journal article·2006-02

Electroless nickel/gold bump in the flip-chip-type CMOS package for mobile-phone camera modules

Joong-Do Kim

Journal of Electronic Materials· Volume 35· Issue 2
Publisher page

Abstract

Wafer bumping technology using electroless nickel bump with a thin gold layer was studied for the flip-chip-type CMOS image-sensor (CIS) package for mobile-phone camera modules. The precise control of process parameters in the electroless nickel solution was undertaken by synthetic consideration of the effects of solution temperature, pH, stabilizer concentration, and aluminum pad size on the electroless nickel/gold bump formation. The flip-chip bonding process fitting the electroless nickel/gold bump is conducted by optimization of bonding temperature, pressure, and time. Reliability tests are performed to ensure the robustness of the image-sensor module. The impurity particle density is estimated to be one per 300,000 pixels by 3D laser analysis on the image-sensor surface. The phenomenon of the drop in chip yield during the wet process is attributed to the organic particles produced during the wafer backside coating. From all the experimental results, we first suggest that electroless nickel/gold can be applied to flip-chip-type CIS package for the mobilephone camera module without any significant impurity contamination of the image-sensor surface.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Electrodeposition and Electroless Coatings · Electronic Packaging and Soldering Technologies · Semiconductor materials and interfaces

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (17)

Show source-provided references
1. E.J. Vardaman and L. Matthew,Flip-Chip Market Projection: Flip-Chip and Wafer-Level Packaging Market Analysis, ed. E.J. Vardaman (Austin, TX: Techsearch International, Inc., 2003), p. 9.
2. J.H. Lau,Chip-Level Interconnects: Low-Cost Flip-Chip Technologies, ed. J.H. Lau (New York: McGraw-Hill, 2000), p. 27.
3. T. Oppert, E. Zakel, and T. Teutsch,Proc. of the International Electronic Manufacturing Technology Symposium (IEMT/IMC), (Japan Institute of Electronic Packaging, 1998), p. 15.
4. E. Davies, W. Harding, R. Schwartz, and J. Corning,IBM J. Rev. Dev. 102 (1964).10.1147/rd.82.0102 ↗
5. T.W. Goodman and E.J. Vardaman,Flip-Chip Technologies: FCIP and Expanding Markets for Flip-Chip, ed. E.J. Vardaman (Austin, TX: Techsearch International, Inc., Austin, 1997), p. 17.
6. E.H. David, L. Changqing, P.C. Paul, C.W. David, and H.M. Samjid,IEEE Trans. Components and Packag. Tech., 25, 87 (2002).10.1109/6144.991180 ↗
7. E.H. David, L. Changqing, P.C. Paul, C.W. David, and H.M. Samjid,IEEE Trans. Components and Packag. Tech., 25, 98 (2002).10.1109/6144.991181 ↗
8. Y.D. Jeon, K.W. Paik, K.S. Bok, W.S. Choi, and C.L. Cho,J. Electron. Mater. 31, 520 (2002).10.1007/s11664-002-0109-4 ↗
9. T.D. Jeon, S. Nieland, A. Ostmann, H. Reichl, and K.W. Paik,J. Electron. Mater. 32, 548 (2003).10.1007/s11664-003-0141-z ↗
10. J.-D. Kim, Y.-N. Kim, J.-W. Lee, and J.-H. Park,Bump Characteristics of Electroless Nickel/Gold for LDI Devices. Internal Technical Report (Changwon, Korea: Samsung Techwin Co. Ltd, 2002).
11. H.-C. Jung and J.-K. Lyu,A Flip-Chip-Type CMOS Image Sensor Module Using Electroless Nickel/Gold. Internal Technical Report (Changwon, Korea: Samsung Techwin Co. Ltd, 2004).
12. S.-J. Jang and M.-S. Seo,Nickel Bump Qualification Procedure. Internal Quality Assurance Report (Changwon, Korea: Samsung Techwin Co. Ltd, 2004).
13. M. Schlesinger and M. Paunovic,Electroless Deposition of Nickel: Modern Electroplating, ed. M. Schlesinger and M. Paunovic (New York: John Wiley & Sons, 2000), p. 667.
14. W.C. Ng, T.M. Ko, C. William, and G.J. Qi,1998 IEEE/CPMT Electron. Packag. Technol. Conf., Hongkong (1998), p. 89.
15. X. Yin, L. Hong, and B.-H. Chen,J. Phys. Chem. 108, 10919 (2004).10.1021/jp036070k ↗
16. X. Chen, J. Yi, G. Qi, and F. Liu,Proc. Intl. Symp. Electron. Mater. Packag., Hongkong (2000), p. 12.
17. A.J. Bard and L.R. Faulkner,Mass Transfer by Migration and Diffusion: Electrochemical Methods—Fundamentals and Applications, ed. A.J. Bard (New York: John Wiley & Sons, 1980), p. 119.