journal article·2016-08

Effect of Processing Routes on Electrical Properties of Polymer/Iron Composites

C. Kale, P. Dhoka, R. K. Goyal

Journal of Electronic Materials· Volume 45· Issue 8
Publisher page

Abstract

Electrical properties of the polypropylene/iron (PP/Fe) composites containing unmodified and modified-Fe powder were studied. The composites prepared by twin screw extruder followed by hot compaction showed percolation threshold at 4.7 vol.% Fe. The treatment of Fe powder does not affect the percolation threshold value. However, above percolation for a given volume fraction (i.e., 10 vol.%) the electrical conductivity of the PP/modified-Fe composites is two orders of magnitude higher than those of PP/unmodified-Fe composites. The electrical conductivity of the 10 vol.% composites increased by more than 12 orders of magnitude compared to pure PP. The percolation threshold of the composites prepared by a simple ball mill followed by hot compaction is about 7.1 vol.% Fe, and the highest conductivity of these composites is 100 S/cm, i.e., three orders of magnitude higher than the composites prepared by the former route. This discrepancy was attributed to a non-uniform dispersion of Fe-clusters in the composites prepared by ball milling followed by hot compaction. In contrast, the extrusion route resulted in better dispersion of Fe particles in the PP matrix.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Natural Fiber Reinforced Composites · High voltage insulation and dielectric phenomena · Electromagnetic wave absorption materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (18)

Show source-provided references
1. T. Joseph, S. Uma, J. Philip, and M.T. Sebastian, J. Mater. Sci. Mater. Electron. 23, 1243 (2012).10.1007/s10854-011-0581-9 ↗
2. J. Chameswary and M.T. Sebastian, J. Mater. Sci. Mater. Electron. 26, 4629 (2015).10.1007/s10854-015-2879-5 ↗
3. S.M. Yuen, C.C.M. Ma, C.Y. Chuang, K.C. Yu, S.Y. Wu, C.C. Yang, and M.H. Wei, Compos. Sci. Technol. 68, 963 (2008).10.1016/j.compscitech.2007.08.004 ↗
4. K. Kalaitzidou, H. Fukushima, and L.T. Drzal, Compos. Sci. Technol. 67, 2045 (2007).10.1016/j.compscitech.2006.11.014 ↗
5. R.K. Goyal, Mater. Chem. Phys. 142, 195 (2013).10.1016/j.matchemphys.2013.07.005 ↗
6. Z.M. Elimat, F.S. Aqrabawi, T.A. Hazeem, Y. Ramadin, and A.M. Zihlif, Int. J. Thermophys. 34, 2009 (2013).10.1007/s10765-013-1499-7 ↗
7. A. Boudenne, L. Ibos, and M. Fois, Compos. A 36, 1545 (2005).10.1016/j.compositesa.2005.02.005 ↗
8. R.K. Goyal, K.R. Kamble, and S.S. Nene, Mater. Chem. Phys. 128, 114 (2011).10.1016/j.matchemphys.2011.02.065 ↗
9. R.K. Goyal and R. Sulakhe, Adv. Mater. Lett. 6, 309 (2015).10.5185/amlett.2015.5627 ↗
10. Q.H. Xue, Eur. Polym. J. 40, 323 (2004).10.1016/j.eurpolymj.2003.10.011 ↗
11. F.S. AL-Aqrabawi, A.M. Zihlif, and Z.M. Elimat, J. Mater. Sci. Mater. Electron. 24, 169 (2013).
12. L.C. Costa, M. Valente, M.A. Sá, and F. Henry, Polym. Bull. 57, 881 (2006).10.1007/s00289-006-0648-6 ↗
13. G.C. Psarras, Compos. A 37, 1545 (2006).10.1016/j.compositesa.2005.11.004 ↗
14. K. Schledjewski and J. Karger-Kocsis, J. Therm. Compos. Mater. 7, 270 (1994).10.1177/089270579400700308 ↗
15. A. Malliaris and D.T. Turner, J. App. Phys. 42, 614 (1971).10.1063/1.1660071 ↗
16. M.G. Kulthe and R.K. Goyal, Adv. Mat. Lett. 3, 246 (2012).10.5185/amlett.2012.3326 ↗
17. Y. Agari, A. Ueda, and S. Nagai, J. Appl. Polym. Sci. 42, 1665 (1991).10.1002/app.1991.070420621 ↗
18. D.M. Kalyon, E. Birinci, R. Yazici, B. Karur, and S. Walsh, Polym. Eng. Sci. 42, 1609 (2002).10.1002/pen.11056 ↗