journal article·2017-03

Microcantilever Fracture Testing of Intermetallic Cu3Sn in Lead-Free Solder Interconnects

Bastian Philippi, Kurt Matoy, Johannes Zechner, Christoph Kirchlechner, Gerhard Dehm

Journal of Electronic Materials· Volume 46· Issue 3
Publisher page

Abstract

Driven by legislation and the abolishment of harmful and hazardous lead-containing solders, lead-free replacement materials are in continuous development. Assessment of the mechanical properties of intermetallic phases such as Cu3Sn that evolve at the interface between solder and copper metalization is crucial to predict performance and meet the high reliability demands in typical application fields of microelectronics. While representative material parameters and fracture properties are required to assess mechanical behavior, indentation-based testing produces different results depending on the sample type. In this work, focused ion beam machined cantilevers were used to unravel the impact of microstructure on the fracture behavior of Sn-Ag-Cu lead-free solder joints. Fracture testing on notched cantilevers showed brittle fracture for Cu3Sn. Unnotched samples allowed measurement of the fracture stress, to estimate the critical defect size in unnotched Cu3Sn microcantilevers.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Electronic Packaging and Soldering Technologies · Integrated Circuits and Semiconductor Failure Analysis · 3D IC and TSV technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (34)

Show source-provided references
1. J. Glazer, Int. Mater. Rev. 40, 65 (1995).10.1179/imr.1995.40.2.65 ↗
2. D.R. Frear, J.W. Jang, J.K. Lin, and C. Zhang, JOM 53, 28 (2001).10.1007/s11837-001-0099-3 ↗
3. C.M.L. Wu and M.L. Huang, J. Electron. Mater. 31, 442 (2002).10.1007/s11664-002-0098-3 ↗
4. M. Abtew and G. Selvaduray, Mater. Sci. Eng. R Rep. 27, 95 (2000).10.1016/S0927-796X(00)00010-3 ↗
5. K. Suganuma, Curr. Opin. Solid State Mater. Sci. 5, 55 (2001).10.1016/S1359-0286(00)00036-X ↗
6. M. Amagai, M. Watanabe, M. Omiya, K. Kishimoto, and T. Shibuya, Microelectron. Reliab. 42, 951 (2002).10.1016/S0026-2714(02)00017-3 ↗
7. K.S. Kim, S.H. Huh, and K. Suganuma, J. Alloys Compd. 352, 226 (2003).10.1016/S0925-8388(02)01166-0 ↗
8. P. Zimprich, A. Betzwar-Kotas, G. Khatibi, B. Weiss, and H. Ipser, J. Mater. Sci. Mater. Electron. 19, 383 (2008).10.1007/s10854-007-9349-7 ↗
9. L. Jiang, H. Jiang, and N. Chawla, J. Electron. Mater. 41, 2083 (2012).10.1007/s11664-012-2124-4 ↗
10. P. Borgesen, L. Yin, and P. Kondos, Microelectron. Reliab. 51, 837 (2011).10.1016/j.microrel.2010.11.014 ↗
11. T.C. Liu, C.M. Liu, Y.S. Huang, C. Chen, and K.N. Tu, Scr. Mater. 68, 241 (2013).10.1016/j.scriptamat.2012.10.024 ↗
12. W. Peng, E. Monlevade, and M.E. Marques, Microelectron. Reliab. 47, 2161 (2007).10.1016/j.microrel.2006.12.006 ↗
13. D.R. Frear and P.T. Vianco, Metall. Mater. Trans. A 25, 1509 (1994).10.1007/BF02665483 ↗
14. T. Laurila, V. Vuorinen, and J.K. Kivilahti, Mater. Sci. Eng. R Rep. 49, 1 (2005).10.1016/j.mser.2005.03.001 ↗
15. N. Zhang, Y. Shi, Z. Xia, Y. Lei, F. Guo, and X. Li, J. Electron. Mater. 37, 1631 (2008).10.1007/s11664-008-0506-4 ↗
16. S.M. Hayes, N. Chawla, and D.R. Frear, Microelectron. Reliab. 49, 269 (2009).10.1016/j.microrel.2008.11.004 ↗
17. S. Wiese, M. Roellig, M. Mueller, S. Bennemann, M. Petzold, and K. Wolter, in Electronic Components Technology Conference (2007), pp. 548–557.
18. M. Kerr and N. Chawla, JOM 56, 50 (2004).10.1007/s11837-004-0112-8 ↗
19. G. Ghosh, J. Mater. Res. 19, 1439 (2004).10.1557/JMR.2004.0193 ↗
20. J.S. Kang, R.A. Gagliano, G. Ghosh, and M.E. Fine, J. Electron. Mater. 31, 1238 (2002).10.1007/s11664-002-0015-9 ↗
21. L. Jiang and N. Chawla, Scr. Mater. 63, 480 (2010).10.1016/j.scriptamat.2010.05.009 ↗
22. L. Liu, Z. Chen, C. Liu, Y. Wu, and B. An, Intermetallics 76, 10 (2016).10.1016/j.intermet.2016.06.004 ↗
23. K. Matoy, H. Schönherr, T. Detzel, and G. Dehm, Thin Solid Films 518, 5796 (2010).10.1016/j.tsf.2010.05.114 ↗
24. D. Di Maio and S.G. Roberts, J. Mater. Res. 20, 299 (2005).10.1557/JMR.2005.0048 ↗
25. D.E.J. Armstrong, M.E. Rogers, and S.G. Roberts, Scr. Mater. 61, 741 (2009).10.1016/j.scriptamat.2009.06.017 ↗
26. S. Wurster, C. Motz, and R. Pippan, Philos. Mag. 92, 1803 (2012).10.1080/14786435.2012.658449 ↗
27. J. Schaufler, C. Schmid, K. Durst, and M. Göken, Thin Solid Films 522, 480 (2012).10.1016/j.tsf.2012.08.031 ↗
28. B. N. Jaya, C. Kirchlechner, and G. Dehm, J. Mater. Res. 1, 686 (2015).10.1557/jmr.2015.2 ↗
29. B. Philippi, K. Matoy, J. Zechner, C. Kirchlechner, and G. Dehm, Scr. Mater. 123, 38 (2016).10.1016/j.scriptamat.2016.05.039 ↗
30. K. Nogita, C.M. Gourlay, and T. Nishimura, JOM 61, 45 (2009).10.1007/s11837-009-0087-6 ↗
31. J.P. Best, J. Zechner, I. Shorubalko, J.V. Oboňa, J. Wehrs, M. Morstein, and J. Michler, Scr. Mater. 112, 71 (2016).10.1016/j.scriptamat.2015.09.014 ↗
32. K. Matoy, H. Schönherr, T. Detzel, T. Schöberl, R. Pippan, C. Motz, and G. Dehm, Thin Solid Films 518, 247 (2009).10.1016/j.tsf.2009.07.143 ↗
33. R.J. Fields and S.R. Low III, in Metal Science of Joining, Proceedings of TMS Symposium (1991).
34. B. Balakrisnan, C.C. Chum, M. Li, Z. Chen, and T. Cahyadi, J. Electron. Mater. 32, 166 (2003).10.1007/s11664-003-0188-x ↗