journal article·2014-01Open access

Incorporation of Interfacial Intermetallic Morphology in Fracture Mechanism Map for Sn-Ag-Cu Solder Joints

Z. Huang, P. Kumar, I. Dutta, R. Sidhu, M. Renavikar, R. Mahajan

Journal of Electronic Materials· Volume 43· Issue 1

Abstract

A fracture mechanism map (FMM) is a powerful tool which correlates the fracture behavior of a material to its microstructural characteristics in an explicit and convenient way. In the FMM for solder joints, an effective thickness of the interfacial intermetallic compound (IMC) layer (t (eff)) and the solder yield strength (sigma (ys,eff)) are used as abscissa and ordinate axes, respectively, as these two predominantly affect the fracture behavior of solder joints. Earlier, a definition of t (eff), based on the uniform thickness of IMC (t (u)) and the average height of the IMC scallops (t (s)), was proposed and shown to aptly explain the fracture behavior of solder joints on Cu. This paper presents a more general definition of t (eff) that is more widely applicable to a range of metallizations, including Cu and electroless nickel immersion gold (ENIG). Using this new definition of t (eff), mode I FMM for SAC387/Cu joints has been updated and its validity was confirmed. A preliminary FMM for SAC387/Cu joints with ENIG metallization is also presented.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Electronic Packaging and Soldering Technologies · Advanced Welding Techniques Analysis · Metal Forming Simulation Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (15)

Show source-provided references
1. B. Zhang, H. Ding, and X. Sheng, Microelectron. Reliab. 49, 530 (2009).10.1016/j.microrel.2009.02.024 ↗
2. J.G. Lee, A. Telang, K.N. Subramanian, and T.R. Bieler, J. Electron. Mater. 31, 1152 (2002).10.1007/s11664-002-0004-z ↗
3. J.H.L. Pang, B.S. Xiong, and T.H. Low, 54th Electronic Components and Technology Conference, Las Vegas, 2004.
4. S.M. Hayes, N. Chawla, and D.R. Frear, Microelectron. Reliab. 49, 269 (2009).10.1016/j.microrel.2008.11.004 ↗
5. K.S. Siow and M. Manoharan, Mater. Sci. Eng. A 404A, 244 (2005).10.1016/j.msea.2005.05.086 ↗
6. S.M. Joo and H.K. Kim, Mater. Sci. Eng. A 528, 2711 (2011).10.1016/j.msea.2010.12.003 ↗
7. X. Li, F. Li, F. Guo, and Y. Shi, J. Electron. Mater. 40, 51 (2011).10.1007/s11664-010-1401-3 ↗
8. S.V. Nadimpalli and J.K. Spelt, Mater. Sci. Eng. A 527, 724 (2010).10.1016/j.msea.2009.08.046 ↗
9. D.S. Liu, C.Y. Kuo, C.L. Hsu, G.S. Shen, Y.R. Chen, and K.C. Lo, Mater. Sci. Eng. A 494, 196 (2008).10.1016/j.msea.2008.04.015 ↗
10. P. Kumar, I. Dutta, V. Sarihan, D.R. Frear, and M. Renavikar, Proc. 11th Intersociety Conf. on Thermal and Thermomechanical Phenomena in Electronic Systems (ITherm) (Orlando: IEEE/ASME, 2008).
11. P. Kumar, Z. Huang, I. Dutta, R. Sidhu, M. Renavikar, and R. Mahajan, J. Electron. Mater. 41, 412 (2012).10.1007/s11664-011-1806-7 ↗
12. Z. Huang, P. Kumar, I. Dutta, J.H.L. Pang, R. Sidhu, M. Renavikar, and R. Mahajan, J. Electron. Mater. 41, 375 (2012).10.1007/s11664-011-1769-8 ↗
13. X. Long, R. Guduru, I. Dutta, V. Sarihan, and D.R. Frear, J. Electron. Mater. 37, 189 (2008).10.1007/s11664-007-0316-0 ↗
14. J.H.L. Pang and B.S. Xiong, IEEE Trans. Compon. Packag. Technol. 28, 830 (2005).10.1109/TCAPT.2005.848587 ↗
15. X. Deng, R.S. Sidhu, P. Johnson, and N. Chawla, Metall. Mater. Trans. 36A, 55 (2005).10.1007/s11661-005-0138-8 ↗