Failure Analysis of Board-Level Sn-Ag-Cu Solder Interconnections Under JEDEC Standard Drop Test
Source abstract
Abstract
This work investigates the board-level drop reliability of printed circuit boards (PCBs) assembled using three chip-size packages subjected to Joint Electron Device Engineering Council (JEDEC) standard drop test condition B. The acceleration and dynamic strain responses at several locations of the board-level package in the time and frequency domain are comprehensively investigated. The results in the time domain suggest that the dynamic response of the board-level package has two phases: forced vibration and free vibration. The maximum response occurs at the first half free vibration cycle. The acceleration response at the center of the PCB is larger than at the edges, whereas the dynamic strain response is just the opposite. The results in the frequency domain show that the first mode is fundamental. In addition, failure analysis is performed using the dye-and-pry test and cross-section test, suggesting that the brittle cracking occurs at the layer between the integrated circuit (IC) pad and the solder, not only through intermetallic compound (IMC) but also along the surface between the IC pad and IMC.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Electronic Packaging and Soldering Technologies · 3D IC and TSV technologies · Integrated Circuits and Semiconductor Failure Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (27)
Show source-provided references
1. D.Y.R. Chong, F.X. Che, J.H.L. Pang, K. Ng, J.Y.N. Tan, and P.T.H. Low, Microelectron. Reliab. 46, 1160–1171 (2006).10.1016/j.microrel.2005.10.011 ↗
2. S. Liu, X.J. Wang, B. Ma, Z.Y. Gan, and H.H. Zhang, 6th International Conference on Electronics Packaging Technology (2005).
3. C.T. Lim and Y.J. Low, Proceedings—Electronic Components and Technology Conference (2003), pp. 113–120.
4. JEDEC standard JESD22-B110A. Subassembly Mechanical Shock Test.
5. JEDEC standard JESD22-B111. Board Level Drop Test Method of Components for Handheld Electronic Products.
6. E.H. Wong and Y.W. Mai, Microelectron. Reliab. 46, 930–938 (2006).10.1016/j.microrel.2005.07.114 ↗
7. E.H. Wong, Y.W. Mai, S.K.W. Seah, K.M. Lim, and T.B. Lim, Proceedings—IEEE 56th Electronic Components and Technology Conference (2006), pp. 1808–1815.
8. E. Suhir, J. Electron. Packag. Trans. ASME 124, 170–177 (2002).
9. R.S. Chen, H.E. Cheng, R.W. Wu, C.H. Huang, W.C. Liao, and J.H. Chuang, Proc. Inst. Mech. Eng. 225, 2775–2791 (2011).
10. C.-L. Yeh and Y.-S. Lai, Microelectron. Reliab. 46, 626–636 (2006).10.1016/j.microrel.2004.12.021 ↗
11. Y. Gu and D. Jin, Proceedings—IEEE 56th Electronic Components and Technology Conference (2006), pp. 422–427.
12. Y.-S. Lai, C.L. Yeh, and C.C. Wang, Microelectron. Eng. 84, 87–94 (2007).10.1016/j.mee.2006.08.009 ↗
13. T.Y. Tee and H.S. Ng, Microelectron. Reliab. 44, 1131–1142 (2004).10.1016/j.microrel.2004.03.005 ↗
14. J.E. Luan, T.Y. Tee, E. Pek, C.T. Lim, Z. Zhong, and J. Zhou, IEEE Trans. Compon. Packag. Technol. 29, 449–456 (2006).10.1109/TCAPT.2006.880455 ↗
15. L. Zhu and W. Marcinkiewicz, IEEE Trans. Compon. Packag. Technol. 28, 449–456 (2005).10.1109/TCAPT.2005.853591 ↗
16. D.Y.R. Chong and F.X. Che, Microelectron. Reliab. 46, 1160–1171 (2006).10.1016/j.microrel.2005.10.011 ↗
17. Y.S. Lai, P.F. Yang, and C.L. Yeh, Microelectron. Reliab. 46, 645–650 (2006).10.1016/j.microrel.2005.07.005 ↗
18. D.K. Shin, D.Y. Lee, E.C. Ahn, T.H. Kim, and T.J. Cho, Proceedings—IEEE 56th Electronic Components and Technology Conference (2006), pp. 377–382.
19. J.E. Luan, T.Y. Tee, E. Pek, C.T. Lim, and Z. Zhong, Microelectron. Reliab. 47, 450–460 (2007).10.1016/j.microrel.2006.05.012 ↗
20. J. Varghese and A. Dasgupta, Microelectron. Reliab. 47, 93–103 (2007).10.1016/j.microrel.2006.02.002 ↗
21. T.-Y. Tsai, C.L. Yeh, Y.S. Lai, and R.S. Chen, Microelectron. Reliab. 47, 1239–1245 (2007).10.1016/j.microrel.2006.07.096 ↗
22. C.-L. Yeh, T.Y. Tsai, and Y.S. Lai, Microelectron. Reliab. 47, 2188–2196 (2007).10.1016/j.microrel.2006.09.040 ↗
23. J.E. Luan, T.Y. Tee, E. Pek, C.T. Lim, and Z.W. Zhong, Proceedings of the 5th Electronics Packaging Technology Conference (Singapore, 2003), pp. 233–243.10.1109/EPTC.2003.1271522 ↗
24. B. Zhang, H. Ding, and X.J. Sheng, Microelectron. Eng. 85, 610–620 (2008).10.1016/j.mee.2007.11.008 ↗
25. T.C. Chai, S. Quek, W.Y. Hnin, E.H. Wong, J. Chia, Y.Y. Wang, Y.M. Tan, C.T. Lim, IEEE 55th Electronic Components and Technology Conference (2005), pp. 630–636.
26. T.T. Mattila, P. Marjamäki, and J.K. Kivilahti, IEEE Trans. Compon. Packag. Technol. 29, 787–795 (2006).10.1109/TCAPT.2006.885948 ↗
27. J.F. Zhao and L.J. Garner, IEEE 56th Electronic Components and Technology Conference (San Diego, 2006), pp. 436–442.