Effect of Cooling Rate on the Microstructure and Mechanical Properties of Sn-1.0Ag-0.5Cu–0.2BaTiO3 Composite Solder
Source abstract
Abstract
The microstructure, interfacial intermetallic compound (IMC) layer, microhardness, tensile properties, and fracture surfaces of Sn-1.0Ag-0.5Cu–0.2BaTiO3 composite solder were explored under three different cooling conditions (water-, air-, and furnace-cooled) during solidification. The average grain size was refined and the volume fraction of primary β-Sn dendrites increased with increasing cooling rate. The thickness of the IMC layer increased as the cooling rate was decreased, and the morphology also transformed from scallop shaped, for a rapid cooling rate, to irregular shaped for slower cooling; a Cu3Sn IMC layer was detected between the Cu6Sn5 IMC and copper substrate under the furnace-cooled condition, but not in water- or air-cooled specimens. The mechanical properties, including the microhardness and tensile properties, improved with rapid solidification due to the combined effects of grain refinement and a secondary strengthening mechanism. Fracture surfaces after tensile tests showed that the amount of dimples decreased and a cleavage-like pattern increased as the cooling rate was decreased from the water-cooled to furnace-cooled condition, so the fracture process transformed from ductile to mixed-mode fracture. A refined microstructure and excellent mechanical properties were obtained for the rapidly cooled sample.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Electronic Packaging and Soldering Technologies · 3D IC and TSV technologies · Aluminum Alloys Composites Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (31)
Show source-provided references
1. P. Xue, S.B. Xue, Y.F. Shen, F. Long, and H. Zhu, J. Mater. Sci. 25, 3520 (2014).
2. H. Hao, Y.W. Shi, Z.D. Xia, Y.P. Lei, and F. Gao, J. Electron. Mater. 37, 2 (2008).10.1007/s11664-007-0263-9 ↗
3. L. Yang, Y.C. Zhang, J. Dai, Y.F. Jing, J.G. Ge, and N. Zhang, Mater. Des. 67, 209 (2015).10.1016/j.matdes.2014.11.036 ↗
4. I. Tsai, E.B. Wu, S.F. Yen, and T.H. Chuang, J. Electron. Mater. 35, 1059 (2006).10.1007/BF02692567 ↗
5. A.A. El-Daly and A.M. El-Taher, Mater. Des. 47, 607 (2013).10.1016/j.matdes.2012.12.081 ↗
6. J. Sigelko, S. Choi, K.N. Subramanian, J.P. Lucas, and T.R. Bieler, J. Electron. Mater. 28, 1184 (1999).10.1007/s11664-999-0155-2 ↗
7. O. Mokhtari and H. Nishikawa, J. Electron. Mater. 43, 4158 (2014).10.1007/s11664-014-3359-z ↗
8. H.B. Qin, W.Y. Li, M.B. Zhou, and X.P. Zhang, Microelectron. Reliab. 54, 2911 (2014).10.1016/j.microrel.2014.07.052 ↗
9. F. Ochoa, X. Deng, and N. Chawla, J. Electron. Mater. 33, 1596 (2004).10.1007/s11664-004-0103-0 ↗
10. F. Ochoa, J.J. Williams, and N. Chawla, J. Electron. Mater. 32, 1414 (2003).10.1007/s11664-003-0109-z ↗
11. F. Ochoa, J.J. Williams, and N. Chawla, JOM 55, 56 (2003).10.1007/s11837-003-0142-7 ↗
12. J. Shen, Y.C. Liu, Y.J. Han, H.X. Gao, C. Wei, and Y.Q. Yang, Trans. Nonferrous Met. Soc. China 16, 59 (2006).10.1016/S1003-6326(06)60011-3 ↗
13. X. Deng, N. Chawla, K.K. Chawla, and M. Koopman, Acta Mater. 52, 4291 (2004).10.1016/j.actamat.2004.05.046 ↗
14. J.M. Song, Y.R. Liu, Y.S. Lai, Y.T. Chiu, and N.C. Lee, Microelectron. Reliab. 52, 180 (2012).10.1016/j.microrel.2011.09.003 ↗
15. F.X. Che, W.H. Zhu, E.S.W. Poh, X.R. Zhang, X.W. Zhang, T.C. Chai, and S. Gao, J. Electron. Mater. 40, 344 (2011).10.1007/s11664-011-1510-7 ↗
16. N.A.A.M. Amin, D.A. Shnawah, S.M. Said, M.F.M. Sabri, and H. Arof, J. Alloys Compd. 599, 114 (2014).10.1016/j.jallcom.2014.02.100 ↗
17. M. Kuroda, D. Setoyama, M. Uno, and S. Yamanaka, J. Alloys Compd. 368, 211 (2004).10.1016/j.jallcom.2003.08.094 ↗
18. T. Fouzder, I. Shafiq, Y.C. Chan, A. Sharif, and W.K.C. Yung, J. Alloys Compd. 509, 1885 (2011).10.1016/j.jallcom.2010.10.081 ↗
19. T.H. Chuang, L.C. Tsao, C.H. Chung, and S.Y. Chang, Mater. Des. 39, 475 (2012).10.1016/j.matdes.2012.03.021 ↗
20. A.A. El-Daly and A.M. El-Taher, Mater. Des. 51, 789 (2013).10.1016/j.matdes.2013.04.081 ↗
21. W. Yang, L.E. Felton, and R.W.M. Jr, J. Electron. Mater. 24, 1465 (1995).10.1007/BF02655465 ↗
22. A.S. Budiman, C.S.H. Riege, W.C. Baek, C. Lor, A. Huang, H.S. Kim, G. Neubauer, J. Pak, P.R. Besser, and W.D. Nix, J. Electron. Mater. 39, 2483 (2010).10.1007/s11664-010-1356-4 ↗
23. H.A.S. Shin, B.J. Kim, J.H. Kim, S.H. Hwang, A.S. Budiman, H.Y. Son, K.Y. Byun, N. Tamura, M. Kuns, D.I. Kim, and Y.C. Joo, J. Electron. Mater. 41, 712 (2012).10.1007/s11664-012-1943-7 ↗
24. M.J. Burek, A.S. Budiman, Z. Jahed, N. Tamura, M. Kunz, S.M. Jin, S.M.J. Han, G. Lee, C. Zamecnik, and T.Y. Tsui, Mater. Sci. Eng. A 528, 5822 (2011).10.1016/j.msea.2011.04.019 ↗
25. A.S. Budiman, G. Lee, M.J. Burek, D.C. Jang, S.M.J. Han, N. Tamura, M. Kunz, J.R. Greer, and T.Y. Tsui, Mater. Sci. Eng. A 538, 89 (2012).10.1016/j.msea.2012.01.017 ↗
26. A.S. Budiman, G. Lee, M.J. Burek, D.C. Jang, S.M.J. Han, N. Tamura, M. Kunz, J.R. Greer, and T.Y. Tsui, J. Mater. Res. 27, 599 (2012).10.1557/jmr.2011.421 ↗
27. A.S. Budiman, G. Iiiya, V. Handara, W.A. Caldwell, C. Bonelli, M. Kunz, N. Tamura, and D. Verstraeten, Sol. Energy Mater. Sol. Cells 130, 303 (2014).10.1016/j.solmat.2014.07.029 ↗
28. A.S. Budiman, H.A.S. Shin, B.J. Kim, S.H. Hwang, H.Y. Son, M.S. Suh, Q.H. Chung, K.Y. Byun, N. Tamura, M. Kunz, and Y.C. Joo, Microelectron. Reliab. 52, 530 (2012).10.1016/j.microrel.2011.10.016 ↗
29. B.C. Valek, J.C. Bravman, N. Tamura, A.A. Macdowell, R.S. Celestre, H.A. Padmore, R. Spolenak, W.L. Brown, B.W. Batterman, and J.R. Patel, Appl. Phys. Lett. 81, 4168 (2002).10.1063/1.1525880 ↗
30. H.B. Qin, X.P. Zhang, M.B. Zhou, J.B. Zeng, and Y.W. Mai, Mater. Sci. Eng. A 617, 14 (2014).10.1016/j.msea.2014.08.008 ↗
31. A.S. Budiman, N. Li, Q. Wei, J.K. Baldwin, J. Xiong, H. Luo, D. Trugman, Q.X. Jia, N. Tamura, M. Kunz, K. Chen, and A. Misra, Thin Solid Films 519, 4137 (2011).10.1016/j.tsf.2010.12.077 ↗