Deposition of Tungsten Thin Films on Flexible Polymer Substrates by Direct-Current Magnetron Sputtering
Source abstract
Abstract
We have investigated thin tungsten films deposited on polymer substrates by direct-current magnetron sputtering under different conditions. Unlike tungsten films deposited on rigid substrates, films on polymer substrates grew at appropriate sputtering power, low sputtering pressure, and low substrate temperature. High sputtering power results in tungsten films with good crystal orientation, compact microstructure, and low electrical resistivity. However, high-power sputtering damages the polymer substrates. Enhancing sputtering pressure substantially degrades tungsten orientation and increases electrical resistivity. Furthermore, a slight increase in substrate temperature results in tungsten films with good crystal orientation, a dense microstructure, and low electrical resistivity. Nonetheless, a high substrate temperature results in soft and deformed polymer substrates; this degrades tungsten crystal orientation and substantially roughens tungsten films. On the basis of this study, compact and flat tungsten films with low electrical resistivity can be obtained at a sputtering power of 69 W, a sputtering pressure of 1 Pa, a substrate temperature of 100°C, and a distance between target and substrate of 60 mm.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Semiconductor materials and devices · Metal and Thin Film Mechanics · Electronic and Structural Properties of Oxides
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (19)
Show source-provided references
1. D.L. Zhao, D.A. Mourey, and T.N. Jackson, IEEE Electron. Dev. Lett. 31, 323 (2010).10.1109/LED.2010.2041321 ↗
2. A.E. Hess, J. Dunning, D. Tyler, and C.A. Zorman, in 3rd International IEEE EMBS Conference on Neural Engineering, Kohala Coast, (2007), pp. 32.
3. J.S. Cho, S. Baek, and J.C. Lee, Sol. Energy Mater. Sol. Cells 95, 1852 (2011).10.1016/j.solmat.2011.02.007 ↗
4. Y.Y. Yu, W.C. Chien, C.Y. Ciou, and H.C. Wu, Thin Solid Films 519, 4721 (2011).10.1016/j.tsf.2011.01.024 ↗
5. E. Zampetti, L. Maiolo, A. Pecora, F. Maita, S. Pantalei, A. Minotti, A. Valletta, M. Cuscunà, A. Macagnano, G. Fortunato, and A. Bearzotti, Sens. Actuators B 155, 768 (2011).10.1016/j.snb.2011.01.045 ↗
6. T. Lemke, G. Biancuzzi, H. Feth, J. Huber, F. Goldschmidtboing, and P. Woias, Sens. Actuators A 168, 213 (2011).10.1016/j.sna.2011.03.042 ↗
7. E.J. Geiger, A.P. Pisano, and F. Svec, J. Microelectromech. Syst. 19, 944 (2010).10.1109/JMEMS.2010.2048702 ↗
8. S.Y. Xiao, L.F. Che, X.X. Li, and Y.L. Wang, Microelectron. Eng. 85, 452 (2008).10.1016/j.mee.2007.08.004 ↗
9. C.F. Lo, P. McDonald, D. Draper, and P. Gilman, J. Electron. Mater. 34, 1468 (2005).10.1007/s11664-005-0152-z ↗
10. F.U. Khan and Izhar, J. Micomech. Microeng. 25, 13 (2015).
11. S.R. Gutbrod, M.S. Sulkin, J.A. Rogers, and I.R. Efimov, Prog. Biophys. Mol. Biol. 115, 244 (2014).10.1016/j.pbiomolbio.2014.07.011 ↗
12. C.L. Wang, et al., Cell Res. 21, 1517 (2011).10.1038/cr.2011.117 ↗
13. Y.G. Shen, et al., J. Appl. Phys. 87, 177 (2000).10.1063/1.371841 ↗
14. K. Bouziane, M. Mamor, and F. Meyer, Appl. Phys. A 81, 209 (2005).10.1007/s00339-004-2558-5 ↗
15. V. Stelmakh, et al., J. Vac. Sci. Technol. A 31, 061505 (2013).10.1116/1.4817813 ↗
16. A.M. HaghiriGosnet, et al., J. Vac. Sci. Technol. A 7, 2663 (1989).10.1116/1.575770 ↗
17. M.J. O’Keefe, J.T. Grant, and J.S. Solomon, J. Electron. Mater. 24, 961 (1995).10.1007/BF02652968 ↗
18. P. Petroff, T.T. Sheng, A.K. Sinha, G.A. Rozgonyi, and F.B. Alexander, J. Appl. Phys. 44, 2545 (1973).10.1063/1.1662611 ↗
19. T.F. Deutsch and D.D. Rathman, Appl. Phys. Lett. 45, 623 (1984).10.1063/1.95333 ↗