Fabrication and Thermoelectric Power Factor of CoSb3 Prepared using Modified Polyol Process and Evacuated- and-Encapsulated Sintering
Source abstract
Abstract
Various reaction temperatures have been investigated to stabilize the CoSb3 phase obtained by a modified polyol process using a refluxing condenser. The resulting powders were cold-pressed and sintered in an evacuated-and- encapsulated ampoule for transport measurements. Single-phase CoSb3 could be produced for the reaction carried out at 448 K for a short duration of 15 min followed by evacuated-and-encapsulated sintering at 848 K for 5 h. In comparison with the sample sintered at 798 K, the sample sintered at 848 K exhibits lower resistivity and thermopower. Due to the sign crossover of the thermopower, the latter sample shows lower power factor for temperatures above 475 K.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Thermoelectric Materials and Devices · Chalcogenide Semiconductor Thin Films · Advanced Semiconductor Detectors and Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (14)
Show source-provided references
1. M.S. Toprak, and C. Stiewe, et al., Adv. Funct. Mater. 14, 1189 (2004).10.1002/adfm.200400109 ↗
2. T. Kyratsi, and J.S. Dyck, et al., J. Appl. Phys. 92, 965 (2002).10.1063/1.1481967 ↗
3. C. Uher, Recent Trends in Thermoelectric Materials Research I, Semiconductors and Semimetals, Vol. 69, ed. T.M. Tritt (San Diego: Academic, 2001), p. 139.10.1016/S0080-8784(01)80151-4 ↗
4. G.S. Nolas, D.T. Morelli, and T.M. Tritt, Annu. Rev. Mater. Sci. 29, 89 (1999).10.1146/annurev.matsci.29.1.89 ↗
5. Y. Zhu, H. Shen, L. Zuo, and H. Guan, J. Solid State Commun. 151, 1388 (2011).10.1016/j.ssc.2011.06.008 ↗
6. W.-S. Liu, B.-P. Zhang, J.-F. Li, and L.-D. Zhao, J. Phys. D Appl. Phys. 40, 6784 (2007).
7. K. Koga, K. Akai, K. Oshiro, and M. Matsuura, Phys. Rev. B 71, 155119 (2005).10.1103/PhysRevB.71.155119 ↗
8. J.L. Mi, X.B. Zhao, T.J. Zhu, and J.P. Tu, J. Appl. Phys. Lett. 91, 172116 (2007).10.1063/1.2803847 ↗
9. J.L. Mi, X.B. Zhao, T.J. Zhu, J.P. Tu, and G.S. Cao, J. Alloys Compd. 417, 269 (2006).10.1016/j.jallcom.2005.09.033 ↗
10. D. Li, K. Yang, H.H. Hng, Q.Y. Yan, J. Ma, T.J. Zhu, and X.B. Zhao, J. Phys. D Appl. Phys. 42, 105408 (2009).10.1088/0022-3727/42/10/105408 ↗
11. A. Harnwunggmoung, K. Kurosaki, Y. Ohishi, H. Muta, and S. Yamanaka, J. Alloys Compd. 509, 1084 (2011).10.1016/j.jallcom.2010.09.207 ↗
12. W.-S. Liu, Bo-Ping Zhang, Jing-Feng Li and Li-Dong Zhao. J. Phys. D Appl. Phys. 40, 566 (2007).10.1088/0022-3727/40/2/035 ↗
13. L. Yang, H.H. Hng, H. Cheng, T. Sun, and J. Ma, J. Mater. Lett. 62, 2483 (2008).10.1016/j.matlet.2007.12.054 ↗
14. C.-J. Liu, L.-C. Huang, and J.-S. Wang, Appl. Phys. Lett. 89, 204102 (2006).10.1063/1.2390666 ↗