journal article·2013-10

Effects of Compression and Filler Particle Coating on the Electrical Conductivity of Thermoplastic Elastomer Composites

Willem M. Albers, Mikko Karttunen, Lisa Wikström, Taisto Vilkman

Journal of Electronic Materials· Volume 42· Issue 10
Publisher page

Abstract

Elastomeric polymers can be filled with metallic micro- or nanoparticles to obtain electrical conductivity, in which the conductivity is largely determined by the intrinsic conductivity of and contact resistance between the particles. Electrons will flow through the material effectively when the percolation threshold for near-neighbor contacts is exceeded and sufficiently close contacts between the filler particles are realized for electron tunneling to occur. Silver-coated glass microparticles of two types (fibers and spheres) were used as fillers in a thermoplastic elastomer composite based on styrene–ethylene–butylene–styrene copolymer, and the direct-current (DC) resistance and radiofrequency impedance were significantly reduced by coating the filler particles with octadecylmercaptan. Not only was the resistance reduced but also the atypical positive piezoresistivity effect observed in these elastomers was strongly reduced, such that resistivity values below 0.01 Ω cm were obtained for compression ratios up to 20%. In the DC measurements, an additional decrease of resistivity was obtained by inclusion of π-extended aromatic compounds, such as diphenylhexatriene. Some qualitative theories are presented to illuminate the possible mechanisms of action of these surface coatings on the piezoresistivity.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Sensor and Energy Harvesting Materials · Conducting polymers and applications · Dielectric materials and actuators

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (38)

Show source-provided references
1. V. Tanrattanakul and A. Bunchuay, J. Appl. Polym. Sci. 105, 2036 (2007).10.1002/app.26303 ↗
2. G.R. Ruschau and R.E. Newnham, J. Compos. Mater. 26, 2727 (1992).10.1177/002199839202601805 ↗
3. S. Wang, P. Wang, and T. Ding, Polym. Compos. 32, 29 (2011).10.1002/pc.21012 ↗
4. L.G. Pedroni, M.A. Soto-Oviedo, J.M. Rosolen, M.I. Felisberti, and A.F. Nogueira, J. Appl. Polym. Sci. 112, 3241 (2009).10.1002/app.29897 ↗
5. D. Yuping, L. Shunhua, and G. Hongtao, Sci. Technol. Adv. Mater. 6, 513 (2005).10.1016/j.stam.2005.01.002 ↗
6. P.K. Pramanik, D. Khastgir, S.K. De, and T.N. Saha, J. Mater. Sci. 9, 3848 (2009).
7. G.R. Ruschau, S. Yoshikawa, and R.E. Newnham, J. Appl. Phys. 72, 953 (1992).10.1063/1.352350 ↗
8. W.B. Genetti, W.L. Yuan, B.P. Brady, E.A. O’Rear, C.L. Lai, and D.T.J. Glatzhofer, Mater. Sci. 33, 3085 (1998).10.1023/A:1004387621165 ↗
9. M. Karttunen, P. Ruuskanen, V. Pitkänen, and W.M. Albers, J. Electron. Mater. 37, 951 (2008).10.1007/s11664-008-0451-2 ↗
10. S. Ata, K. Kobashi, M. Yumura, and K. Hata, Nano Lett. 12, 2710 (2012). doi: 10.1021/nl204221y .10.1021/nl204221y ↗
11. E.K. Sichel, Carbon Black-Polymer Composites: The Physics of Electrically Conducting Composites (New York: Dekker, 1982).
12. S. Bhattacharya, Metal Filled Polymers (New York: Dekker, 1986).
13. S. Radhakrishnan, Polym. Commun. 26, 157 (1985).
14. D.T. Beruto, M. Capurro, and G. Marro, Sens. Actuators A 117, 301 (2005).10.1016/j.sna.2004.06.027 ↗
15. F. Carmona, R. Canet, and P. Delhaes, J. Appl. Phys. 61, 2550 (1987).10.1063/1.337932 ↗
16. J. Zhu, S. Wei, J. Ryu, and Z. Guo, J. Phys. Chem. C 115, 13215 (2011).10.1021/jp202999c ↗
17. S. Radhakrishnan and D.R. Saini, J. Mater. Sci. 26, 5950 (1987).10.1007/BF01130140 ↗
18. K.-H. Müller, J. Herrmann, B. Raguse, G. Baxter, and T. Reda, Phys. Rev. B 66, 075417 (2002).10.1103/PhysRevB.66.075417 ↗
19. M. Knite, V. Teteris, A. Kiploka, and J. Kaupuzs, Sens. Actuators A 110, 142 (2004).10.1016/j.sna.2003.08.006 ↗
20. B. Lundberg and B. Sundqvist, J. Appl. Phys. 60, 1074 (1986).10.1063/1.337401 ↗
21. M. Taya, W.J. Kim, and K. Ono, Mech. Mater. 28, 53 (1998).10.1016/S0167-6636(97)00064-1 ↗
22. M. Taya, Composites A 30, 531 (1999).10.1016/S1359-835X(98)00146-8 ↗
23. H. Morinaga, S. Miyake, T. Sato, Eur. Patent 144849 (1985).
24. K.E. Müggenburg, X.-M. Lin, R.H. Goldsmith, and H.M. Jäger, Nat. Mater. 6, 656 (2007).10.1038/nmat1965 ↗
25. J. Tominaga, J. Phys. 15, R1101 (2003).
26. W.M. Albers, J. Likonen, J. Peltonen, O. Teleman, and H. Lemmetyinen, Thin Solid Films 330, 114 (1998).10.1016/S0040-6090(98)00610-5 ↗
27. W.M. Albers, J.O. Lekkala, L. Jeuken, G.W. Canters, and A.F.P. Turner, Bioelectrochem. Bioenergy 42, 25 (1997).10.1016/S0302-4598(96)05150-1 ↗
28. W. M. Albers, M. Karttunen, T. Vilkman, US 6875375 (2005).
29. W.M. Albers, G.W. Canters, and J. Reedijk, Tetrahedron 51, 3895 (1995).10.1016/0040-4020(95)00111-K ↗
30. M. Karttunen, J. Mustonen, US 2002/0043654 (2002).
31. ARP-1705, Coaxial test procedure to measure the RF shielding characterisics of EMI gasket materials, Soc. Automotive Eng. Inc., USA (1981).
32. F. Pei, S. Wu, G. Wang, M. Xu, S.-Y. Wang, L.-Y. Chen, and Y.J. Jia, Korean Phys. Soc. 55, 1243 (2009).10.3938/jkps.55.1243 ↗
33. Y.L. Chen, C.A. Helm, and J.N. Israelachvili, Langmuir 7, 2694 (1991).10.1021/la00059a049 ↗
34. H. Sellers, A. Ulman, Y. Shnidman, and J.E.J. Eilers, J. Am. Chem. Soc. 115, 9389 (1993).10.1021/ja00074a004 ↗
35. S. Subramanian and S. Sampath, J. Indian Inst. Sci 89, 1 (2009).
36. D.J. Wold and C.B. Frisbie, J. Am. Chem. Soc. 122, 2970 (2000).10.1021/ja994468h ↗
37. J. Lu, K.-S. Moon, and C.P. Wong, J. Mater. Chem. 18, 4821 (2008).10.1039/b807566b ↗
38. R.E. Holmlin, R. Haag, M.L. Chabinyc, R.F. Ismagilov, A.E. Cohen, A. Terfort, M.A. Rampi, and G.M.J. Whitesides, J. Am. Chem. Soc. 123, 5075 (2001).10.1021/ja004055c ↗