journal article·2019-05

Influence of Working Pressure on the Structural, Optical and Electrical Properties of Cr-Doped ZnO Thin Films

L. F. Han, C. F. Fu, C. Liu, X. B. Liu, R. H. Xie

Journal of Electronic Materials· Volume 48· Issue 5
Publisher page

Abstract

In this work, Cr-doped ZnO thin films with the hexagonal wurtzite structure and c-axis preferred orientation are prepared with the radio frequency magnetron sputtering technique. The variation of working pressure, from 1.3 Pa to 1.9 Pa, produces variations in the structural, optical and electrical properties of the films. X-ray diffraction results indicate that the intensity of the (002) peak in the films first increases, and then decreases, with an increase in the working pressure. Cr-doped ZnO thin films deposited at 1.5 Pa have perfect optical and electrical properties, a maximal crystal size of 13.43 nm, a transmittance of 85.40%, a minimal dislocation density of 5.544 × 1015 lines m−2, a quality factor of 7.43 × 104 S cm−1, a small residual stress of −0.135 GPa and a low resistivity of 1.15 × 10−3 Ω cm. The band gaps of the films increase with an increase in the working pressure. The results show that the working pressure influences the structural, optical and electrical properties of Cr-doped ZnO thin films.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: ZnO doping and properties · Gas Sensing Nanomaterials and Sensors · Copper-based nanomaterials and applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (35)

Show source-provided references
1. X. Wen, Y. Han, C.B. Yao, K.X. Zhang, J. Li, W.J. Sun, Q.H. Li, M. Zhang, and J.D. Wu, Opt. Mater. 77, 67 (2018).10.1016/j.optmat.2018.01.017 ↗
2. M. Dutta, T. Ghosh, and D. Basak, J. Electron. Mater. 38, 2335 (2009).10.1007/s11664-009-0908-y ↗
3. M.N.H. Mia, M.F. Pervez, M. Khalid Hossain, M. Reefaz Rahman, M. Jalal Uddin, M.A. Al Mashud, H.K. Ghosh, and M. Hoq, Res. Phys. 7, 2683 (2017).
4. P. Murkute, H. Ghadi, S. Saha, S.K. Pandey, and S. Chakrabarti, Mat. Sci. Semicond. Proc. 66, 1 (2017).10.1016/j.mssp.2017.03.026 ↗
5. J.W. Kang, B.H. Kim, H. Song, Y.R. Jo, and S.H. Hong, Nanoscale 31, 14812 (2018).10.1039/C8NR03711F ↗
6. T. Ghosh and D. Basak, Nanotechnology 21, 375202 (2010).10.1088/0957-4484/21/37/375202 ↗
7. R.S. Gonçalves, P. Barrozo, G.L. Brito, B.C. Viana, and F. Cunha, Thin Solid Films 661, 40 (2017).10.1016/j.tsf.2018.07.008 ↗
8. D. Zhao, M. Wu, R. Qin, and J.S. Yu, Opt. Lett. 43, 3212 (2018).10.1364/OL.43.003212 ↗
9. L. Ning, T.H. Jiang, Z.B. Shao, K. Ding, X.J. Zhang, and J.S. Jie, J. Mater. Chem. C 6, 16617 (2018).10.1039/C8TA05673K ↗
10. M. Patel, S.H. Park, and J. Kim, Data Brief 17, 520 (2018).10.1016/j.dib.2018.01.064 ↗
11. J.H. Park, M.G. Kim, H.M. Jang, Y.M. Kim, and S. Ryu, Appl. Phys. Lett. 84, 1338 (2004).10.1063/1.1650915 ↗
12. B.B. Straumal, A.A. Mazilkin, S.G. Protasova, A.A. Myatiev, P.B. Straumal, G. Schütz, P.A. van Aken, E. Goering, and B. Baretzky, Phys. Rev. B 79, 15 (2009).10.1103/PhysRevB.79.205206 ↗
13. A.J. Chen, X.M. Wu, Z.D. Sha, L.J. Zhuge, and Y.D. Meng, J. Phys. D Appl. Phys. 39, 4762 (2006).10.1088/0022-3727/39/22/004 ↗
14. M. Suja, S.B. Bashar, M.M. Morshed, and J. Liu, ACS Appl. Mater. Interfaces 7, 8894 (2015).10.1021/acsami.5b01564 ↗
15. C.L. David, B.G. Wang, and D.L. Kevin, Opt. Eng. 56, 034112 (2017).10.1117/1.OE.56.3.034112 ↗
16. O. Gürbüz and M. Okutan, Appl. Surf. Sci. 387, 1211 (2016).10.1016/j.apsusc.2016.06.114 ↗
17. Z.N. Kayani, M. Siddiq, S. Riaz, and S. Naseem, Mater. Res. Exp. 4, 096403 (2017).10.1088/2053-1591/aa81f1 ↗
18. M. Salem, S. Akir, I. Massoudi, Y. Litaiem, M. Gaidi, and K. Khirouni, Appl. Phys. A 123, 243 (2017).10.1007/s00339-017-0880-y ↗
19. C.F. Fu, L.F. Han, J.W. Lv, F.M. Wang, T. Sun, and C. Liu, J. Mater. Sci. Mater. Electron. 27, 354 (2016).
20. A. Zawadzka, P. Płóciennik, Y.E. Kouari, H. Bougharraf, and B. Sahraoui, J. Lumin. 169, 483 (2016).10.1016/j.jlumin.2015.04.020 ↗
21. G.E. Hallani, S. Nasih, N. Fazouan, A. Liba, and M. Khuili, J. Appl. Phys. 121, 1 (2017).10.1063/1.4979724 ↗
22. M.A. Rahman, M.R. Phillips, and C. Ton-That, J. Alloys Compd. 691, 339 (2017).10.1016/j.jallcom.2016.08.242 ↗
23. A. Kumar, P. Dhiman, and M. Singh, Ceram. Int. 42, 7918 (2016).10.1016/j.ceramint.2016.01.136 ↗
24. G. Yildirim, J. Mater. Sci. Mater. Electron. 23, 928 (2012).10.1007/s10854-011-0522-7 ↗
25. X.L. Zhang, S.Y. Ma, F.C. Yang, Q. Zhao, F.M. Li, and J. Liu, Ceram. Int. 39, 7993 (2013).10.1016/j.ceramint.2013.03.066 ↗
26. Z. Lu, L. Long, Z. Zhong, and C. Lan, J. Mater. Sci. Mater. Electron. 27, 2875 (2016).10.1007/s10854-015-4104-y ↗
27. M.C. Jun and J.H. Koh, Nanoscale Res. Lett. 7, 294 (2012).10.1186/1556-276X-7-294 ↗
28. S.B. Chen and Z.Y. Zhong, Adv. Mater. Resh 908, 124 (2014).10.4028/www.scientific.net/AMR.908.124 ↗
29. Y.Y. Liu, Y.L. Zang, G.X. Wei, J. Li, X.L. Fan, and C.F. Cheng, Mater. Lett. 63, 2597 (2009).10.1016/j.matlet.2009.08.027 ↗
30. R. Hong, J. Shao, H. He, and Z. Fan, Appl. Surf. Sci. 252, 2888 (2006).10.1016/j.apsusc.2005.04.041 ↗
31. Q.G. Lin, Chin. Phys. Lett. 25, 4223 (2008).10.1088/0256-307X/25/12/010 ↗
32. B.J. Zheng, J. Supercond. Nov. Magn. 24, 1627 (2011).10.1007/s10948-010-1069-1 ↗
33. Y. Liu, J.H. Yang, Q.F. Guan, L.L. Yang, Y.J. Zhang, Y.X. Wang, B. Feng, J. Cao, X.Y. Liu, Y.T. Tang, and M.B. Wei, J. Alloys Compd. 486, 835 (2009).10.1016/j.jallcom.2009.07.076 ↗
34. M. Mehedi Hassan, W. Khan, P. Mishra, S.S. Islam, and A.H. Naqvi, Mater. Res. Bull. 93, 391 (2017).10.1016/j.materresbull.2017.05.019 ↗
35. H. Czternastek, Vacuum 82, 994 (2008).10.1016/j.vacuum.2008.01.036 ↗