Effect of Fe2O3 and Binder on the Electrochemical Properties of Fe2O3/AB (Acetylene Black) Composite Electrodes
Source abstract
Abstract
In an effort to find the best anode material for Fe/air batteries, a Fe2O3/AB (Acetylene Black) composite was prepared by dry-type ball milling using Fe2O3 nanoparticles and AB as the active and additive materials, respectively. The effects of various binders and Fe2O3 content on the electrochemical properties of Fe2O3/AB electrodes in alkaline solution were investigated. It was found that the content of Fe2O3 strongly affected the electrochemical behavior of Fe2O3/AB electrodes; with Fe2O3 nanopowder content reaching 70 wt.% for the electrode and showing improvement of the cyclability. When the electrode binder polytetrafluoroethylene (PTFE) was used, clear redox peaks were observed via cyclic voltammetry (CV), while polyvinylidene fluoride-containing electrodes provided CV curves with unobservable redox peaks. Increasing either binder content in the electrode showed a negative effect in terms of the cyclability of the Fe2O3/AB electrode.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Conducting polymers and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (18)
Show source-provided references
1. L. Ojefors, Electrochem. Sci. Technol. 123, 1691 (1977).10.1149/1.2132669 ↗
2. R.S. Schrebler Guzmán, J.R. Vilche, and A.J. Arvía, Electrochim. Acta 24, 395 (1979).10.1016/0013-4686(79)87026-7 ↗
3. N. Jayalakshmi and V.S. Muralidharan, J. Power Sources 32, 277 (1990).10.1016/0378-7753(90)87021-I ↗
4. M. De Koninck, T. Brousse, and D. Bélanger, Electrochim. Acta 48, 1425 (2003).10.1016/S0013-4686(03)00020-3 ↗
5. M. Maja, C. Orecchia, M. Strano, P. Tosco, and M. Vanni, Electrochim. Acta 46, 423 (2000).10.1016/S0013-4686(00)00601-0 ↗
6. L. Ojefors and L. Carlsson, J. Power Sources 2, 287 (1977).10.1016/0378-7753(78)85019-8 ↗
7. K.F. Blurton and A.F. Sammells, J. Power Sources 4, 263 (1979).10.1016/0378-7753(79)80001-4 ↗
8. A.M. Kannan and A.K. Shukla, J. Power Sources 35, 113 (1991).10.1016/0378-7753(91)80028-V ↗
9. J. Cerny and K. Micka, J. Power Sources 25, 111 (1989).10.1016/0378-7753(89)85003-7 ↗
10. P. Periasamy, B. Ramesh Babu, and S. Venkatakrishna Iyer, J. Power Sources 58, 35 (1996).10.1016/0378-7753(95)02274-0 ↗
11. P. Periasamy, B. Ramesh Babu, and S. Venkatakrishna Iyer, J. Power Sources 63, 79 (1996).10.1016/S0378-7753(96)02449-4 ↗
12. T.S. Balasubramanian and A.K. Shukla, J. Power Sources 41, 99 (1993).10.1016/0378-7753(93)85008-C ↗
13. C.A. Caldas, M.C. Lopes, and I.A. Carlos, J. Power Sources 74, 108 (1998).10.1016/S0378-7753(98)00039-1 ↗
14. B.T. Hang, M. Eashira, I. Watanabe, S. Okada, J.I. Yamaki, S.H. Yoon, and I. Mochida, J. Power Sources 143, 256 (2005).10.1016/j.jpowsour.2004.11.044 ↗
15. B.T. Hang, T. Watanabe, M. Eashira, S. Okada, J.I. Yamaki, S. Hata, S.H. Yoon, and I. Mochida, J. Power Sources 150, 261 (2005).10.1016/j.jpowsour.2005.02.028 ↗
16. B.T. Hang, T. Watanabe, M. Eashira, I. Watanabe, S. Okada, and J. Yamaki, Electrochem. Solid-State Lett. 8, A476 (2005).10.1149/1.1999914 ↗
17. A.K. Shukla, M.K. Ravikumar, and T.S. Balasubramanian, J. Power Sources 51, 29 (1994).10.1016/0378-7753(94)01953-3 ↗
18. K. Vijayamohanan, T.S. Balasubramanian, and A.K. Shukla, J. Power Sources 34, 269 (1991).10.1016/0378-7753(91)80093-D ↗