Synthesis of Doped ZnO Nanopowders Through Sucrose Protection Method and Its Use in Varistors Productions
Source abstract
Abstract
Doped ZnO nanopowders were successfully prepared by a novel wet-chemical method in the presence of sucrose and NH4NO3. Several analytic techniques such as x-ray diffraction, transmission electron microscopy and scanning electron microscope were used to make characterizations of the products. The results suggested that the doped ZnO powders were approximately spherical in shape with the diameter of the particles of about 25–45 nm. The as-synthesized powders were consolidated into dense varistors discs by compaction, sintering and evaluated for their electrical characteristics. Leakage current density was found to be about 0.93 μA/cm2, and non-linear coefficients as high as 46.5 and breakdown field of about 595.8 V/mm were measured. The experimental results showed the advantage of the addition of sucrose and NH4NO3 for controlling grain size and improving electrical performance of the varistors.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: ZnO doping and properties · Thin-Film Transistor Technologies · Gas Sensing Nanomaterials and Sensors
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (19)
Show source-provided references
1. T.N. Soitah, C.H. Yang, and S. Liang, Sci. Adv. Mater. 2, 534 (2010).10.1166/sam.2010.1120 ↗
2. D. Li and H. Haneda, Chemosphere 51, 129 (2003).10.1016/S0045-6535(02)00787-7 ↗
3. J.M. Wang and L. Gao, Inorg. Chem. Commun. 6, 877 (2003).10.1016/S1387-7003(03)00134-5 ↗
4. B.M. Keyes, L.M. Gedvilas, X. Li, and T.J. Coutts, J. Cryst. Growth 281, 297 (2005).10.1016/j.jcrysgro.2005.04.053 ↗
5. L.M. Levinson and H.R. Pilipp, Am. Ceram. Soc. Bull. 65, 639 (1986).
6. T.K. Gupta, J. Am. Ceram. Soc. 73, 1817 (1990).10.1111/j.1151-2916.1990.tb05232.x ↗
7. M.H. Wang and K.A. Hu, Mater. Chem. Phys. 100, 142 (2006).10.1016/j.matchemphys.2005.12.023 ↗
8. A. Aimable and M.T. Buscaglia, J. Eur. Ceram. Soc. 30, 591 (2010).10.1016/j.jeurceramsoc.2009.06.010 ↗
9. N.Q. Khanh and J. Volk, Mater. Lett. 79, 242 (2012).10.1016/j.matlet.2012.04.038 ↗
10. S. Cimitan and S. Albonetti, J. Colloid Interface Sci. 329, 73 (2009).10.1016/j.jcis.2008.09.060 ↗
11. Y. Wang and X.L. Zhang, Chem. Eng. J. 235, 191 (2014).10.1016/j.cej.2013.09.020 ↗
12. W. Onreabroy, N. Sirikulrat, and S.J. Milne, Solid State Ion. 177, 416 (2006).10.1016/j.ssi.2005.10.032 ↗
13. M. Vafaee and M.S. Ghamsari, Mater. Lett. 61, 3265 (2007).10.1016/j.matlet.2006.11.089 ↗
14. K. Hembram, D. Sivaprahasam, and T.N. Rao, J. Eur. Ceram. Soc. 31, 1905 (2011).10.1016/j.jeurceramsoc.2011.04.005 ↗
15. C.C. Wang and T.Y. Wu, Mater. Sci. Eng., B 111, 197 (2004).10.1016/j.mseb.2004.04.021 ↗
16. J. Wu, C. Xie, and Z. Bai, Mater. Sci. Eng. B 95, 157 (2002).10.1016/S0921-5107(02)00227-1 ↗
17. B.B. Straumal and S.G. Protasova, JEPT Letter. 97, 367 (2013).
18. M. Houabes and R. Metz, Ceram. Inter. 33, 1191 (2007).10.1016/j.ceramint.2006.04.004 ↗
19. M.H. Wang and X.Y. Ma, Mater. Lett. 61, 149 (2014).10.1016/j.matlet.2014.01.161 ↗