Using Ge Secondary Phases to Enhance the Power Factor and Figure of Merit of Ge17Sb2Te20
Source abstract
Abstract
Thermoelectric materials are the leading candidate today for applications in solid-state waste-heat recovery/cooling applications. Research and engineering has pushed the ZT, and overall conversion efficiency, of these materials to values which can be deemed practical for commercialization. However, many of the state-of-the-art thermoelectric materials of today utilize elements which are toxic, such as Ag, Pb, Tl, and Cd. Alloys of GeTe and Sb2Te3 were first explored for their applications in phase-change memory, because of their ability to rapidly alternate between crystalline and amorphous phases. Recently, these materials have been identified as materials with ZT (S2T/ρκ, where S is the Seebeck coefficient, ρ is the electrical resistivity, T is the operating temperature, and κ is the thermal conductivity) much greater than unity. In this work, the influence of elemental Ge as a secondary phase on transport in Ge17Sb2Te20 was explored. It was found that Ge introduces an additional scattering mechanism, which leads to increased electrical resistivity, Seebeck coefficient, and power factor values as high as 36 μW cm−1 K−2. The thermal conductivity was slightly reduced and the ZT was enhanced across the entire temperature range of measurement, with peak values greater than 2.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Phase-change materials and chalcogenides · Advanced Thermoelectric Materials and Devices · Chalcogenide Semiconductor Thin Films
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (36)
Show source-provided references
1. T.M. Tritt and M.A. Subramanian, MRS Bull. 31, 188 (2006)10.1557/mrs2006.44 ↗
2. G.J. Snyder and E.S. Toberer, Nat. Mater. 7, 105 (2008)10.1038/nmat2090 ↗
3. R. Berman, Thermal Conduction in Solids (Oxford: Clarendon, 1976).
4. A. Dehkordi, M. Zebarjadi, J. He, and T. Tritt, Mater. Sci. Eng. R. 97, 1 (2015).
5. S.R. Ovshinsky, Phys. Rev. Lett. 21, 1450 (1968).10.1103/PhysRevLett.21.1450 ↗
6. S. Raoux, Annu. Rev. Mater. Res. 39, 25 (2009).
7. M. Wuttig and N. Yamada, Nat. Mater. 6, 824 (2007).10.1038/nmat2009 ↗
8. F. Jedema, Nat. Mater. 6, 90 (2007).10.1038/nmat1832 ↗
9. J.D. Koenig, H. Boettner, J. Tomforde, and W. Bensch, in 2007 26th International Conference on Thermoelectrics (IEEE, 2007), pp. 390–393.10.1109/ICT.2007.4569502 ↗
10. J.B. Williams, E. Lara-Curzio, E. Cakmak, T. Watkins, and D.T. Morelli, J. Mater. Res. 30, 2605 (2015).
11. M.N. Schneider, T. Rosenthal, C. Stiewe, and O. Oeckler, Z. Kristallogr. 225, 463 (2010).10.1524/zkri.2010.1320 ↗
12. M.N. Schneider, P. Urban, A. Leineweber, M. Döblinger, and O. Oeckler, Phys. Rev. B. 81, 184102 (2010).
13. T. Rosenthal, M.N. Schneider, C. Stiewe, M. Döblinger, and O. Oeckler, Chem. Mater. 23, 4349 (2011).10.1021/cm201717z ↗
14. S. Welzmiller, F. Fahrnbauer, F. Hennersdorf, S. Dittmann, M. Liebau, C. Fraunhofer, W.G. Zeier, G.J. Snyder, and O. Oeckler, Adv. Electron. Mater. 1, 1500266 (2015).
15. K.S. Siegert, F.R.L. Lange, E.R. Sittner, H. Volker, C. Schlockermann, T. Siegrist, and M. Wuttig, Rep. Prog. Phys. 78, 013001 (2015).10.1088/0034-4885/78/1/013001 ↗
16. F. Yan, T.J. Zhu, X.B. Zhao, and S.R. Dong, Appl. Phys. A Mater. Sci. Process. 88, 425 (2007).10.1007/s00339-007-4006-9 ↗
17. D.J. Bergman and O. Levy, J. Appl. Phys. 70, 6821 (1991).10.1063/1.349830 ↗
18. D.J. Bergman and L.G. Fel, J. Appl. Phys. 85, 8205 (1999).10.1063/1.370660 ↗
19. L.D. Hicks and M.S. Dresselhaus, Phys. Rev. B 47, 12727 (1993).10.1103/PhysRevB.47.12727 ↗
20. K. Biswas, J. He, I.D. Blum, C.-I. Wu, T.P. Hogan, D.N. Seidman, V.P. Dravid, and M.G. Kanatzidis, Nature 489, 414 (2012).10.1038/nature11439 ↗
21. G. Tan, F. Shi, S. Hao, L.-D. Zhao, H. Chi, X. Zhang, C. Uher, C. Wolverton, V.P. Dravid, and M.G. Kanatzidis, Nat. Commun. 7, 12167 (2016).10.1038/ncomms12167 ↗
22. Y. Luo, J. Yang, Q. Jiang, W. Li, D. Zhang, Z. Zhou, Y. Cheng, Y. Ren, and X. He, Adv. Energy Mater. 6, 1600007 (2016).
23. Y. Pei, A.F. May, and G.J. Snyder, Adv. Energy Mater. 1, 291 (2011).10.1002/aenm.201000072 ↗
24. J. Peng, L. Fu, Q. Liu, M. Liu, J. Yang, D. Hitchcock, M. Zhou, and J. He, J. Mater. Chem. A 2, 73 (2014).10.1039/C3TA13729E ↗
25. F. Fahrnbauer, S. Maier, M. Grundei, N. Giesbrecht, M. Nentwig, T. Rosenthal, G. Wagner, G.J. Snyder, and O. Oeckler, J. Mater. Chem. C 3, 10525 (2015).10.1039/C5TC01509J ↗
26. F. Fahrnbauer, D. Souchay, G. Wagner, and O. Oeckler, J. Am. Chem. Soc. 137, 12633 (2015).
27. W.J. Parker, R.J. Jenkins, C.P. Butler, and G.L. Abbott, J. Appl. Phys. 32, 1679 (1961).10.1063/1.1728417 ↗
28. M.N. Schneider, X. Biquard, C. Stiewe, T. Schröder, P. Urban, and O. Oeckler, Chem. Commun. 48, 2192 (2012).10.1039/C1CC15808B ↗
29. J.P. Heremans, C.M. Thrush, and D.T. Morelli, J. Appl. Phys. 98, 063703 (2005).10.1063/1.2037209 ↗
30. D.M. Rowe and G. Min, Thirteen. Int. Conf. Thermoelectr. 339, 339 (1995).
31. K. Nishio and T. Hirano, Jpn. J. Appl. Phys. Part 1 Regul. Pap. Br. Commun. Rev. Pap. 36, 170 (1997).10.1143/JJAP.36.170 ↗
32. S.N. Zhang, T.J. Zhu, S.H. Yang, C. Yu, and X.B. Zhao, J. Alloys Compd. 499, 215 (2010).10.1016/j.jallcom.2010.03.170 ↗
33. Z. Xiong, X. Chen, X. Huang, S. Bai, and L. Chen, Acta Mater. 58, 3995 (2010).10.1016/j.actamat.2010.03.025 ↗
34. T.H. Zou, X.Y. Qin, D. Li, G.L. Sun, Y.C. Dou, Q.Q. Wang, B.J. Ren, J. Zhang, H.X. Xin, and Y.Y. Li, Appl. Phys. Lett. 104, 013904 (2014).
35. Y. Zhang, J.H. Bahk, J. Lee, C.S. Birkel, M.L. Snedaker, D. Liu, H. Zeng, M. Moskovits, A. Shakouri, and G.D. Stucky, Adv. Mater. 26, 2755 (2014).10.1002/adma.201304419 ↗
36. J.H. Kim, M.J. Kim, S. Oh, and J.-S. Rhyee, J. Alloys Compd. 615, 933 (2014).10.1016/j.jallcom.2014.06.196 ↗