journal article·2013-12

Effect of Poly(4-vinylphenol) Concentration Increase on Deposition Rate of Dielectric Thin Film Fabrication by Using Electrohydrodynamic Atomization

Adnan Ali, Yun Woo Lee, Kyung Hyun Choi, Jeongdai Jo

Journal of Electronic Materials· Volume 42· Issue 12
Publisher page

Abstract

In this work, the effect of poly(4-vinylphenol) (PVP) concentration increase on electrohydrodynamic atomization and its deposition rate has been studied. The aim of this study is to further increase the deposition rate of uniform dielectric thin films by the nonvacuum electrohydrodynamic atomization process. The operating envelope has been explored by subjecting ink to controlled flow through a metallic capillary exposed to an electric field at ambient temperature. It has been observed that greater applied voltage is required to develop a stable cone jet from a highly concentrated PVP meniscus, in comparison with lower concentration. A combination of optimized parameters has been used from the developed operating envelope to generate an electrohydrodynamic jet, which subsequently disintegrated into droplets, thus depositing a uniform PVP thin film on indium tin oxide-coated polyethylene terephthalate substrates with average thickness of ~40 nm at constant substrate speed of 3 mm/s. The PVP thin film has been characterized by using scanning electron microscopy, x-ray photoelectron spectroscopy, and ultraviolet (UV)–visible spectroscopy.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Electrohydrodynamics and Fluid Dynamics · Fluid Dynamics and Heat Transfer · Electrowetting and Microfluidic Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (31)

Show source-provided references
1. M. Mizukami, N. Hirohata, T. Iseki, K. Ohtawara, T. Tada, S. Yagyu, T. Abe, T. Suzuki, Y. Fujisake, Y. Inoue, S. Tokito, and T. Kurita, IEEE Electron Device Lett. 27, 249 (2006).10.1109/LED.2006.870413 ↗
2. G. Gu and M.G. Kane, Appl. Phys. Lett. 92, 053305 (2008).10.1063/1.2841918 ↗
3. S. Lee, B. Koo, J. Shin, E. Lee, H. Park, and H. Kim, Appl. Phys. Lett. 88, 162109 (2006).10.1063/1.2196475 ↗
4. L. Jiang, J. Zhang, D. Gamota, and C.G. Takoudis, Org. Electron. 11, 959 (2010).10.1016/j.orgel.2010.02.010 ↗
5. G.T. Carlson and B.L. Illman, Am. J. Phys. 70, 1122 (2002).10.1119/1.1506170 ↗
6. T.H. Kim, C.G. Han, and C.K. Song, Thin Solid Films 516, 1232 (2008).10.1016/j.tsf.2007.06.008 ↗
7. Y. Choi, H. Kim, K. Sim, K.C. Park, C. Im, and S. Pyo, Org. Electron. 10, 1209 (2009).
8. M.S. Oh, K. Lee, K.H. Lee, S.H. Cha, J.M. Choi, B.H. Lee, M.M. Sung, and S. Im, Adv. Funct. Mater. 19, 726 (2009).10.1002/adfm.200801155 ↗
9. D.K. Hwang, K. Lee, J.H. Kim, S. Im, J.H. Park, E. Kim, C.S. Kim, and H.K. Baik, Electrochem. Solid-State Lett. 10, H117 (2007).10.1149/1.2432939 ↗
10. J. Zeleny, Phys. Rev. 3, 69 (1914).10.1103/PhysRev.3.69 ↗
11. G.I. Taylor, Proc. R. Soc. Lond. 313, 453 (1969).
12. M. Cloupeau and B. Prunet-Foch, J. Electrostat. 25, 165 (1990).10.1016/0304-3886(90)90025-Q ↗
13. K. Rahman, A. Khan, N.M. Nam, K.-H. Choi, and D.S. Kim, Int. J. Precis. Eng. Manuf. 12, 663 (2011).10.1007/s12541-011-0086-8 ↗
14. A. Jaworek and A. Krupa, J. Aerosol Sci. 30, 873 (1999).10.1016/S0021-8502(98)00787-3 ↗
15. S.R. Samarasinghe, I. Pastoriza-Santos, M.J. Edirisinghe, and L.M. Liz-Marzan, Appl. Phys. A 91, 141 (2008).10.1007/s00339-007-4387-9 ↗
16. N.M. Muhammad, S. Sundharam, H.W. Dang, A. Lee, B.H. Ryu, and K.H. Choi, Curr. Appl. Phys. 11, S68 (2011).10.1016/j.cap.2010.11.059 ↗
17. C.H. Chen and J. Schoonman, J. Ind. Eng. Chem. 10, 1114 (2004).
18. A. Jaworek, A. Krupa, A.T. Sobczyk, M. Lackowski, T. Czech, S. Ramakrishna, S. Sundarrajan, and D. Pliszka, Solid State Phenom. 140, 127 (2008).10.4028/www.scientific.net/SSP.140.127 ↗
19. K.H. Choi, A. Adnan, H.C. Kim, Y.H. Doh, and M.T. Hyun, J. Korean Phys. Soc. 62, 269 (2013).
20. I.B. Rietveld, K. Kobayashi, H. Yamada, and K. Matsushige, J. Colloid Interface Sci. 2, 639 (2006).10.1016/j.jcis.2005.12.028 ↗
21. C.H. Park and J.H. Lee, J. Appl. Polym. Sci. 1, 430 (2009).10.1002/app.30498 ↗
22. A. Khan, K. Rahman, M.T. Hyun, D.S. Kim, and K.H. Choi, Appl. Phys. A 104, 1113 (2011).10.1007/s00339-011-6386-0 ↗
23. N.M. Muhammad, A.M. Naeem, N. Duraisamy, D.S. Kim, and K.H. Choi, Thin Solid Films 520, 1751 (2012).10.1016/j.tsf.2011.08.065 ↗
24. K.H. Choi, M. Mustafa, K. Rahman, B.K. Jeong, and Y.H. Doh, Appl. Phys. A 106, 165 (2012).10.1007/s00339-011-6670-z ↗
25. A. Khan, K. Rahman, D.S. Kim, and K.H. Choi, J. Mater. Process. Technol. 212, 700 (2011).10.1016/j.jmatprotec.2011.10.024 ↗
26. K. Rahman, J.B. Ko, S. Khan, D.S. Kim, and K.H. Choi, J. Mech. Sci. Technol. 24, 307 (2010).10.1007/s12206-009-1149-y ↗
27. K.H. Choi, A. Ali, A. Rahman, N. Malik Mohammad, K. Rahman, A. Khan, S. Khan, and D. Kim, J. Micromech. Microeng. 20, 075033 (2010).10.1088/0960-1317/20/7/075033 ↗
28. K. Rahman, A. Khan, N.M. Nam, K.H. Choi, and D.S. Kim, Int. J. Precis. Eng. Manuf. 4, 663 (2011).10.1007/s12541-011-0086-8 ↗
29. R. Hartman, D. Brunner, D. Camelot, J. Marijnissen, and B. Scarlett, J. Aerosol Sci. 1, 65 (2000).10.1016/S0021-8502(99)00034-8 ↗
30. I. Hayati, A. Bailey, and T.F. Tadros, Nature 319, 41 (1986).10.1038/319041a0 ↗
31. A.M. Ganan-Calvo, J. Davila, and A. Barrero, J. Aerosol Sci. 28, 249 (1997).10.1016/S0021-8502(96)00433-8 ↗