journal article·2014-02

Frequency-Dependent Low Cycle Fatigue of Sn1Ag0.1Cu(In/Ni) Solder Joints Subjected to High-Frequency Loading

E. H. Wong, S. K. W. Seah, V. P. W. Shim

Journal of Electronic Materials· Volume 43· Issue 2
Publisher page

Abstract

The low-cycle-fatigue characteristics of solder joints, formed by reflowing Sn98.8/Ag1.0/Cu0.1/In0.05/Ni0.02 solder over electroless nickel immersion gold-plated copper pads, were investigated by dynamic cyclic bending of printed circuit boards (PCBs). The PCB strain amplitudes were varied from 1.2 × 10−3 to 2.4 × 10−3 and the flexural frequencies ranged from 30 Hz to 150 Hz, to simulate drop impact-induced PCB resonant frequencies. A trend of drastically decreasing fatigue life with cyclic frequency was observed, in contrast with previous reports indicating the reverse; this is attributed to the different failure mechanisms activated. A systematic procedure involving optimization followed by transformation was used to condense the strain–frequency–life data into a master curve expressed in strain–life space.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Electronic Packaging and Soldering Technologies · Mechanical Behavior of Composites · Electrostatic Discharge in Electronics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (24)

Show source-provided references
1. K. Mishiro, S. Ishikawa, M. Abe, T. Kumai, Y. Higashiguchi, and K. Tsubone, Microelectron. Reliab. 42, 77 (2002).10.1016/S0026-2714(01)00230-X ↗
2. JEDEC Standard JESD22-B111, Board Level Drop Test Method of Components for Handheld Electronic Products, (2003).
3. C.T. Lim, Y.M. Teo, and V.P.W. Shim, IEEE Trans. Compon. Packag. Technol. 25, 478 (2002).10.1109/TCAPT.2002.803652 ↗
4. S.K.W. Seah, C.T. Lim, E.H. Wong, V.B.C Tan, and V.P.W. Shim, Proceedings of the 4th Electronic Components and Technology Conference (2002, Singapore), pp. 120–125.
5. E.H. Wong and C.K. Wong, IEEE Trans. Compon. Packag. Technol. 31, 790–800 (2008).10.1109/TCAPT.2008.2001196 ↗
6. K. Nakado, A. Yaguchi, T. Terasaki, and K. Yamamoto, JSME Ser. A 49, 220 (2006).10.1299/jsmea.49.220 ↗
7. C.-L. Yeh, Y.-S. Lai, H.-C. Chang, and T.-H. Chen, Microelectron. Reliab. 47, 1127 (2007).10.1016/j.microrel.2006.07.093 ↗
8. Directive 2002/95/EC of the European Parliament and of the Council of 27 January 2003 on the restriction of the use of certain hazardous substances in electrical and electronic equipment.
9. Directive 2002/96/EC of the European Parliament and of the Council of 27 January 2003 on waste electrical and electronic equipment (WEEE).
10. M. Date, T. Shoji, M. Fujiyoshi, K. Sato, and K.N. Tu, Scr. Mater. 51, 641 (2004).10.1016/j.scriptamat.2004.06.027 ↗
11. K. Newman, Proceedings of the 55th Electronic Components and Technology Conference, (2005, Orlando, USA), pp. 1194–1201.
12. E.H. Wong, R. Rajoo, C.S. Selvanayagam, S.K.W. Seah, W.D. van Driel, J.F.J.M. Caers, X.J. Zhao, N. Owens, L.C. Tan, M. Leoni, P.L. Eu, Y.-S. Lai, and C.-L. Yeh, Microelectron. Reliab. 48, 1069 (2008).10.1016/j.microrel.2008.04.008 ↗
13. H.D. Solomon, J. Electron. Mater. 19, 929 (1990).10.1007/BF02652918 ↗
14. S.M. Lee and D.S. Stone, ASME Tran. J. Electron. Packag. 114, 118 (1992).10.1115/1.2906407 ↗
15. W.W. Lee, L.T. Nguyen, and G.S. Selvaduray, Microelectron. Reliab. 40, 231 (2000).10.1016/S0026-2714(99)00061-X ↗
16. X.Q. Shi, H.L.J. Pang, W. Zhou, and Z.P. Wang, Int. J. Fatigue 22, 217 (2000).10.1016/S0142-1123(99)00124-3 ↗
17. C. Kanchanomai, Y. Miyashita, and Y. Mutoh, Int. J. Fatigue 24, 987 (2002).10.1016/S0142-1123(02)00011-7 ↗
18. X.J. Yang, C.L. Chow, and K.J. Lau, Int. J. Fatigue 25, 533 (2003).10.1016/S0142-1123(02)00150-0 ↗
19. E.H. Wong, S.K.W. Seah, W.D. van Driel, J.F.J.M. Caers, N. Owens, and Y.-S. Lai, Microelectron. Reliab. 49, 139–149 (2009).10.1016/j.microrel.2008.12.001 ↗
20. X.J. Zhao, J.F.J.M. Caers, E.H. Wong, S.K.W. Seah, W.Dv. Driel, N. Owen, and Y-S. Lai, Proceedings of the 59th Electronic Components Technology Conference (2009), pp. 93–99.
21. S.K.W. Seah, E.H. Wong, and V.P.W. Shim, Scr. Mater. 59, 1239–1242 (2008).10.1016/j.scriptamat.2008.08.020 ↗
22. J.F.J.M. Caers, X.J. Zhao, E.H. Wong, S.K.W. Seah, C.S. Selvanayagam, W.D. van Driel, N. Owens, M. Leoni, L.C. Tan, P.L. Eu, Y.-S. Lai, and C.-L. Yeh, IEEE Trans. Electron. Packag. Manuf. 33, 84–90 (2010).10.1109/TEPM.2009.2039710 ↗
23. C.R. Siviour, S.M. Walley, W.G. Proud, and J.E. Field, J. Phys. D 38, 31 (2005).10.1088/0022-3727/38/22/018 ↗
24. E.H. Wong, C.S. Selvanayagam, S.K.W. Seah, W.D. van Driel, J.F.J.M. Caers, X.J. Zhao, N. Owens, L.C. Tan, D.R. Frear, M. Leoni, Y.-S. Lai, and C.-L. Yeh, J. Electron. Mater. 37, 829 (2008).10.1007/s11664-008-0403-x ↗