The Growth of Interfacial IMC Layer in SAC0307 Solder Joints with Specific Grain Orientation Under Electrical and Thermal Coupling Fields
Source abstract
Abstract
We reported the reliability of Sn0.3Ag0.7Cu (SAC0307) solder joints under electrical and thermal coupling fields, where the c-axes of Sn grains were all nearly parallel to the direction of current and thermal flows. In these studies, individual electromigration (EM), individual thermomigration (TM), and thermoelectric coupling migration behaviors were investigated by applying a current density of 104 A/cm2, and a temperature gradient of 103°C/cm at Cu/SAC0307/Cu solder joints, respectively. The SEM and EBSD were utilized to characterize the morphologies and crystal orientations of each solder joint. The results indicated that the Cu atoms tended to migrate to the anode side under EM. The thickness of an interfacial intermetallic (IMC) layer at the anode increased 3.93 μm. In addition, the Cu atoms diffused toward the lower temperature side under TM, and the thickness of the IMC layer at cold side increased 1.72 μm. When the solder joints were experiencing the coupling fields with the same directions of current and thermal flows, the thickness of IMC layer at anode side (cold side) could increase up to 7.67 μm. The results showed that the effect of thermal flow could assist to accumulate the IMC at the anode side, and accelerate the migration of Cu atoms. This research could help to further understand the reliability behaviors of SAC0307 solders under the service environment.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Electronic Packaging and Soldering Technologies · Copper Interconnects and Reliability · 3D IC and TSV technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (34)
Show source-provided references
1. T. Ohba, ECS Trans. 34, 1011 (2011).10.1149/1.3567707 ↗
2. R. Agarwal, W. Zhang, P. Limaye, R. Labie, B. Dimcic, A. Phommahaxay and P. Soussan, 2010 Proceedings 60th Electronic Components and Technology Conference (ECTC). June, vol. 858 (2010).
3. D.Q. Yu, J. Zhao, and L. Wang, J. Alloy. Compd. 376, 170 (2004).10.1016/j.jallcom.2004.01.012 ↗
4. H. Ye, C. Basaran, and D.C. Hopkins, Appl. Phys. Lett. 82, 1045–1047 (2003).10.1063/1.1554775 ↗
5. X. Gu, K.C. Yung, and Y.C. Chan, J. Mater. Sci. Mater. Electron. 21, 1090 (2010).10.1007/s10854-009-9992-2 ↗
6. Y. Tian, J. Han, and F. Guo, J. Mater. Sci.-Mater. Electron. 28, 10785 (2017).10.1007/s10854-017-6952-0 ↗
7. K.N. Tu, J. Appl. Phys. 94, 5451 (2003).10.1063/1.1611263 ↗
8. F.-Y. Ouyang, K.N. Tu, Y.-S. Lai, and A.M. Gusak, J. Appl. Phys. Lett. 89, 221906 (2006).10.1063/1.2385205 ↗
9. Y. Wang, J. Han, L.M. Ma, Y. Zuo, and F. Guo, J. Electron. Mater. 45, 6095 (2016).10.1007/s11664-016-4929-z ↗
10. G. Gurp, P. Waard, and F. Chatenier, J. Appl. Phys. 58, 728 (1985).10.1063/1.336190 ↗
11. G. Gurp, P. Waard, and F. Chatenier, J. Appl. Phys. Lett. 45, 1054 (1984).10.1063/1.95065 ↗
12. E. Stracke and C. Herzig, Phys. Status Solidi (A) 66, 189 (1981).10.1002/pssa.2210660121 ↗
13. T.Y. Tan, J. Appl. Phys. Lett. 73, 2678 (1998).10.1063/1.122551 ↗
14. P. Rimbey and R. Sorbello, Phys. Rev. B Condens. Matter. 38, 1095 (1988).10.1103/PhysRevB.38.1095 ↗
15. W.L. Schaich, Phys. Rev. B. 13, 3350 (1976).10.1103/PhysRevB.13.3350 ↗
16. A.M. Stoneham and C.P. Flynn, J. Phys. F Metal Phys. 3, 505 (1973).10.1088/0305-4608/3/3/008 ↗
17. R.A. Johns and D.A. Blackburn, Thin Solid Films 25, 291 (1975).10.1016/0040-6090(75)90049-8 ↗
18. C.Q. Ru, J. Mater. Sci. 35, 5575 (2000).
19. W. Jones, J. Phys. C Solid State Phys. 14, 5505 (1981).10.1088/0022-3719/14/35/011 ↗
20. M.J. Gillan, J. Phys. C Solid State Phys. 17, L237 (1984).10.1088/0022-3719/17/8/003 ↗
21. M. Hamid and C. Basaran. 2008 33rd IEEE/CPMT IEMT. (2008).
22. D. Feng, F. Wang, D. Li, B. Wu, and L. Liu, Mater. Res. Express. 6, 4 (2018).
23. F. Wang, H. Chen, D. Li, Z. Zhang, and X. Wang, Electron. Mater. Lett. 15, 1 (2018).
24. T. Tian, K.N. Tu, H.Y. Chen, H.Y. Hsiao, and C. Chen, Annu. Rev. Mater. Res. 40, 423 (2012).
25. A.T. Huang, K.N. Tu, and Y.-S. Lai, J. Appl. Phys. 100, 033512 (2006).10.1063/1.2227621 ↗
26. Y. Zuo, L.M. Ma, F. Guo, L. Qiao, Y.T. Shu, A. Lee, and K.N. Subramanian, J. Electron. Mater. 43, 4395 (2014).10.1007/s11664-014-3345-5 ↗
27. Y. Tian, J. Han, L.M. Ma, and F. Guo, Microelectron. Reliab. 80, 7 (2018).10.1016/j.microrel.2017.11.005 ↗
28. F. Guo, Q. Liu, L. Ma, and Y. Zuo, J. Mater. Res. 1, 1 (2016).
29. D. Yang, B.Y. Wu, Y.C. Chan, and K.N. Tu, J. Appl. Phys. 102, 043502 (2007).10.1063/1.2769270 ↗
30. C.M. Chen, L.T. Chen, and Y.S. Lin, J. Electron. Mater. 36, 168 (2007).10.1007/s11664-006-0025-0 ↗
31. X. Gu, D. Yang, Y.C. Chan, and B.Y. Wu, J. Mater. Res. 23, 2591 (2011).10.1557/JMR.2008.0331 ↗
32. Z. Sun, L. Ma, Y. Wang, J. Han, Y. Zuo and F. Guo, 2017 18th International Conference on Electronic Packaging Technology (ICEPT). 750 (2017).
33. Y. Li, F.S. Wu, and Y.C. Chan, J. Mater. Sci.-Mater. Electro. 26, 8522 (2015).10.1007/s10854-015-3524-z ↗
34. H.-Y. Hsiao and C. Chen, J Appl Phys Lett. 90, 249902 (2007).10.1063/1.2748851 ↗