Interfacial Reactions and Mechanical Properties of Bi-x wt.%Sn/Cu Joints (x = 2, 5, 10)
Source abstract
Abstract
Bi-x wt.%Sn alloys (x = 2, 5, 10) were joined with Cu substrates and reacted at 300°C to investigate the interfacial reactions between molten high-Bi alloys and Cu. Only one intermetallic compound, Cu3Sn, was formed at the interface for all alloy compositions. The Cu3Sn phase did not adhere to the Cu substrate but instead detached from it. A Bi-rich layer was formed in between the Cu3Sn phase and the Cu substrate as a result of interdiffusion of Bi and Cu through the Cu3Sn phase. The formation of only the Cu3Sn phase in the high-Bi alloy/Cu joints and a complicated interfacial microstructure are well explained using the Bi-Sn-Cu isothermal section. Mechanical tests indicated that the shear strength of the high-Bi alloy/Cu joints was comparable to that of the Pb-5 wt.%Sn/Cu joint, and fractures occurred partly along the high-Bi alloy/Cu3Sn interface and partly within the high-Bi alloy.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Electronic Packaging and Soldering Technologies · Metallurgical and Alloy Processes · Intermetallics and Advanced Alloy Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (18)
Show source-provided references
1. L.F. Miller, IBM J. Res. Dev. 13, 239 (1969).10.1147/rd.133.0239 ↗
2. P.A. Totta and R.P. Sopher, IBM J. Res. Dev. 13, 226 (1969).10.1147/rd.133.0226 ↗
3. J.W. Jang, L.N. Ramanathan, J.K. Lin, and D.R. Frear, J. Appl. Phys. 95, 8286 (2004).10.1063/1.1739530 ↗
4. K.Z. Wang and C.M. Chen, J. Electron. Mater. 34, 1543 (2005).10.1007/s11664-005-0163-9 ↗
5. C.M. Chen, K.J. Wang, and K.C. Chen, J. Alloys Compd. 432, 122 (2007).10.1016/j.jallcom.2006.05.116 ↗
6. M.H. Tsai, Y.W. Lin, H.Y. Chuang, and C.R. Kao, J. Mater. Res. 24, 3407 (2009).10.1557/jmr.2009.0398 ↗
7. M.H. Tsai, W.M. Chen, M.Y. Tsai, and C.R. Kao, J. Alloys Compd. 504, 341 (2010).10.1016/j.jallcom.2010.05.139 ↗
8. K.N. Tu and K. Zeng, Mater. Sci. Eng. R 34, 1 (2001).10.1016/S0927-796X(01)00029-8 ↗
9. G.Z. Pan, A.A. Liu, H.K. Kim, K.N. Tu, and P.A. Totta, Appl. Phys. Lett. 71, 2946 (1997).10.1063/1.120224 ↗
10. J.W. Jang, P.G. Kim, K.N. Tu, and M. Lee, J. Mater. Res. 14, 3895 (1999).10.1557/JMR.1999.0527 ↗
11. M. Inaba, K. Yamakawa, and N. Iwase, IEEE Trans. Comp. Hyb. Manuf. Technol. 13, 119 (1990).10.1109/33.52858 ↗
12. K.L. Lin and J.M. Jang, Mater. Chem. Phys. 38, 33 (1994).10.1016/0254-0584(94)90142-2 ↗
13. C.P. Lin, C.M. Chen, Y.W. Yen, H.J. Wu, and S.W. Chen, J. Alloys Compd. 509, 3509 (2011).10.1016/j.jallcom.2010.12.135 ↗
14. C.M. Chen and S.W. Chen, Acta Mater. 50, 2461 (2002).10.1016/S1359-6454(02)00076-9 ↗
15. C.M. Chen and S.W. Chen, J. Appl. Phys. 90, 1208 (2001).10.1063/1.1380219 ↗
16. T.B. Massalski, eds., Binary Alloy Phase Diagrams, Vol. 1 (Materials Park, OH: ASM Intl, 1990), p. 796.
17. K. Zeng and J.K. Kivilahti, J. Electron. Mater. 30, 35 (2001).10.1007/s11664-001-0212-y ↗
18. F.N. Rhines, Phase Diagrams in Metallurgy: Their Development and Application (New York: McGraw-Hill Book, 1956), p. 156.