Development of a Peltier Current Lead for the 200-m-Class Superconducting Direct Current Transmission and Distribution System
Source abstract
Abstract
Reducing cryogenic heat leaks is critical for superconducting applications. Reduction of heat leak at the terminals is essential for uses with short-length applications, where cryogenic losses at the terminals dominate. We are developing a 200-m-class superconducting direct current (DC) transmission and distribution system (CASER-2), and have used a Peltier current lead (PCL) for heat insulation at the terminals. The PCL consists of thermoelectric elements and copper leads, which enhance the performance of superconducting systems. As DC flows through the current lead, thermoelectric elements on opposite terminations of a superconducting line can be used to decrease the heat ingress to the cryogenic environment (n-type on one end, p-type on the opposite end). During the current feeding and cooling test, a large temperature difference was observed across thermoelectric elements in the PCL. This demonstrates that we have successfully insulated the heat leak at the current lead. During the fourth cooling test, we established a new PCL design with p-type elements at terminal B, and then compared the performance of the terminals. Several improvements were implemented, including balancing the resistances of the PCL to enhance the stability of the superconducting systems.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Superconducting Materials and Applications · Superconductivity in MgB2 and Alloys · Physics of Superconductivity and Magnetism
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (24)
Show source-provided references
1. S. Mukoyama, M. Yagi, M. Ichikawa, S. Torii, T. Takahashi, H. Suzuki, and K. Yasuda, IEEE Trans. Appl. Supercond. 17, 1680 (2007).10.1109/TASC.2007.898112 ↗
2. T. Masuda, H. Yumura, M. Watanabe, H. Takigawa, Y. Ashibe, C. Suzawa, H. Ito, M. Hirose, K. Sato, S. Isojima, C. Weber, R. Lee, and J. Moscovic, IEEE Trans. Appl. Supercond. 17, 1648 (2007).10.1109/TASC.2007.898122 ↗
3. J.Y. Yoon, S.R. Lee, and J.Y. Kim, IEEE Trans. Appl. Supercond. 17, 1656 (2007).10.1109/TASC.2007.898386 ↗
4. H.X. Xi, W.Z. Gong, Y. Zang, Y.F. Bi, H.K. Ding, H. Wen, B. Hou, and Y. Xin, Physica C 448, 1054 (2006).
5. A. Geschiere, D. Willen, E. Piga, and P. Barendregt, J. Phys. Conf. Ser. 97, 012183 (2008).10.1088/1742-6596/97/1/012183 ↗
6. S. Honjo, T. Mimura, Y. Kitoh, Y. Noguchi, T. Masuda, H. Yumura, M. Watanabe, M. Ikeuchi, and H. Yaguchi, IEEE/CSC & ESAS European Superconductivity News Forum (ESNF). 14, ST198 (2010).
7. S. Yamaguchi, M. Hamabe, I. Yamamoto, T. Famakinwa, A. Sasaki, A. Iiyoshi, J. Shultz, J. Minervini, T. Hoshino, Y. Ishiguro, and K. Kawamura, J. Phys. Conf. Ser. 97, 012290 (2008).10.1088/1742-6596/97/1/012290 ↗
8. M. Hamabe, Y. Nasu, A. Ninomiya, Y. Ishiguro, S. Kusaka, and S. Yamaguchi, Adv. Cryog. Eng. 53A, 168 (2008).10.1063/1.2908538 ↗
9. M. Hamabe, T. Fujii, I. Yamamoto, A. Sasaki, Y. Nasu, S. Yamaguchi, A. Ninomiya, T. Hoshino, Y. Ishiguro, and K. Kawamura, IEEE Trans. Appl. Supercond. 19, 1778 (2009).10.1109/TASC.2009.2018241 ↗
10. S. Yamaguchi, T. Yamaguchi, K. Nakamura, Y. Hasegawa, H. Okumura, and K. Sato, Rev. Sci. Instrum. 75, 207 (2004).10.1063/1.1633987 ↗
11. Y. Hasegawa, K. Sato, H. Okumura, K. Nakamura, S. Yamaguchi, and K. Miyake, Cryogenics 42, 495 (2002).10.1016/S0011-2275(02)00048-6 ↗
12. T. Kawahara, T. Fujii, M. Emoto, M. Hamabe, J. Sun, H. Watanabe, and S. Yamaguchi, Physica C 470, S1011 (2010).10.1016/j.physc.2010.01.054 ↗
13. X.C. Xuan, K.C. Ng, C. Yap, and H.T. Chua, Cryogenics 42, 779 (2002).10.1016/S0011-2275(02)00146-7 ↗
14. S. Yamaguchi, T. Kawahara, M. Hamabe, H. Watanabe, Y. Ivanov, J. Sun, and A. Iiyoshi, Physica C 471, 1300 (2011).10.1016/j.physc.2011.05.182 ↗
15. T. Kawahara, M. Emoto, M. Hamabe, H. Watanabe, Y. Ivanov, J. Sun, and S. Yamaguchi, J. Electron. Mater. 41, 1205 (2012).10.1007/s11664-011-1877-5 ↗
16. T. Yamaguchi, H. Okumura, K. Nakamura, and S. Yamaguchi, IEEE Trans. Appl. Supercond. 13, 1910 (2003).10.1109/TASC.2003.812944 ↗
17. T. Yamaguchi, H. Okumura, K. Nakamura, and S. Yamaguchi, IEEE Trans. Appl. Supercond. 13, 1914 (2003).10.1109/TASC.2003.812945 ↗
18. H. Sugane, Y. Hikichi, M. Minowa, T. Kawahara, H. Watanabe, M. Hamabe, and S. Yamaguchi, Phys. Procedia 27, 384 (2012).10.1016/j.phpro.2012.03.491 ↗
19. M.N. Wilson, Superconducting Magnets (New York: Oxford University Press, 1983), p. 256.
20. H. Okumura and S. Yamaguchi, IEEE Trans. Appl. Supercond. 7, 715 (1997).10.1109/77.614604 ↗
21. K. Sato, H. Okumura, and S. Yamaguchi, Cryogenics 41, 497 (2001).10.1016/S0011-2275(01)00117-5 ↗
22. T. Yamaguchi, S. Mizutani, M. Moriguchi, H. Okumura, K. Nakamura, and S. Yamaguchi, IEEE Trans. Appl. Supercond. 14, 1719 (2004).10.1109/TASC.2004.831052 ↗
23. T. Fujii, S. Fukuda, M. Emoto, K. Osada, T. Kawahara, M. Hamabe, H. Watanabe, Y. Ivanov, J. Sun, and S. Yamaguchi, J. Electron. Mater. 40, 691 (2011).10.1007/s11664-011-1513-4 ↗
24. T. Kawahara, T. Fujii, M. Emoto, M. Hamabe, H. Watanabe, J. Sun, and S. Yamaguchi, IEEE Trans. Appl. Supercond. 21, 1070 (2011).10.1109/TASC.2010.2096451 ↗