journal article·2012-06

Thermoelectric Properties of Melt-Spun Zn x Sb3 Ribbons

M. Hasaka, T. Morimura, H. Nakashima

Journal of Electronic Materials· Volume 41· Issue 6
Publisher page

Abstract

Melt-spun ribbons composed of ZnxSb3 (3.4 ≤ x ≤ 4.3) were fabricated through a single-wheel melt-spinning process at wheel velocities of 0.6 m s−1 to 4.2 m s−1 and annealed for 2 h at 673 K. The structures were investigated using x-ray diffraction. The dimensionless figure of merit ZT, Seebeck coefficient, and electrical conductivity were measured to estimate the power factor and thermal conductivity. β-Zn4Sb3 in the as-spun ribbons coexisted with ZnSb or Zn at 0.6 m s−1, while it coexisted with ζ-Zn3Sb2 in x ≥ 3.8 at 4.2 m s−1, where ζ-Zn3Sb2 disappeared in the annealed ribbons. The Seebeck coefficient in the as-spun and annealed ribbons tended to decrease slightly with increasing x at all the wheel velocities. At 0.6 m s−1, the ZT and power factor of as-spun and annealed ribbons increased with increasing x at x < 4.0 because of increase in the electrical conductivity. At 4.2 m s−1, ZT was smaller than that at 0.6 m s−1 because the electrical conductivity was small in the as-spun ribbons and the thermal conductivity was large in the annealed ribbons.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Thermoelectric Materials and Devices · Thermal Radiation and Cooling Technologies · Thermal properties of materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (22)

Show source-provided references
1. T. Caillat, J.-P. Fleurial, and A. Borshchevsky, Proc. 15th ICT’96, Pasadena (USA) (1996), p. 151.
2. T. Caillat, J.-P. Fleurial, and A. Borshchevsky, J. Phys. Chem. Solids 58, 1119 (1997).10.1016/S0022-3697(96)00228-4 ↗
3. L.T. Zhang, M. Tsutsui, K. Ito, and M. Yamaguchi, Thin Solid Films 443, 84 (2003).10.1016/S0040-6090(03)00855-1 ↗
4. K. Ueno, A. Yamamoto, T. Noguchi, T. Inoue, S. Sodeoka, H. Takazawa, C.H. Lee, and H. Obara, J. Alloys Compd. 384, 254 (2004).10.1016/j.jallcom.2004.03.134 ↗
5. G. Nakamoto, N. Akai, and M. Kurisu, J. Alloys Compd. 437, 151 (2007).10.1016/j.jallcom.2006.07.107 ↗
6. D. Cadavid and J.E. Rodrìguez, Phys. B 403, 3976 (2008).10.1016/j.physb.2008.07.039 ↗
7. M. Chitrou, F. Besse, and H. Scherrer, J. Alloys Compd. 460, 90 (2008).10.1016/j.jallcom.2007.06.051 ↗
8. C. Okamura, T. Ueda, and K. Hasezaki, J. Electron. Mater. 39, 2172 (2010).10.1007/s11664-009-0979-9 ↗
9. D. Qi, Y. Yan, H. Li, and X. Tang, J. Inorg. Mater. 25, 603 (2010).10.3724/SP.J.1077.2010.00603 ↗
10. D. Qi, X. Tang, H. Li, Y. Yan, and Q. Zhang, J. Electron. Mater. 39, 1159 (2010).10.1007/s11664-010-1288-z ↗
11. J.H. Ahn, M.W. Oh, B.S. Kim, S.D. Park, B.K. Min, H.W. Lee, and Y.J. Shim, Mater. Res. Bull. 46, 1490 (2011).10.1016/j.materresbull.2011.04.024 ↗
12. J.B. Li, M.C. Record, and J.C. Tedenac, J. Alloys Compd. 438, 171 (2007).10.1016/j.jallcom.2006.08.035 ↗
13. E.S. Toberer, P. Rauwel, S. Gariel, J. Taftø, and G.J. Snyder, J. Mater. Chem. 20, 9877 (2010).10.1039/c0jm02011g ↗
14. P. Rauwel, O.M. Løvvik, E. Rauwel, E.S. Toberer, G.J. Snyder, and J. Taftø, Phys. Status Solidi A 208, 1652 (2011).10.1002/pssa.201026613 ↗
15. L.T. Zhang, M. Tsutsui, K. Ito, and M. Yamaguchi, J. Alloys Compd. 358, 252 (2003).10.1016/S0925-8388(03)00074-4 ↗
16. B. Gault, E.A. Marquis, D.W. Saxey, G.M. Hughes, D. Mangelinck, E.S. Toberer, and G.J. Snyder, Scripta Mater. 63, 784 (2010).10.1016/j.scriptamat.2010.06.014 ↗
17. G.S. Pomrehn, E.S. Toberer, G.J. Snyder, and A. Walle, Phys. Rev. B 83, 094106 (2011).10.1103/PhysRevB.83.094106 ↗
18. G.J. Snyder, M. Christensen, E. Nishibori, T. Caillat, and B.B. Iversen, Nat. Mater. 3, 458 (2004).10.1038/nmat1154 ↗
19. G.J. Snyder, P.W. Stephens, and S.M. Haile, Proc. 24th ICT’05, Clemson (USA) (2005), p. 312.
20. K.E. Almin, Acta Chem. Scand. 2, 400 (1948).10.3891/acta.chem.scand.02-0400 ↗
21. M. Bostroem and S. Lidin, J. Alloys Compd. 376, 49 (2004).10.1016/j.jallcom.2003.12.017 ↗
22. T.C. Harman, J. Appl. Phys. 29, 1373 (1958).10.1063/1.1723445 ↗