Characterization of LiF/CuO-Codoped BaTiO3 for Embedded Capacitors
Source abstract
Abstract
Sintering additives for BaTiO3 were studied in order to facilitate the use of BaTiO3 as a material for embedded decoupling capacitors in high-density multilayered low-temperature cofired ceramic (LTCC) modules for mobile communication systems and three-dimensional (3D) printing modules. Among the studied additives, the CuO/LiF mixture was the most promising sintering additive for cofiring BaTiO3 with a commercial low-permittivity (er) LTCC sheet (MLS-22, NEG Co.). The temperature dependence of the dielectric properties of BaTiO3 was successfully controlled by adjusting the CuO/LiF amount and ratio and the sintering temperature. BaTiO3 codoped with 10 wt.% LiF/CuO (1:1 ratio) and sintered at 860°C for 30 min showed 95% sintering density. The room-temperature permittivity (er) of LiF/CuO-codoped BaTiO3 was 1620 at 1 MHz, and the temperature coefficient of capacitance satisfied the X5R specification. After cofiring this LiF/CuO-codoped BaTiO3 ceramic with an MLS-22 sheet at 860°C, there was no crack formation at the layer boundary. Also a chemical compatibility test revealed that there were no severe reactions between the LiF/CuO-codoped BaTiO3 and an Ag electrode.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microwave Dielectric Ceramics Synthesis · Ferroelectric and Piezoelectric Materials · Dielectric materials and actuators
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (16)
Show source-provided references
1. O. Dernovsek, A. Naeni, G. Preu, W. Wersing, M. Eberstein, and W.A. Schiller, J. Eur. Ceram. Soc. 21, 1693 (2001).10.1016/S0955-2219(01)00096-6 ↗
2. D.W. Kim, K.S. Hong, C.S. Yoon, and C.K. Kim, J. Eur. Ceram. Soc. 23, 2597 (2003).10.1016/S0955-2219(03)00154-7 ↗
3. M. Valant and D. Suvorov, Mater. Chem. Phys. 79, 104 (2003).10.1016/S0254-0584(02)00248-1 ↗
4. E. Wainer and A.N. Solomon, Titanium Alloy Manufacturing Co. Report No. 8 (September 1942) and No. 9 (January 1943).
5. C.A. Randall, S.F. Wang, D. Laubscher, J.P. Dougherty, and W. Huebner, J. Mater. Res. 8, 871 (1993).10.1557/JMR.1993.0871 ↗
6. W.G. Yang, B.P. Zhang, N. Ma, and L. Zhao, J. Eur. Ceram. Soc. 32, 899 (2012).10.1016/j.jeurceramsoc.2011.10.054 ↗
7. H. Naghib-zadeh, C. Glitzky, W. Oesterle, and T. Rabe, J.␣Eur. Ceram. Soc. 31, 589 (2011).10.1016/j.jeurceramsoc.2010.10.003 ↗
8. H. Naghib-zadeh, C. Glitzky, I. Dörfel, and T. Rabe, J. Eur. Ceram. Soc. 30, 81 (2010).10.1016/j.jeurceramsoc.2009.07.005 ↗
9. H.I. Hsiang, C.S. His, C.C. Huang, and S.L. Fu, Mater. Chem. Phys. 113, 658 (2009).10.1016/j.matchemphys.2008.08.033 ↗
10. M. Du, Y. Li, Y. Yuan, S. Zhang, and B. Tang, J. Electron. Mater. 36, 138 (2007).
11. Y.J. Choi, J.H. Park, J.H. Park, S. Nahm, and J.G. Park, J.␣Eur. Ceram. Soc. 27, 2017 (2007).10.1016/j.jeurceramsoc.2006.05.104 ↗
12. J. Takahashi, H. Nakano, and K. Kageyama, J. Eur. Ceram. Soc. 26, 2123 (2006).10.1016/j.jeurceramsoc.2005.09.070 ↗
13. K.H. Choi, J.H. Hwang, and Y.H. Han, J. Korean Ceram. Soc. 35, 864 (1998).
14. S. Wang, T. Yang, Y. Wang, and Y. Kuromitsu, Ceram. Int. 27, 157 (2001).10.1016/S0272-8842(00)00055-9 ↗
15. B.S. Rawal, M. Khan, and W.R. Buessem, Adv. Ceram. 1, 172 (1981).
16. S.K. Chiang, W.E. Lee, and D.W. Ready, Ceram. Bull. 66, 1230 (1987).