Lead-Free Sn-Ce-O Composite Coating on Cu Produced by Pulse Electrodeposition from an Aqueous Acidic Sulfate Electrolyte
Source abstract
Abstract
Pulse-electrodeposited Sn-Ce-O composite solder coatings were synthesized on a Cu substrate from an aqueous acidic solution containing stannous sulfate (SnSO4·3H2O), sulfuric acid (H2SO4), and Triton X-100 as an additive. The codeposition was achieved by adding nano-cerium oxide powder in varying concentrations from 5 g/L to 20 g/L into the electrolytic bath. Microstructural characterization was carried out using x-ray diffraction (XRD), scanning electron microscopy, and transmission electron microscopy. The XRD analysis showed that the deposits consist mainly of tetragonal β (Sn) with reduced cerium oxide species. The composite coatings thus obtained exhibit a smaller grain size, possess higher microhardness, and a lower melting point than the monolithic Sn coating. The electrical resistivity of the developed composites increases, however, but lies within the permissible limits for current lead-free solder applications. Also, an optimum balance of properties in terms of microhardness, adhesion, melting point and resistivity can be obtained with 0.9 wt.% cerium oxide in the Sn matrix, which enables potential applications in solder joints and packaging.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Electrodeposition and Electroless Coatings · Electronic Packaging and Soldering Technologies · Semiconductor materials and interfaces
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (49)
Show source-provided references
1. M. Abtew and G. Selvaduray, Mater. Sci. Eng., R 27, 95 (2000).10.1016/S0927-796X(00)00010-3 ↗
2. K.J. Puttlitz and K.A. Stalter, Handbook of Lead Free Solder Technology for Microelectronic Assemblies, 1st ed. (New York: Marcel Dekker, 2004).10.1201/9780203021484 ↗
3. K. Suganuma, Curr. Opin. Solid St. Mater. Sci. 5, 55 (2001).10.1016/S1359-0286(00)00036-X ↗
4. F. Guo, Composite lead-free electronic solders, Lead Free Electronic Solders, ed. K.N. Subramanian (New York: Springer, 2007), p. 129.10.1007/978-0-387-48433-4_8 ↗
5. K. Zeng and K.N. Tu, Mater. Sci. Eng. R 38, 55 (2002).10.1016/S0927-796X(02)00007-4 ↗
6. T.Y. Lee, W.J. Choi, K.N. Tu, J.W. Jang, S.M. Kuo, J.K. Lin, D.R. Frear, K. Zeng, and J.K. Kivilahti, J. Mater. Res. 17, 291 (2002).10.1557/JMR.2002.0042 ↗
7. Y.S. Ki, J.M. Kim, and Y.E. Shin, JWJ 21, 92 (2003).
8. J.H. Park, H.Y. Lee, J.H. Jhun, C.S. Cheon, and J.P. Jung, JWJ 26, 43 (2008).
9. J.W. Moon, M.I. Kim, and J.P. Jung, JWJ 20, 99 (2002).
10. F. Guo, J. Mater. Sci.: Mater. Electron. 18, 129 (2007).
11. A. Lee and K.N. Subhramanian, J. Mater. Sci. 34, 1399 (2005).
12. J. Shen and Y.C. Chan, Microelectron. Reliab. 49, 223 (2009).10.1016/j.microrel.2008.10.004 ↗
13. A. Sharma, D.E. Xu, J. Chow, M. Mayer, H.R. Sohn, and J.P. Jung, Electron. Mater. Lett. 11, 1072 (2015).10.1007/s13391-015-4454-x ↗
14. X.L. Zhong and M. Gupta, J. Phys. D Appl. Phys. 41, 095403 (2008).10.1088/0022-3727/41/9/095403 ↗
15. P. Liu, P. Yao, and J. Liu, J. Electron. Mater. 37, 874 (2008).10.1007/s11664-007-0366-3 ↗
16. J. Wei, S.M.L. Nai, C.K. Wong, and M. Gupta, SIMTech Technical Reports 6, 29 (2005).
17. A.K. Gain, Y.C. Chan, and W.K.C. Yung, Microelectron. Reliab. 51, 2306 (2011).10.1016/j.microrel.2011.03.042 ↗
18. X. Liu, M. Huang, C.M.L. Wu, and L. Wang, J. Mater. Sci.: Mater. Electron. 21, 1046 (2010).
19. P. Babaghorbani, S.M.L. Nai, and M. Gupta, J. Mater. Sci.: Mater. Electron. 20, 571 (2009).
20. A. Fawzy, S.A. Fayek, M. Sobhy, E. Nassr, M.M. Mousa, and G. Saad, J. Mater. Sci.: Mater. Electron. 24, 3210 (2013).
21. M.A.A. Mohd Salleh, A.B. Mustafa, H. Kamarudin, M. Bnhussain, M.H. Zan Hazizi, and F. Somidin, Phys. Procedia 22, 299 (2011).10.1016/j.phpro.2011.11.047 ↗
22. A. Sharma, A, B.G. Baek, and J.P. Jung. Mater. Des. 87, 370 (2015).10.1016/j.matdes.2015.07.137 ↗
23. A. Sharma, S. Bhattacharya, S. Das, H.J. Fecht, and K. Das, J. Alloy. Compd. 574, 609 (2013).10.1016/j.jallcom.2013.06.023 ↗
24. A. Sharma, S. Bhattacharya, S. Das, and K. Das, Metall. Mater. Trans. A 44A, 5587 (2013).10.1007/s11661-013-1894-5 ↗
25. S. Bhattacharya, A. Sharma, S. Das, and K. Das, Metall. Mater. Trans. A 47A, 1292 (2016).10.1007/s11661-015-3313-6 ↗
26. A.P. Schuetze, W. Lewis, C. Brown, and W.J. Geerts, Am. J. Phys. 72, 149 (2004).10.1119/1.1629085 ↗
27. J.H. Bickford and S. Nassar, Handbook of Bolts and Bolted Joints (New York: Marcel Dekker, 1998), pp. 84–86.10.1201/9781482273786 ↗
28. JCPDS File No. 04-0673-Sn PCPDF, International Center for Diffraction Data, 12 Campus Blvd., Newtown Square, PA 19073-3273 USA.
29. T. Subramanian, J. Shan, W. Huang, S. Raghavan, R. Small, C. Shang, and B. Scott, in MRS Proceedings (2003), pp. 161–166. doi: 10.1557/PROC-767-F3.3 .10.1557/PROC-767-F3.3 ↗
30. J.Y. Kim, S.K. Kim, U. Paik, T. Katoh, and J.G. Park, JKPS 41, 413 (2002).
31. F. Zhang, P. Wang, J. Koberstein, S. Khalid, and S.W. Chan, Surf. Sci. 563, 74 (2004).10.1016/j.susc.2004.05.138 ↗
32. S. Fabris, G. Vicario, G. Balducci, S. de Gironcoli, and S. Baroni, J. Phys. Chem. B 109, 22860 (2005).10.1021/jp0511698 ↗
33. K. Masek, M. Vaclavu, P. Babor, and V. Matolın, Appl. Surf. Sci. 255, 6656 (2009).10.1016/j.apsusc.2009.02.080 ↗
34. M. Skoda, M. Cabala, V. Chab, K.C. Prince, L. Sedlacek, T. Skala, F. Sutara, and V. Matolın, Appl. Surf. Sci. 254, 4375 (2008).10.1016/j.apsusc.2008.01.080 ↗
35. V. Matolin, M. Cabala, V. Chab, I. Matolínova, K.C. Prince, M. Skoda, F. Sutara, T. Skala, and K. Veltrusk, Surf. Interface Anal. 40, 225 (2008).10.1002/sia.2625 ↗
36. C.M.L. Wu, D.Q. Yu, C.M.T. Law, and L. Wang, Mater. Sci. Eng., R 44, 1 (2004).10.1016/j.mser.2004.01.001 ↗
37. W. Xiao, Q. Guo, and E.G. Wang, Chem. Phys. Lett. 368, 527 (2003).10.1016/S0009-2614(02)01889-4 ↗
38. B.F. Rivera, B.Y. Johnson, M.J. O’Keefe, and W.G. Fahrenholtz, Surf. Coat. Technol. 176, 349 (2004).10.1016/S0257-8972(03)00742-4 ↗
39. B.Y. Johnson, J. Edington, A. Williams, and M.J. O’Keefe, Mater. Charact. 54, 41 (2005).10.1016/j.matchar.2004.10.006 ↗
40. A. Sharma, S. Bhattacharya, S. Das, and K. Das, Metall. Mater. Trans. A 45A, 4610 (2014).10.1007/s11661-014-2389-8 ↗
41. A. Sharma, S. Das, and K. Das, Electrodeposition of Composite Materials, ed. A.M.A Mohamed (InTech, 2016). doi: 10.5772/62036 .10.5772/62036 ↗
42. Mitigation Strategies for Tin Whiskers, A Report prepared by M. Osterman CALCE-EPSC, 2002.
43. K.W. Moon, M.E. Williams, C.E. Johnson, G.R. Stafford, C.A. Handwerker, and W.J. Boettinger, in The Fourth Pacific Rim Conference on Advanced Materials and Processing Proceedings (2001), Honolulu, pp. 1115–1118.
44. A. Sharma, S. Bhattacharya, R. Sen, B.S.B. Reddy, and H.J. Fecht, Mater. Char. 68, 22 (2012).10.1016/j.matchar.2012.03.002 ↗
45. H. Baker, ASM Handbook, Vol. 3 (ASM International: Alloys Phase Diagrams, 1998).
46. Q.S. Mei and K. Lu, Prog. Mater Sci. 52, 1175 (2007).10.1016/j.pmatsci.2007.01.001 ↗
47. A.F. Mayadas and M. Shatzkes, Phys. Rev. B 1, 1382 (1970).10.1103/PhysRevB.1.1382 ↗
48. H. Jiménez, L. Gil, M.H. Staia, and E.S. Puchi-Cabrera, Surf. Coat. Technol. 202, 2072 (2008).10.1016/j.surfcoat.2007.08.071 ↗
49. S. Kuiry, Advanced Scratch Testing for Evaluation of Coatings, Tribology and Mechanical Testing, Bruker Nano Surfaces Division, USA.