Room Temperature Bonding on Interface Between Metal and Ceramic
Source abstract
Abstract
The influence of surface activated bonding (SAB) on adhesion strength between a metal and ceramic including Al/AlN and Cu/AlN is investigated. Plasma pre-treatments can significantly increase the adhesion strength between the metal and ceramic through surface activation, which can enlarge the contact area between metal and ceramic. Bonding pressure is also an important factor to improve the adhesion between metal and ceramic during SAB. Successful bonding between the metal and ceramic via SAB can be attributed to the formation of the interface layer where plastic deformation and rearrangement of metal to the ceramic occurs, which improves the atomic scale interconnection between the metal and ceramic. In this study, the influence of experimental SAB conditions for processing such as plasma power, degree of vacuum and bonding pressure on adhesion strength is investigated. Also, the thermal conduction of metal/ceramic laminates is discussed for its potential application as a heat spreader of LED chips.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Electronic Packaging and Soldering Technologies · 3D IC and TSV technologies · Advanced ceramic materials synthesis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (36)
Show source-provided references
1. H.H. Cheng, D.S. Huang, and M.T. Lin, Microelectron. Reliab. 52, 905 (2012).10.1016/j.microrel.2011.05.009 ↗
2. X. Luo, R. Hu, S. Liu, and K. Wang, Prog. Energy Combust. Sci. 56, 1 (2016).10.1016/j.pecs.2016.05.003 ↗
3. R. Vairavan, Z. Sauli, V. Retnasamy, and H. Kamarudin, AEB 7, 3634 (2013).
4. N. Narendran, Y. Gu, J.P. Freyssinier, H. Yu, and L. Deng, J. Cryst. Growth 268, 449 (2004).10.1016/j.jcrysgro.2004.04.071 ↗
5. N. Narendran and Y. Gu, J. Disp. Technol. 1, 167 (2005).10.1109/JDT.2005.852510 ↗
6. T. Tamura, T. Setomoto, and T. Taguchi, J. Lumin. 87, 1180 (2000).10.1016/S0022-2313(99)00588-8 ↗
7. E. Hong and N. Narendran, in SPIE Conference Proceedings (2004), pp. 93–99.
8. H.H. Kim, S.H. Choi, S.H. Shin, Y.K. Lee, S.M. Choi, and S. Yi, Microelectron. Reliab. 48, 444 (2008).
9. A. Christensen and S. Graham, Appl. Therm. Eng. 29, 364 (2009).10.1016/j.applthermaleng.2008.03.019 ↗
10. B.J. Huang, C.W. Tang, and M.S. Wu, Appl. Therm. Eng. 29, 609 (2009).10.1016/j.applthermaleng.2008.03.038 ↗
11. S. Nakamura, T. Mukai, and M. Senoh, Appl. Phys. Lett. 64, 1687 (1994).10.1063/1.111832 ↗
12. R. Könenkamp, R.C. Word, and C. Schlege, Appl. Phys. Lett. 85, 6004 (2004).10.1063/1.1836873 ↗
13. R.R. Tummala, E.J. Rymaszewski, and A.G. Klopfenstein, Microelectronics Packaging Handbook: Subsystem Packaging, Part 3, 3rd ed. (Dordrecht: Kluwer, 2001), pp. 85–86.
14. C.I. Nicholls and H.M. Rosenberg, J. Phys. C 17, 1165 (1984).10.1088/0022-3719/17/7/011 ↗
15. J.K. Kim, J.W. Kim, M.I. Kim, and M.S. Song, Macromol. Res. 14, 517 (2006).10.1007/BF03218718 ↗
16. M. Hussain, Y. Oku, A. Nakahira, and K. Niihara, Mater. Lett. 26, 177 (1996).10.1016/0167-577X(95)00223-5 ↗
17. P. Bujard, G. Kühlein, S. Ino, and T. Shiobara, in ECTC Conference Proceedings (1994), pp. 527–532.
18. Y. Xu, D.D.L. Chung, and C. Mroz, Compos. Part A. Appl. Sci. Manuf. 32, 1749 (2001).10.1016/S1359-835X(01)00023-9 ↗
19. W. Kim, J.W. Bae, I.D. Choi, and Y.S. Kim, Polym. Eng. Sci. 39, 756 (1999).10.1002/pen.11464 ↗
20. A. Abed, I.S. Jalham, and A. Hendry, J. Eur. Ceram. Soc. 21, 283 (2001).10.1016/S0955-2219(00)00211-9 ↗
21. K.S. Lee, KSME Int. J 17, 1928 (2003).10.1007/BF02982432 ↗
22. M. Entezarian and R.A.L. Drew, Mater. Sci. Eng. A 212, 206 (1996).10.1016/0921-5093(96)10190-8 ↗
23. J.S. Pimenta, A.J.A. Buschinelli, R.M.D. Nascimento, A.E. Martinelli, and J. Remmel, J. Braz. Soc. Mech. Sci. Eng. 32, 468 (2010).10.1590/S1678-58782010000400009 ↗
24. A.K. Jadoon, B. Ralph, and P.R. Hornsby, J. Mater. Process. Technol. 152, 257 (2004).10.1016/j.jmatprotec.2003.10.005 ↗
25. J. Cao, J. Liu, X. Song, X. Lin, and J. Feng, Mater. Des. 56, 115 (2014).10.1016/j.matdes.2013.10.074 ↗
26. T. Suga, K. Miyazawa, and Y. Takakashi, J. Jpn. Inst. Met. 54, 935 (1990).
27. T. Akatsu, N. Hosoda, T. Suga, and M. Ruhle, Mater. Sci. Forum 329, 294 (1999).
28. T. Suga, in LTB-3D Conference Proceedings (2012), pp. 7–10.
29. M.M.R. Howlader, F. Zhang, M.J. Deen, and T. Suga, J. Vac. Sci. Technol. A 29, 021007 (2011).10.1116/1.3549114 ↗
30. C.J.H. Helmereich, R. Corbin, and S.M. McDeavitt, J. Nucl. Mater. 446, 100 (2014).10.1016/j.jnucmat.2013.10.063 ↗
31. A. Poppe and C.J. Lasance, in SEMI-THERM Conference Proceedings (2009), pp. 151–158.
32. T. Akatsu, N. Hosoda, T. Suga, and M. Rühle, Mater. Sci. Forum 329, 294 (1999).
33. T. Akatsu, N. Hosoda, T. Suga, and M. Rühle, J. Mater. Sci. 34, 4133 (1999).10.1023/A:1004661610307 ↗
34. T.H. Kim, M.M.R. Howlader, T. Itoh, and T. Suga, J. Vac. Sci. Technol. A 21, 449 (2003).10.1116/1.1537716 ↗
35. H. Chen, H. Wei, M. Chen, F. Meng, H. Li, and Q. Li, Appl. Surf. Sci. 283, 525 (2013).10.1016/j.apsusc.2013.06.139 ↗
36. F. Meydaneri, B. Saatçi, M. Gündüz, and M. Özdemir, Continuum Mech. Thermodyn. 25, 691 (2013).10.1007/s00161-012-0263-8 ↗