Microgenerator Using BiSbTe-Pt Thermopile and Pt-Al2O3 Ceramic Combustor
Source abstract
Abstract
The performance of a microcombustor thermoelectric generator device based on a thermopile using p-type Bi0.3Sb1.7Te3 (BST) and n-type Pt films has been investigated. The BST films were prepared by two different methods—pulsed laser deposition (PLD) and sputter deposition—on Si3N4/SiO2 multilayers on Si substrate. The ceramic catalyst combustor was patterned on the thermopile end on a thin membrane fabricated by back-side bulk etching of the silicon substrate. At 138°C the thermoelectric power factors of the PLD and sputter-deposited films were 3.6 × 10−3 W/mK2 and 0.22 × 10−3 W/mK2, respectively. The power from the generator with the sputter-deposited film was 0.343 μW, which was superior to that of the device with the PLD film, which provided 0.1 μW, for combustion of a 200 sccm flow of 3 v/v% hydrogen in air.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Thermoelectric Materials and Devices · Thermal Radiation and Cooling Technologies · Advanced Thermodynamics and Statistical Mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (12)
Show source-provided references
1. S.B. Schaevitz, A.J. Franz, K.F. Jensen, and M.A. Schmidt, Proc. 11th Int. Conf. Solid-State Sensors and Actuators (2001), pp. 30–33.
2. J. Vican, B.F. Gajdecko, F.L. Dryer, D.L. Milius, I.A. Aksay, and R.A. Yetter, Proceedings of the Combustion Institute, Vol. 29 (2002), pp. 909–916.
3. A.M. Karim a, J.A. Federici a, and D.G. Vlachos, J. Power Sources 179, 113 (2008).10.1016/j.jpowsour.2007.12.119 ↗
4. W. Shin, K. Tajima, Y. Choi, N. Izu, I. Matsubara, and N. Murayama, Sens. Actuators A 130–131, 411 (2006).10.1016/j.sna.2006.01.006 ↗
5. W. Shin, L.F. Houlet, M. Nishibori, N. Izu, T. Itoh, and I. Matsubara, Sens. Actuators B 139, 340 (2009).10.1016/j.snb.2009.03.032 ↗
6. M. Nishibori, W. Shin, K. Tajima, L.F. Houlet, N. Izu, T. Itoh, N. Murayama, and I. Matsubara, Jpn. J. Appl. Phys. 45, L1130 (2006).10.1143/JJAP.45.L1130 ↗
7. M. Takashiri, T. Shirakawa, K. Miyazaki, and H. Tsukamoto, Sens. Actuators A 138, 329 (2007).10.1016/j.sna.2007.05.030 ↗
8. H. Böttner, A. Schubert, K.H. Schlereth, D. Eberhard, A. Gavrikov, M. Jägle, G. Kühner, C. Künzel, J. Nurnus, and G. Plescher, J. Microelectromech. Syst. 13, 414 (2004).10.1109/JMEMS.2004.828740 ↗
9. D. Kim, E. Byon, G. Lee, and S. Cho, Thin Solid Films 510, 148 (2006).10.1016/j.tsf.2005.12.306 ↗
10. H. Obara, S. Higomo, M. Ohta, A. Yamamoto, K. Ueno, and T. Iida, Jpn. J. Appl. Phys. 48, 85506 (2009).10.1143/JJAP.48.085506 ↗
11. J.-P. Fleurial, G.J. Snyder, C.K. Huang, J. Herman, M.A. Ryan, N. Myung, and J. Whitacre, Proceedings of the Symposium on Micropower and Microdevices, 2002-25, Electrochemical Society (2002), p. 215.
12. W. Shin, M. Ishikawa, M. Nishibori, N. Izu, T. Itoh, and I. Matsubara, Mater. Trans. 50, 1596 (2009).10.2320/matertrans.E-M2009811 ↗