Evaluation of High Step-Up Power Electronics Stages in Thermoelectric Generator Systems
Source abstract
Abstract
To develop practical thermoelectric generator (TEG) systems, especially radioisotope thermoelectric power supplies for deep-space exploration, a power conditioning stage with high step-up gain is indispensable. This stage is used to step up the low output voltage of thermoelectric generators to the required high level. Furthermore, maximum power point tracking control for TEG modules needs to be implemented into the power electronics stages. In this paper, the temperature-dependent electrical characteristics of a thermoelectric generator are analyzed in depth. Three typical high step-up power converters suitable for TEG applications are discussed: an interleaved boost converter, a boost converter with a coupled inductor and an interleaved boost converter with an auxiliary transformer. A general comparison of the three high step-up converters is conducted to study the step-up gain, conversion efficiency and input current ripples. The interleaved boost converter with an auxiliary transformer is found to be the most suitable topology for TEG applications, which is verified by experiments.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced DC-DC Converters · Hybrid Renewable Energy Systems · Innovative Energy Harvesting Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (15)
Show source-provided references
1. S. Lineykin and S. Ben-Yaakov, IEEE Trans. Ind. Appl. 43, 505 (2007).10.1109/TIA.2006.889813 ↗
2. L. Ni, K. Sun, L. Zhang, Y. Xing, M. Chen, and L. Rosendahl. Proceedings of 2011 International Conference on Electrical Machines and Systems (2011).
3. J. Gao, K. Sun, L. Ni, M. Chen, Z. Kang, L. Zhang, Y. Xing, and J. Zhang, J. Electron. Mater. 41, 1043 (2012).10.1007/s11664-012-2034-5 ↗
4. R. Kim, J.-S. Lai, B. York, and A. Koran, IEEE Trans. Ind. Electron. 56, 3709 (2009).10.1109/TIE.2009.2025717 ↗
5. X. Zhang, W. Li, and J. Li. Proceedings of 8th International Conference on Advances in Power System Control, Operation and Management. (2009), pp. 1–6, 8–11.
6. J. Eakburanawat and I. Boonyaroonate, Appl. Energy 83, 687 (2006).10.1016/j.apenergy.2005.06.004 ↗
7. R.Y. Kim and J.S. Lai. Proceedings of 23th IEEE Applied Power Electronics Conference and Exposition (2008), pp. 1754–1760.
8. Y.P. Hsieh, J.F. Chen, T.J. Liang, and L.S. Yang, IEEE Trans. Ind. Electron. 60, 1473 (2013).10.1109/TIE.2011.2107721 ↗
9. W. Li, X. Lv, Y. Deng, J. Liu, and X. He. Proceedings of 24th Applied Power Electronics Conference and Exposition (2009), pp. 364–369.
10. B. Huang, I. Sadli, J.-P. Martin, and B. Davat. Proceedings of IEEE Conference on Vehicle Power and Propulsion (2006), pp. 1–6.10.1109/VPPC.2006.364369 ↗
11. L. Huber and M.M. Jovanovic. Proceedings of 15th IEEE Applied Power Electronics Conference and Exposition (2000), pp. 1163–1169.
12. M.G. Ortiz-Lopez, J. Leyva-Ramos, E.E. Carbajal-Gutierrez, and J.A. Morales-Saldana, IET Power Electron. 1, 478 (2008).10.1049/iet-pel:20070379 ↗
13. M. Chen, L.A. Rosendahl, T.J. Condra, and J.K. Pedersen, IEEE Trans. Energy Convert. 24, 112 (2009).10.1109/TEC.2008.2005310 ↗
14. H.-W. Seong, H.-S. Kim, K.-B. Park, G.-W. Moon, and M.-J. Youn. Proceeding of IEEE Energy Conversion Congress and Exposition (2010), pp. 823–829.10.1109/ECCE.2010.5617913 ↗
15. G. Spiazzi, P. Mattavelli, J.R. Gazoli, R. Magalhaes, and G. Frattini. Proceeding of IEEE International Conference on Industrial Technology (2010), pp. 1169–1174.