modified by elemental doping and changing substrate, which significantly affected the efficiency of grain refinement and the final grain structure. The formation mechanism of fine β-Sn grains in the Ni-doped joint with a Ni-based substrate is attributable to the heterogeneous nucleation by Ni, whereas the Ni in the joint using ChouCu-based substrate is consumed to form an intermetallic compound and thus retard the effect of grain refining.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Electronic Packaging and Soldering Technologies · 3D IC and TSV technologies · Aluminum Alloy Microstructure Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (29)

Show source-provided references
1. J. Han, H. Chen, and M. Li, Acta Metall. Sin. (Engl. Lett.) 25, 214 (2012).
2. S. Jones, D. Barbé, R. Ellinger, E. Kural, and A.F. Parrilla, in ICV Conference Proceeddings (2016), pp. 1–5.
3. N. Bajad, H. Kulkarni, S. Dhole, S. Thakur, and S. Tonapi, in ITHERM Conference Proceedings (2014), pp. 1145–1153.
4. D. Barbini and M. Meilunas, in SMTA International Conference Proceedings (2011), pp. 292–300.
5. Y.W. Lin, J.H. Ke, H.Y. Chuang, Y.S. Lai, and C.R. Kao, J. Appl. Phys. 107, 073516 (2010).10.1063/1.3371711 ↗
6. L. Zhang, Z.G. Wang, and J.K. Shang, Scr. Mater. 56, 381 (2007).10.1016/j.scriptamat.2006.10.043 ↗
7. Z.H. Zhang, H.J. Cao, M.Y. Li, Y. Wang, and Z.Q. Liu, J. Appl. Phys. 116, 054909 (2014).10.1063/1.4892365 ↗
8. M. Lu, D.-Y. Shih, P. Lauro, C. Goldsmith, and D.W. Henderson, Appl. Phys. Lett. 92, 211909 (2008).10.1063/1.2936996 ↗
9. B.F. Dyson, T.R. Anthony, and D. Turnbull, J. Appl. Phys. 38, 3408 (1967).10.1063/1.1710127 ↗
10. B.F. Dyson, J. Appl. Phys. 37, 2375 (1966).10.1063/1.1708821 ↗
11. D.C. Yeh and H.B. Huntington, Phys. Rev. Lett. 53, 1469 (1984).10.1103/PhysRevLett.53.1469 ↗
12. B. Liu, Y. Tian, C. Wang, R. An, and C. Wang, Intermetallics 80, 26 (2017).10.1016/j.intermet.2016.10.004 ↗
13. Z. Kornain, A. Jalar, N. Amin, R. Rasid, and C. Foong, Am. J. Eng. Appl. Sci. 3, 83–89 (2010).10.3844/ajeassp.2010.83.89 ↗
14. H. Chen, J. Li, and M. Li, J. Alloys Compd. 540, 32 (2012).10.1016/j.jallcom.2012.06.087 ↗
15. Q. Zhou, B. Zhou, T.-K. Lee, and T. Bieler, J. Electron. Mater. 45, 3013 (2016).10.1007/s11664-016-4343-6 ↗
16. T.R. Bieler, J. Hairong, L.P. Lehman, T. Kirkpatrick, E.J. Cotts, and B. Nandagopal, IEEE Trans. Compon. Packag. Technol. 31, 370 (2008).10.1109/TCAPT.2008.916835 ↗
17. T.-K. Lee, T.R. Bieler, C.-U. Kim, and H. Ma, Fundamentals of Lead-Free Solder Interconnect Technology: From Microstructures to Reliability (New York: Springer, 2015), p. 81.10.1007/978-1-4614-9266-5_4 ↗
18. B. Zhou, T.R. Bieler, T.-K. Lee, and K.-C. Liu, J. Electron. Mater. 39, 2669 (2010).10.1007/s11664-010-1380-4 ↗
19. C.K. Chung, J.J. Yu, T.L. Yang, and C.R. Kao, in IMPACT Conference Proceedings (2013), pp. 124–127.
20. I.E. Anderson, Lead-Free Electronic Solders: A Special Issue of the Journal of Materials Science: Materials in Electronics (New York: Springer, 2007), p. 55.10.1007/978-0-387-48433-4_4 ↗
21. S.K. Kang, P. Gruber, and D.-Y. Shih, JOM 60, 66 (2008).10.1007/s11837-008-0075-2 ↗
22. C.-Y. Yu, T.-K. Lee, M. Tsai, K.-C. Liu, and J.-G. Duh, J. Electron. Mater. 39, 2544 (2010).10.1007/s11664-010-1372-4 ↗
23. S.J. Wang and C.Y. Liu, J. Electron. Mater. 35, 1955 (2006).10.1007/s11664-006-0299-2 ↗
24. S.J. Wang and C.Y. Liu, J. Electron. Mater. 32, 1303 (2003).10.1007/s11664-003-0027-0 ↗
25. K.-W. Moon, W.J. Boettinger, U.R. Kattner, F.S. Biancaniello, and C.A. Handwerker, J. Electron. Mater. 29, 1122 (2000).10.1007/s11664-000-0003-x ↗
26. J.W. Xian, Z.L. Ma, S.A. Belyakov, M. Ollivier, and C.M. Gourlay, Acta Mater. 123, 404 (2017).10.1016/j.actamat.2016.10.008 ↗
27. B. Arfaei, M. Benedict, and E.J. Cotts, J. Appl. Phys. 114, 173506 (2013).10.1063/1.4826437 ↗
28. R.M.R. Jere, H. Brophy, and J. Wulff, Structure and Properties of Materials, ed. J. Wulff (New York: Wiley, 1964), p. 104.
29. D. Turnbull and B. Vonnegut, Ind. Eng. Chem. 44, 1292 (1952).10.1021/ie50510a031 ↗