Graphene-Decorated Nanocomposites for Printable Electrodes in Thin Wafer Devices
Source abstract
Abstract
Printable electrodes that induce less stress and require lower curing temperatures compared to traditional screen-printed metal pastes are needed in thin wafer devices such as future solar cells, and in flexible electronics. The synthesis of nanocomposites by incorporating graphene nanopowders as well as silver nanowires into epoxy-based electrically conductive adhesives (ECA) is examined to improve electrical conductivity and to develop alternate printable electrode materials that induce less stress on the wafer. For the synthesized graphene and Ag nanowire-decorated ECA nanocomposites, the curing kinetics were studied by dynamic and isothermal differential scanning calorimetry measurements. Thermogravimetric analysis on ECA, ECA-AG and ECA/graphene nanopowder nanocomposites showed that the temperatures for onset of decomposition are higher than their corresponding glass transition temperature (T g) indicating an excellent thermal resistance. Printed ECA/Ag nanowire nanocomposites showed 90% higher electrical conductivity than ECA films, whereas the ECA/graphene nanocomposites increased the conductivity by over two orders of magnitude. Scanning electron microscopy results also revealed the effect of fillers morphology on the conductivity improvement and current transfer mechanisms in nanocomposites. Residual stress analysis performed on Si wafers showed that the ECA and nanocomposite printed wafers are subjected to much lower stress compared to those printed with metallic pastes. The observed parameters of low curing temperature, good thermal resistance, reasonably high conductivity, and low residual stress in the ECA/graphene nanocomposite makes this material a promising alternative in screen-printed electrode formation in thin substrates.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Nanomaterials and Printing Technologies · Advanced Sensor and Energy Harvesting Materials · Nanowire Synthesis and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (28)
Show source-provided references
1. K. Nakayama, A. Nagai, and N. Iida, Mater. Trans. 48, 594 (2007).10.2320/matertrans.48.594 ↗
2. J. Hoomstra, G. Schubert, K. Broek, F. Granek, and C. LePrince, in Proceedings of 2005 31st IEEE Photovoltaic Specialists Conference (2005), p. 1293.
3. A. Goodrich, P. Hacke, Q. Wang, B. Sopori, R. Margolis, T. James, and M. Woodhouse, Sol. Energy Mater. Solar Cells 112, 110 (2013).10.1016/j.solmat.2013.01.030 ↗
4. R. Miles, K. Hynes, and I. Forbes, Prog. Cryst. Growth Charact. Mater. 51, 1 (2005).10.1016/j.pcrysgrow.2005.10.002 ↗
5. V. Popovich, M. Maris, M. Janssen, I. Bennett, and I. Richardson, Mater. Sci. Appl. (2013). doi: 10.4236/msa.2013.42013 .10.4236/msa.2013.42013 ↗
6. I. Cooper, A. Ebong, J. Renshaw, R. Reedy, M. Al-Jassim, and A. Rohatgi, IEEE Electron. Dev. Lett. 31, 461 (2010).10.1109/LED.2010.2044363 ↗
7. J.D. Fields, M.I. Ahmad, V. Pool, J. Yu, D.J. Van Campen, P.A. Parilla, M.F. Toney, and M.F.A.M. Van Hest, Nat. Commun. (2016). doi: 10.1038/ncomms11143 .10.1038/ncomms11143 ↗
8. S. Khan, L. Lorenzelli, and R. Dahiya, IEEE Sens. J. 15, 3164 (2015).10.1109/JSEN.2014.2375203 ↗
9. S. Xu, D.A. Dillard, and J.G. Dillard, J. Adhes. 23, 235 (2003).10.1016/S0143-7496(03)00027-7 ↗
10. H. Wolfson and G. Elliott, Electrically conducting cements containing epoxy resins and silver, US Patent No.: US2774747 A (1956).
11. J.C. Jagt, IEEE Trans. Compon. Packag. Manuf. Technol. 21, 215 (1998).10.1109/95.705467 ↗
12. Y. Li, D. Lu, and C.P. Wong, Electrical Conductive Adhesives with Nanotechnologies (New York: Springer, 2010), p. 15.10.1007/978-0-387-88783-8 ↗
13. J. Liu, Z. Lai, and H. Kristiansen, in Proceedings of 3rd International Conference on Adhesive Joining and Coating Technology in Electronics Manufacturing (1998), p. 1.
14. J.C. Jagt, P.J.M. Beris, and G.F.C.M. Lijten, IEEE Trans. Compon. Packag. Manuf. Technol. B 18, 292 (1995).10.1109/96.386264 ↗
15. D. Lu, and C.P. Wong, Int. J. Adhes. Adhes. 20, 189 (2000).10.1016/S0143-7496(99)00039-1 ↗
16. H.H. Lee, K.S. Chou, and Z.W. Shih, Int. J. Adhes. Adhes. 25, 437 (2005).10.1016/j.ijadhadh.2004.11.008 ↗
17. L. Fan, B. Su, J. Qu, and C. Wong, in Proceedings of 54th Electronic Components and Technology Conference (2004), p. 148.
18. H. Jiang, K. Moon, Y. Li, and C. Wong, Chem. Mater. 3, 2969 (2006).10.1021/cm0527773 ↗
19. M. Law, D.J. Sirbuly, J.C. Johnson, J. Goldberger, R.J. Saykally, and P. Yang, Science 305, 1269 (2004).10.1126/science.1100999 ↗
20. R.C. Jin, Y.W. Cao, C.A. Mirkin, K.L. Kelly, G.C. Schatz, and J.G. Zheng, Science 294, 1901 (2001).10.1126/science.1066541 ↗
21. Y. Huang, X.F. Duan, Q.Q. Wei, and C.M. Lieber, Science 291, 630 (2001).10.1126/science.291.5504.630 ↗
22. I. Novák, I. Krupa, and I. Chodák, Synth. Meter. 144, 13 (2004).10.1016/j.synthmet.2004.01.001 ↗
23. J. Trinidad, B.M. Amoli, W. Zhang, R. Pal, and B. Zhao, J. Mater. Sci. Mater. Electron. (2016). doi: 10.1007/s10854-016-5434-0 .10.1007/s10854-016-5434-0 ↗
24. B. Meschi, J. Trinidad, G. Rivers, S. Sy, P. Russo, and A. Yu, Carbon 91, 188 (2015).10.1016/j.carbon.2015.04.039 ↗
25. N.W. Pu, Y.Y. Peng, P.C. Wang, C.Y. Chen, J.N. Shi, Y.M. Liu, M.D. Ger, and C.L. Chang, Carbon 67, 449 (2013).
26. D. Perloff, Sol. State Electron. 20, 681 (1977).10.1016/0038-1101(77)90044-2 ↗
27. D. Wang, J. Mater. Chem. A 3, 21907 (2015).10.1039/C5TA02939B ↗
28. Y. Li, D. Lu, and C.P. Wong, Electrical Conductive Adhesives with Nanotechnologies (Dordrecht: Springer, 2010), pp. 166–178.10.1007/978-0-387-88783-8 ↗