journal article·2020-04

Structural and Magnetic Characterization of Fe-Based Amorphous Alloy Prepared by Microwave Annealing Treatment

Song Ding, Min Liu, Zhanyong Wang, Zemin Wang, Binjun Wang, Ding Zhou, Minglin Jin, Yanli Sui

Journal of Electronic Materials· Volume 49· Issue 4
Publisher page

Abstract

Fe-based nanocrystalline soft-magnetic alloy presents the advantages of high permeability and low hysteresis loss and is widely used in the power electronics industry due to its excellent soft-magnetic properties. The effects of microwave annealing on the crystallization process and properties of Fe80.5Si10B8Cu1Nb0.5 amorphous alloy have been studied by differential scanning calorimetry, x-ray diffraction analysis, and vibrating-sample magnetometry. The crystallization process of Fe80.5Si10B8Cu1Nb0.5 amorphous alloy consists of two stages: α-Fe(Si) phase and Fe2B phase. The microwave annealing process enables a significant improvement in the soft-magnetic properties of Fe-based amorphous alloy, with the optimum magnetic properties being obtained for the alloys annealed at 1000 W for 10 min.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metallic Glasses and Amorphous Alloys · Magnetic Properties and Synthesis of Ferrites · Microstructure and mechanical properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (20)

Show source-provided references
1. B.V. Neamu, T.F. Marinca, I. Chicinas, and O. Isnard, J. Alloys Compd. 626, 49 (2015).10.1016/j.jallcom.2014.11.158 ↗
2. Z.Z. Li, S.X. Zhou, C.L. Zhao, L. Xue, G.Q. Zhang, and R. Xiang, Prog. Nat. Sci. 25, 263 (2015).10.1016/j.pnsc.2015.06.004 ↗
3. C.S. Olariu, G. Ababei, N. Lupu, and H. Chiriac, Phys. B 486, 48 (2016).10.1016/j.physb.2015.08.042 ↗
4. A. Inoue, Y. Shinohara, and J.S. Gook, Mater. Trans. JIM 36, 1427 (1995).10.2320/matertrans1989.36.1427 ↗
5. H.X. Li, S.L. Wang, S. Yi, Z.B. Jiao, Y. Wu, and Z.P. Lu, J. Magn. Magn. Mater. 321, 2833 (2009).10.1016/j.jmmm.2009.04.021 ↗
6. Z.P. Lu, C.T. Liu, J.R. Thompson, and W.D. Porter, Phys. Rev. Lett. 92, 245 (2004).
7. J.M. Park, G. Wang, R. Li, N. Mattern, J. Eckert, and D.H. Kim, Appl. Phys. Lett. 96, 031905 (2010).10.1063/1.3291668 ↗
8. J.H. Yao, J.Q. Wang, and Y. Li, Appl. Phys. Lett. 92, 251906 (2008).10.1063/1.2949747 ↗
9. W.L. Liu, Y.G. Wang, and F.G. Chen, J. Alloys Compd. 622, 751 (2015).10.1016/j.jallcom.2014.10.202 ↗
10. S. Dobák, J. Füzer, and P. Kollar, J. Alloys Compd. 651, 237 (2015).10.1016/j.jallcom.2015.08.084 ↗
11. Y. Han, X. Li, W.X. Lv, W.H. Xie, Q. Zhao, and Z.J. Zhao, J. Alloys Compd. 678, 494 (2016).10.1016/j.jallcom.2016.04.021 ↗
12. C.Z. Zhao, W.F. Jiang, S.J. Hao, Y.Z. Zhang, and C.Q. Gao, South. Metals 203, 1 (2015).
13. M.A. Meyers, A. Mishra, and D.J. Benson, Prog. Mater. Sci. 51, 427 (2006).10.1016/j.pmatsci.2005.08.003 ↗
14. Y.T. Zhu and X.Z. Liao, Nat. Mater. 3, 351 (2004).10.1038/nmat1141 ↗
15. M. Dao, L. Lu, R.J. Asaro, J.T.M. De Hosson, and E. Ma, Acta Mater. 55, 4041 (2007).10.1016/j.actamat.2007.01.038 ↗
16. M. Oghabaei and O. Mirzaee, J. Alloys Compd. 494, 175 (2010).10.1016/j.jallcom.2010.01.068 ↗
17. S. Chandrasekaran, S. Ramanathan, and T. Basak, AIChE J. 58, 330 (2012).10.1002/aic.12766 ↗
18. J.A. Pringle, US patent no. 7101464 (2006).
19. H.R. Lashgari, D. Chu, S.S. Xie, H.D. Sun, M. Ferry, and S. Li, J. Non-Cryst. Solids 391, 61 (2014).10.1016/j.jnoncrysol.2014.03.010 ↗
20. D.H. Jiang, B.W. Zhou, B.Y. Jiang, B. Ya, and X.G. Zhang, Phys. Status Solidi A 214, 1700074 (2017).10.1002/pssa.201700074 ↗