journal article·2016-01

Effect of Screen-Printing Mesh Opening Diameter on Microstructural and Electrical Properties of La0.6Sr0.4Co0.2Fe0.8O3−δ Thick Films

Atul P. Jamale, C.H. Bhosale, L.D. Jadhav

Journal of Electronic Materials· Volume 45· Issue 1
Publisher page

Abstract

The performance of solid oxide fuel cells (SOFCs) is hampered by the large polarization and ohmic losses across the cathode–electrolyte interface. To minimize these losses, in most SOFCs the cathode is obtained by thick-film deposition techniques. Since the properties of such films depend upon the starting materials and screen-printing parameters, the effect of the mesh opening diameter on the physiochemical properties of cathodes for intermediate-temperature (IT)-SOFCs has been studied. Combustion-synthesized La0.6Sr0.4Co0.2Fe0.8O3−δ powder with specific surface area of 11.64 m2 g−1 was utilized in film formation. All films were porous in nature, and the thickness was observed to increase with the mesh opening diameter. The electrical conductivity showed a decreasing trend with film thickness. Typically, film with 7 μm thickness showed moderate conductivity of 16.4 S cm−1 with Ea = 0.1 eV.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Solid Oxide Fuel Cells · Electronic and Structural Properties of Oxides · Magnetic and transport properties of perovskites and related materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (20)

Show source-provided references
1. K. Sundmacher, Ind. Eng. Chem. Res. 49, 10159 (2010).10.1021/ie100902t ↗
2. W. Sun, X. Huang, Z. Lu, L. Zhao, B. Wei, S. Li, K. Chen, N. Ai, and W. Su, J. Phys. Chem. Solids 70, 164 (2009).10.1016/j.jpcs.2008.09.019 ↗
3. P. Datta, P. Majewski, and F. Aldinger, Mater. Chem. Phys. 107, 370 (2008).10.1016/j.matchemphys.2007.08.001 ↗
4. D. Rembelski, J.P. Viricelle, L. Combemale, and M. Rieu, Fuel Cells 12, 256 (2012).10.1002/fuce.201100064 ↗
5. K. Swierczek and M. Gozu, J. Power Sources 173, 695 (2007).10.1016/j.jpowsour.2007.05.052 ↗
6. S.H. Chan, X.J. Chen, and K.A. Khor, J. Electrochem. Soc. 151, A164 (2004).10.1149/1.1630036 ↗
7. J. Gerblinger, M. Hausner, and H. Meixner, J. Am. Ceram. Soc. 78, 1451 (1995).10.1111/j.1151-2916.1995.tb08836.x ↗
8. C. Novone, M. Soulier, M. Plissonnier, and A.L. Seiller, J. Electron. Mater. 39, 1755 (2010).10.1007/s11664-010-1187-3 ↗
9. A.P. Jamale, S.T. Jadhav, S.U. Dubal, C.H. Bhosale, and L.D. Jadhav, J. Phys. Chem. Solids 85, 96 (2015).10.1016/j.jpcs.2015.05.012 ↗
10. Y. Takizawa and D.D.L. Chung, J. Electron. Mater. 44, 2211 (2015).10.1007/s11664-015-3667-y ↗
11. S. Chen and R. Wang, Vacuum 85, 909 (2011).10.1016/j.vacuum.2010.11.012 ↗
12. T. Ryll, A. Brunner, S. Ellenbroek, A.B. Hutter, L.M. Jennifer, and L. Ruppa, J. Gauckler Phys. Chem. Chem. Phys. 12, 13933 (2010).10.1039/c0cp00889c ↗
13. M.G. Rasteiro and E. Antunes, Part. Sci. Technol. 23, 361 (2005).10.1080/02726350500212970 ↗
14. P. Ried, C. Lorenz, A. Bronstrup, T. Graule, N.H. Menzler, and W. Sitte, J. Eur. Ceram. Soc. 28, 1801 (2008).10.1016/j.jeurceramsoc.2007.11.018 ↗
15. K.L. Mendoza, A. Ortega, and N.S. Kimi, J. Electron. Mater. 44, 784 (2015).10.1007/s11664-014-3506-6 ↗
16. G.E. Jabbour, R. Radspinner, and N. Peyghambarian, IEEE J. Sel. Top. Quantum Electron. 7, 769 (2001).10.1109/2944.979337 ↗
17. Y. Kim, K.H. Lee, T.H. Sung, S.C. Han, Y.H. Han, N.H. Jeong, and K. No, J. Electron. Mater. 36, 1252 (2007).10.1007/s11664-007-0212-7 ↗
18. A.P. Jamale, S.U. Dubal, S.P. Patil, C.H. Bhosale, and L.D. Jadhav, Appl. Surf. Sci. 286, 78 (2013).10.1016/j.apsusc.2013.09.020 ↗
19. A. Zomorrodian, H. Salamati, Z. Lu, X. Chen, N. Wu, and A. Ignatiev, Int. J. Hydrogen Energy 35, 12443 (2010).10.1016/j.ijhydene.2010.08.100 ↗
20. J.E. Elshof, H.J.M. Bouwmeester, and H. Verweij, Solid State Ion. 81, 97 (1995).10.1016/0167-2738(95)00177-8 ↗