journal article·2018-10

Electrochemical Measurements of a Conducting Polymer for Optimizing Detector Applications

Hamida H. Hamid, A. M. Elshaer, Mohamed E. Harb, Sh. Ebrahim, Moataz M. Soliman

Journal of Electronic Materials· Volume 47· Issue 10
Publisher page

Abstract

An electrochemical method was used to prepare polyaniline (PANI) with hydrochloric acid as a dopant. This electroactive material was fabricated using electrically modified carbon coated Teflon electrodes with an area of 0.64 cm2 in 1 M HCl. PANI was electrochemically synthesized using cyclic voltammetry (CV) with a variable number of cycles, scan rates, and step sizes at potentials ranging from − 0.2 V to 0.8 V. Fabricated samples were tested using different electrochemical techniques including CV, differential pulse voltammetry (DPV) and electrochemical impedance spectroscopy (EIS). The DPV and EIS measurements indicate a linear relationship between both the current peak and the charge transfer resistance (Rct) and pH. These measurements showed that the prepared electrochemical device can be used as a sensor for pH. Optimum preparation parameters were 30 cycles, 50 mV/s scan rate and 2 mV step size. A linear relationship between oxidation current and pH of the solution with a correlation coefficient of 0.97 in the range of 1–5 makes PANI a candidate to be used as a pH sensor.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Conducting polymers and applications · Analytical Chemistry and Sensors · Electrochemical sensors and biosensors

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (10)

Show source-provided references
1. M.E. Harb, S. Ebrahim, M. Soliman, and M. Shabana, J. Electron. Mater. 47, 353 (2017).10.1007/s11664-017-5776-2 ↗
2. A.M. Elshaer, M. Tayel, S. Ebrahim, and M. Soliman, Sens. Actuator A 238, 389 (2016).10.1016/j.sna.2016.01.005 ↗
3. M.B. Tayel, M. Soliman, S. Ebrahim, and M.E. Harb, J. Electron. Mater. 45, 820 (2016).10.1007/s11664-015-4212-8 ↗
4. G. Inzelt, Conducting Polymers. Monographs in Electrochemistry, ed. F. Scholz (Springer, Berlin, 2008).
5. A.M.P. Hussain and A. Kumar, Bull. Mater. Sci. 26, 329 (2003).10.1007/BF02707455 ↗
6. W.C. Chen, T.C. Wen, C.C. Hu, and A. Gopalan, Electrochim. Acta 47, 1305 (2002).10.1016/S0013-4686(01)00849-0 ↗
7. S. Tawde, D. Mukesh, and J.V. Yakhmi, Synth. Metals 125, 401 (2002).10.1016/S0379-6779(01)00483-0 ↗
8. B. Wang, J. Tang, and F. Wang, Synth. Met. 18, 323 (1987).10.1016/0379-6779(87)90899-X ↗
9. A.Y. Obaid, E.H. El-Mossalamy, S.A. Al-Thabaiti, I.S. El-Hallag, A.A. Hermas, and A.M. Asiri, Int. J. Electrochem. Sci. 9, 1003 (2014).10.1016/S1452-3981(23)07773-8 ↗
10. H. Hamid, M.E. Harb, A.M. Elshaer, S. Ebrahim, and M. Soliman, Microsys. Technol. 24, 1775 (2018).10.1007/s00542-018-3793-6 ↗