journal article·2012-11

The Combined Effect of Shock Impacts and Operational Power Cycles on the Reliability of Handheld Device Component Board Interconnections

J.S. Karppinen, T. Laurila, T.T. Mattila, M. Paulasto-Kröckel

Journal of Electronic Materials· Volume 41· Issue 11
Publisher page

Abstract

A compact high-density test board has been subjected to combinations of power cycling and shock impact loads. The test board was designed to replicate both the mechanical shock impact response and the thermomechanical response of a commercial handheld device component board under product- and board-level tests. The power cycling loading affected the microstructure of the solder interconnections by (1) enhancing the growth of interfacial intermetallic compound layers and (2) driving the coalescence of intermetallic particles inside the solder bulk. These microstructural changes initially improved drop test reliability, but longer exposure time caused the drop reliability to deteriorate. The lifetimes and failure modes of the test boards were found to be similar in concurrent and consecutive test combinations. Furthermore, the lifetime trend of the consecutive power cycling and drop tests was found to be the same in board- and product-level tests. This confirms that product-level reliability can be assessed with board-level tests.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Electronic Packaging and Soldering Technologies · 3D IC and TSV technologies · Integrated Circuits and Semiconductor Failure Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (34)

Show source-provided references
1. E.H. Wong, Y.-W. Mai, S.K.W. Seah, R. Rajoo, T.B. Lim, C.T. Lim, and J. Field (Paper presented at the Conference on High Density Microsystem Design and Packaging and Component Failure Analysis, IEEE, 2005).
2. S.K.W. Seah, E.H. Wong, Y.W. Mai, R. Rajoo, and C.T. Lim, Proceedings of 56th Electronic Components and Technology Conference (Piscataway, NJ: IEEE, 2006), p. 1484.
3. JEDEC Standard JESD22-B111, Board Level Drop Test Method of Components for Handheld Electronic Products (July 2003).
4. M. Alajoki, L. Nguyen, and J. Kivilahti, Proceedings of 55th Electronics Components and Technology Conference, Vol. 1 (Piscataway, NJ: IEEE, 2005), p. 637.
5. T.T. Mattila and J.K. Kivilahti, J. Electron. Mater. 34, 969–976 (2005).10.1007/s11664-005-0084-7 ↗
6. T.Y. Tee, H.S. Ng, C.T. Lim, E. Pek, and Z. Zhong, Microelectron. Reliab. 44, 1131–1142 (2004).10.1016/j.microrel.2004.03.005 ↗
7. K. Mishiro, S. Ishikawa, M. Abe, T. Kumai, Y. Higashiguchi, and K.I. Tsubone, Microelectron. Reliab. 42, 77–82 (2002).10.1016/S0026-2714(01)00230-X ↗
8. Z.J. Xu and T.X. Yu, Proceedings of the 10th Electronic Packaging Technology Conference (Piscataway, NJ: IEEE, 2008), p. 1080.
9. L.B. Tan, C.W. Ang, C.T. Lim, V.B.C. Tan, and Z. Xiaowu, Proceedings of the 7th Electronic Packaging Technology Conference (Piscataway, NJ: IEEE, 2005), p. 645.
10. J-E. Luan, T.Y. Tee, E. Pek, C.T. Lim, and Z. Zhong, Proceedings of the 5th Electronic Packaging Technology Conference (Piscataway, NJ: IEEE, 2003), p. 233.
11. Y.-S. Lai, P.-C. Yang, and C.-L. Yeh, Microelectron. Reliab. 48, 274–281 (2008).10.1016/j.microrel.2007.03.005 ↗
12. J. Varghese and A. Dasgupta, Microelectron. Reliab. 47, 1095–1102 (2007).10.1016/j.microrel.2006.07.002 ↗
13. R. Darveaux, C. Reichman, and N. Islam, Proceedings of the 56th Electronic Components and Technology Conference (Piscataway, NJ: IEEE, 2006), p. 906.
14. T. Laurila, T. Mattila, V. Vuorinen, J. Karppinen, J. Li, M. Sippola, and J.K. Kivilahti, Microelectron. Reliab. 47, 1135–1144 (2007).10.1016/j.microrel.2006.07.095 ↗
15. S.J. Ham, M.S. Cho, and S.B. Lee, Proceedings of the first International Symposium on Electronic Material and Packaging (Piscataway, NJ: IEEE, 2000), p. 350.
16. J. Li, J. Karppinen, T. Laurila, and J.K. Kivilahti, IEEE Trans. Compon. Packag. Technol. 32, 302–308 (2009).10.1109/TCAPT.2009.2012518 ↗
17. M. Pei, X. Fan, and P.K. Bhatti, Proceedings of the 56th Electronic Components and Technology Conference (Piscataway, NJ: IEEE, 2006), p. 899.
18. Y.-S. Lai, T.H. Wang, and C.-C. Lee, IEEE Trans. Device Mater. Reliab. 8, 122–128 (2008).10.1109/TDMR.2007.915045 ↗
19. M.B. Bever, D.L. Holt, and A.C. Titchener, Prog. Mater. Sci. 17, 5–177 (1973).10.1016/0079-6425(73)90001-7 ↗
20. D.W. Henderson, J.J. Woods, T.A. Gosselin, J. Bartelo, D.E. King, T.M. Korhonen, M.A. Korhonen, L.P. Lehman, E.J. Cotts, S.K. Kang, P. Lauro, D.-Y. Shih, C. Goldsmith, and K.J. Puttlitz, J. Mater. Res. 19, 1608–1612 (2004).10.1557/JMR.2004.0222 ↗
21. T.T. Mattila, M. Mueller, M. Paulasto-Kröckel, K.-J. Wolter, Proceedings of the 3rd Electronic System-Integration Technology Conference (Piscataway, NJ: IEEE, 2010), p. 1.10.1109/ESTC.2010.5642843 ↗
22. L. Yang, L. Yin, B. Roggeman, and P. Borgesen, Proceedings of 60th Electronic Components and Technology Conference (Piscataway, NJ: IEEE, 2010), p. 1518.10.1109/ECTC.2010.5490795 ↗
23. L. Xu and J.H.L. Pang, Proceedings of the 8th Electronic Packaging Technology Conference (Piscataway, NJ: IEEE, 2006), p. 570.10.1109/EPTC.2006.342776 ↗
24. B. Zhang, H. Ding, and X. Sheng, Microelectron. Reliab. 49, 530–536 (2009).10.1016/j.microrel.2009.02.024 ↗
25. T.T. Mattila and J.K. Kivilahti, J. Electron. Mater. 35, 250–256 (2006).10.1007/BF02692443 ↗
26. J.S. Karppinen, J. Li, T.T. Mattila, and M. Paulasto- Kröckel, Microelectron. Reliab. 50, 1994–2000 (2010).10.1016/j.microrel.2010.07.011 ↗
27. J.S. Karppinen, J. Li, J. Pakarinen, T.T. Mattila, and M. Paulasto-Kröckel, Microelectron. Reliab. 52, 190–198 (2012).10.1016/j.microrel.2011.09.001 ↗
28. S.W. Jeong, J.H. Kim, and H.M. Lee, J. Electron. Mater. 33, 1530–1544 (2004).10.1007/s11664-004-0095-9 ↗
29. K.N. Tu, Acta Metall. 21, 347–354 (1973).10.1016/0001-6160(73)90190-9 ↗
30. T. Laurila, V. Vuorinen, and J.K. Kivilahti, Mater. Sci. Eng.: R: Rep. 49, 1 (2005).10.1016/j.mser.2005.03.001 ↗
31. J. Keller, D. Baither, U. Wilke, and G. Schmitz, Acta Mater. 59, 2731–2741 (2011).10.1016/j.actamat.2011.01.012 ↗
32. H. Chen, J. Han, J. Li, and M. Li, doi: 10.1016/j.microrel.2012.01.009 .10.1016/j.microrel.2012.01.009 ↗
33. B. Dompierre, V. Aubin, E. Charkaluk, W.C. Maia Filho, and M. Brizoux, Mater. Sci. Eng. A 528, 4812–4818 (2011).10.1016/j.msea.2011.03.001 ↗
34. W. Peng and M. Marques, J. Electron. Mater. 36, 1679–1690 (2007).10.1007/s11664-007-0260-z ↗