journal article·2019-02

Low-Temperature Cu-Cu Bonding Process Based on the Sn-Cu Multilayer and Self-Propagating Reaction Joining

Jinhu Fan, Tielin Shi, Zirong Tang, Bo Gong, Junjie Li, Jie Huang, Tianxiang Li

Journal of Electronic Materials· Volume 48· Issue 2
Publisher page

Abstract

Transient liquid phase bonding can be realized at a relatively low temperature through building an intermetallic interconnection. A self-propagating reaction joint can achieve a low temperature bond by confining the heat at the bonding interface and reduce the thermal effect on other components. In this work, a Sn-Cu alternating multilayer was combined with an Al-Ni self-propagating reaction joint to develop a highly efficient low-temperature Cu-Cu hybrid bonding process. The Sn-Cu alternating multilayer was directly prepared on the Cu substrates by an alternating electroplating process. The Al-Ni multilayer film was sandwiched between two Cu substrates under a pressure of 5 MPa and ignited with a 15-V spark at room temperature. Cu-Cu bonds with three different Sn/Cu thickness ratios were studied. It was found that the Cu6Sn5 layer within the three Sn layers had different thicknesses and decreased with increasing distance from the heat source of the Al-Ni nanofoil. The thickness difference between adjacent Cu6Sn5 layers at first decreased with the increasing Sn/Cu thickness ratio in these three groups and then remained constant. The shear strength of the bonds varied with the thickness of Cu6Sn5 layer and achieved a high shear strength with a Sn/Cu thickness ratio of 1.6 μm/1 μm, where fracture occurred within the Cu6Sn5 layer near the Cu substrate. The combination of the Sn-Cu multilayer and self-propagating reaction joining process can achieve a good low-temperature bond between Cu substrates with an optimized Sn/Cu thickness ratio, which has a strong influence on the quality of bonds, the Cu6Sn5 morphology, and shear strength.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Electronic Packaging and Soldering Technologies · 3D IC and TSV technologies · Advanced Welding Techniques Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (51)

Show source-provided references
1. C.T. Ko and K.N. Chen, Microelectron. Reliab. 52, 302 (2012).10.1016/j.microrel.2011.03.038 ↗
2. C.S. Tan, L. Peng, J. Fan, H. Li, and S. Gao, IEEE Trans. Device Mater. Reliab. 12, 194 (2012).10.1109/TDMR.2012.2188802 ↗
3. S.E. Kim, Microelectron. Eng. 137, 158 (2015).10.1016/j.mee.2014.12.012 ↗
4. K.E. Aasmundtveit, T.A. Tollefsen, T.T. Luu, A. Duan, K. Wang, and N. Hoivik, in EMPC Proceedings (2013), pp. 1–6
5. H.A. Yang, M.C. Wu, and W.L. Fang, J. Micromech. Microeng. 15, 394 (2005).10.1088/0960-1317/15/2/020 ↗
6. D.Q. Yua, C.K. Lee, L.L. Yan, M.L. Thew, and J.H. Lau, J. Alloys Compd. 485, 444 (2009).10.1016/j.jallcom.2009.05.136 ↗
7. J. Fana, D.F. Lim, L. Peng, K.H. Li, and C.S. Tan, Electrochem. Solid State Lett. 14, 470 (2011).10.1149/2.025111esl ↗
8. O.A. Ojo, O.A. Olatunji, and M.C. Chaturvedi, Philos. Mag. Lett. 97, 419 (2017).10.1080/09500839.2017.1396373 ↗
9. A.H.M.E. Rahman and M.N. Cavalli, Mater. Sci. Eng. A 545, 6 (2012).10.1016/j.msea.2012.02.020 ↗
10. G.O. Iii Cook and C.D. Sorensen, J. Mater. Sci. 46, 5305 (2011).10.1007/s10853-011-5561-1 ↗
11. A.N. AlHazaa, M.A. Shar, A.M. Atieh, and H. Nishikawa, Metals 8, 60 (2018).10.3390/met8010060 ↗
12. W.C. Welch and K. Najafi, in Transducers’ Conference Proceedings (2007), pp. 1327–1328.
13. O.A. Ojo and O. Aina, Metall. Mater. Trans. A 49, 1481 (2018).10.1007/s11661-018-4572-9 ↗
14. W.F. Gale and D.A. Butts. (2004) https://doi.org/10.1179/13621710422502172410.1179/136217104225021724 ↗
15. M. Brincker, S. Söhl, R. Eisele, and V.N. Popok, J. Microelectron. Relia. 76, 378 (2017).10.1016/j.microrel.2017.06.041 ↗
16. W.C. Welch and K. Najafi, in TRANSDUCERS Conference Proceedings (2005), pp. 1327–1328
17. N.S. Nobeen, R. Imade, B.H. Lee, E.J.R. Phua, C.C. Wong, C.L. Gan, and Z. Chen, in EPTC Proceedings (2013), pp. 647–652
18. T.H. Wang, H. Lee, C.M. Chen, M.G. Chen, C.C. Hu, Y.J. Chen, and R.H. Horng, Microelectron. Reliab. 63, 68 (2016).10.1016/j.microrel.2016.06.012 ↗
19. T.A. Tollefsen, A. Larsson, O.M. Løvvik, and K. Aasmundtveit, Metall. Mater. Trans. B 43, 397 (2012).10.1007/s11663-011-9609-z ↗
20. K.N. Tu, Solder Bond Technology: Materials, Properties, and Reliability (New York: Springer, 2007), pp. 111–113.10.1007/978-0-387-38892-2_4 ↗
21. N. Hoivik, K. Wang, K. Aasmundtveit, G. Salomonsenl, A. Lapadatu, G. Kittilsland, and B. Stark, in ESTC Proceedings (2010), pp. 1–5
22. S. Lemettre, S. Seok, N. Isac, J. Moulin, and A. Bosseboeuf, Microsyst. Technol. 23, 3893 (2017).10.1007/s00542-015-2784-0 ↗
23. F. Brem, C. Liu, and D. Raik, in ECTC Proceedings (2012), pp. 1–5
24. S. Bader, W. Gust, and H. Hieber, Acta Metal. Mater. 43, 329 (1995).
25. K.E. Aasmundtveit, T.T. Luu, A. S. B. Vardøy, T.A. Tollefsen, K. Wang, and N. Hoivik, in ESTC Proceedings (2014), pp. 1–6
26. B.S. Lee, S.K. Hyun, and J.W. Yoon, J. Mater. Sci. Mater. Electron. 28, 7827 (2017).10.1007/s10854-017-6479-4 ↗
27. S. Marauska, M. Claus, T. Lisec, and B. Wagner, Microsyst. Technol. 19, 1119 (2012).10.1007/s00542-012-1708-5 ↗
28. M. Yang, Y. Cao, S. Joo, H.T. Chen, X. Ma, and M.Y. Li, J. Alloys Compd. 582, 688 (2014).10.1016/j.jallcom.2013.08.013 ↗
29. A.Z.M.S. Rahman, P.Y. Chia, and A. Haseeb, Mater. Lett. 147, 50 (2015).10.1016/j.matlet.2015.01.127 ↗
30. T.T. Luu, A. Duan, K.E. Aasmundtveit, and N. Hoivik, J. Electron. Mater. 42, 3582 (2013).10.1007/s11664-013-2711-z ↗
31. H. Liu, K. Wang, K.E. Aasmundtveit, and N. Hoivik, J. Electron. Mater. 41, 2453 (2012).10.1007/s11664-012-2060-3 ↗
32. M. Brincker, S. Söhl, R. Eisele, and V.N. Popok, Microelectron. Reliab. 76, 378 (2017).10.1016/j.microrel.2017.06.041 ↗
33. A. Duan, T.T. Luu, K. Wang, K. Aasmundtveit, and N. Hoivik, J. Micromech. Microeng. 25, 097001 (2015).10.1088/0960-1317/25/9/097001 ↗
34. F. Song and S.W.R. Lee, in ECTC Proceedings (2006), pp. 1196–2003
35. T.C. Huang, V. Smet, and S. Kawamoto, in ECTC Proceedings (2015), pp. 1377–1384
36. C. Flötgen, M. Pawlak, E. Pabo, H.J. van de Wiel, G.R. Hayes, and V. Dragoi. (2013) https://doi.org/10.1117/12.2017350 .10.1117/12.2017350 ↗
37. N.S. Bosco and F.W. Zok, Acta Mater. 52, 2965 (2004).
38. P.Y. Chia, A.S.M.A. Haseeb, and S.H. Mannan, Materials 9, 430 (2016).10.3390/ma9060430 ↗
39. M.K. Faiz, K. Bansho, T. Suga, T. Miyashita, and M. Yoshida, J. Mater. Sci. Mater. Electron. 28, 16433 (2017).10.1007/s10854-017-7554-6 ↗
40. M. Char and A. Kar, Nanotechnol. Lett. 2, 1 (2018).10.32829/nanoj.v2i1.44 ↗
41. C. Honrao, T.C. Huang, M. Kobayashi, V. Smet, P.M. Raj, and R. Tummala, in ECTC Proceedings (2014), pp. 1160–1165
42. R. An, H. Ma, H. Li, Z. Zheng, and C.Q. Wang, in EPTC Proceedings (2014), pp. 980–984
43. X. Qiu and J. Wang, Sens. Actuator A-Phys. 141, 476 (2008).10.1016/j.sna.2007.10.039 ↗
44. D.P. Adams, Thin Solid Films 644, 589 (2015).
45. J. Wang, E. Besnoin, A. Duckham, O.M. Knio, M. Powers, M. Whitener, and T.P. Weihs, Appl. Phys. Lett. 83, 3987 (2003).10.1063/1.1623943 ↗
46. N.A. Manesh, K.R. Coffey, and R. Kumar, in IMECE Conference Proceedings (2007), pp. 1189–1197
47. B. Boettge, F. Schippela, F. Naumann, L. Bertholda, G. Lorenza, R. Gerbacha, J. Bagdahnc, and M. Petzolda, ECS Trans. 50, 215 (2013).10.1149/05007.0215ecst ↗
48. J. Braeuer and T. Gessner, J. Micromech. Microeng. 24, 115002 (2014).10.1088/0960-1317/24/11/115002 ↗
49. W.B. Zhu, F.S. Wu, B.H. Wang, E. Hou, P. Wang, C.Q. Liu, and W.S. Xia, J. Micromech. Microeng. 128, 24 (2014).
50. J.H. Fan, T.L. Shi, X.X. Tao, T.Y. Zhou, J.J. Li, Z.R. Tang, G.L. Liao, and X. Yu, J. Alloys Compd. 735, 1189 (2017).10.1016/j.jallcom.2017.11.265 ↗
51. S. Fukumoto, A. Tanaka, M. Matsushima, and K. Fujimoto, in National Meeting of Japan Welding Society Proceeding (2010), pp. 48–48