journal article·2020-05

Influence of Sputtering Power Density on the Thermoelectric and Mechanical Properties of Flexible Thermoelectric Antimony Telluride Films Deposited by DC Magnetron Sputtering

Prasopporn Junlabhut, Pilaipon Nuthongkum, Rachsak Sakdanuphab, Adul Harnwunggmoung, Aparporn Sakulkalavek

Journal of Electronic Materials· Volume 49· Issue 5
Publisher page

Abstract

Antimony telluride (Sb2Te3) films were deposited on flexible polyimide substrates by DC magnetron sputtering technique using a 99.9% alloy Sb2Te3 target. We measured structural, electrical, thermoelectric and mechanical properties with sputtering power density in the range 30–50 W. X-ray diffraction confirmed that all Sb2Te3 films have high crystallinity with a significant preferential growth along the (015) plane. Surface morphologies were verified by scanning electron microscope: deposited film grain size increased with sputtering power density. The elemental composition was determined by energy dispersive x-ray spectroscopy. Electrical transport properties, carrier concentration, was measured by Hall effect measurement at room temperature. Electrical conductivity and Seebeck coefficient were simultaneously measured by a DC four-terminal method (ZEM-3). The power factor was strongly dominated by electrical conductivity, leading to a maximum of 1.95 mW/K2m with sputtering power 45 W at 300°C. The wettability test, based on the contact angle, evaluated surface energy and hydrophilicity. Nanoindentation was measured on a NHT2 CSM Instrument with diamond Berkovich indenter (B-P 31) at room temperature. The hardness and elastic modulus of deposited Sb2Te3 films increased with the power density.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Thermoelectric Materials and Devices · Chalcogenide Semiconductor Thin Films · Thermal properties of materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (31)

Show source-provided references
1. J.-C. Yang, X.-Q. Meng, C.-T. Yang, and Y. Zhang, Appl. Surf. Sci. 287, 335 (2013).
2. A. Kosarian, M. Shakiba, and E. Farshidi, IEEE J. Trans. Electr. Electron. 13, 27 (2018).10.1002/tee.22494 ↗
3. W. Xiao, H. Deng, S. Zou, Y. Ren, D. Tang, M. Lei, C. Xiao, X. Zhou, and Y. Chen, J. Nucl. Mater. 509, 542 (2018).10.1016/j.jnucmat.2018.07.011 ↗
4. F. Anjum, R. Ahmad, N. Afzal, and G. Murtaza, Mater. Lett. 219, 23 (2018).10.1016/j.matlet.2018.02.058 ↗
5. G.D. Deshmukh, S.M. Patil, S.S. Patil, and P.H. Pawar, J. Chem. Biol. Phys. Sci. 5, 2769 (2015).
6. R. Sathyamoorthy and J. Dheepa, J. Phys. Chem. Solids 68, 111 (2007).10.1016/j.jpcs.2006.09.014 ↗
7. Z. Yua, C. Yana, T. Huanga, W. Huanga, Y. Yana, Y. Zhanga, L. Liua, Y. Zhanga, and Y. Zhao, Appl. Surf. Sci. 258, 5222 (2012).10.1016/j.apsusc.2012.01.152 ↗
8. L.M. Goncalves, P. Alpuim, A.G. Rolo, and J.H. Correia, Thin Solid Films 519, 4152 (2011).10.1016/j.tsf.2011.01.395 ↗
9. N.G. Patel and P.G. Patel, J. Mater. Sci. 26, 2543 (1991).10.1007/BF01130208 ↗
10. R. Venkatasubramanian, T. Colpitts, E. Watko, M. Lamvik, and N. El-Masry, J. Cryst. Growth 170, 817 (1997).10.1016/S0022-0248(96)00656-2 ↗
11. T. Liu, H. Deng, H. Cao, W. Zhou, J. Zhang, J. Liu, P. Yang, and J. Chu, J. Cryst. Growth 416, 78 (2015).10.1016/j.jcrysgro.2015.01.022 ↗
12. H. Shen, S. Lee, J.-G. Kang, T.-Y. Eom, H. Lee, and S. Han, Appl. Surf. Sci. 429, 115 (2012)
13. B. Fang, Z. Zeng, X. Yan, and Z. Hu, J. Mater. Sci. Mater. Electron. 24, 4 (2013).10.1007/s10854-012-0888-1 ↗
14. M. Mizoshiri, M. Mikami, and K. Ozaki, Jpn. J. Appl. Phys. 52, 06FL07 (2012)10.1143/JJAP.51.06FL07 ↗
15. T. Khumtong, P. Sukwisute, A. Sakulkalavek, and R. Sakdanuphab, J. Electron. Mater. 46, 5 (2017).10.1007/s11664-017-5303-5 ↗
16. N.-W. Park, W.-Y. Leel, J.-E. Hong, T.-H. Park, S.-G. Yoon, H. Im, H.S. Kim, and S.-K. Lee, Nanoscale Res. Lett. 10, 20 (2015).10.1186/s11671-015-0733-6 ↗
17. K.-Y. Chan and B.-S. Teo, J. Mater. Sci. 40, 5971 (2005).10.1007/s10853-005-1362-8 ↗
18. H.J. Lee, S. Hyun, H.S. Park, and S.W. Han, Microelectron. Eng. 88, 593 (2011).10.1016/j.mee.2010.06.019 ↗
19. M. Zenkiewicz, J. Achiev. Mater. 24, 1 (2007).
20. H.-J. Lee, H.S. Park, S. Han, and J.Y. Kim, Thermochim. Acta 542, 57 (2012).10.1016/j.tca.2012.01.003 ↗
21. C.-H. Tasi, Y.-C. Tseng, S.-R. Jian, Y.-Y. Liao, C.-M. Lin, P.-F. Yang, D.-L. Chen, H.-J. Chen, C.-W. Luo, and J.-Y. Juang, J. Alloys Compd. 619, 834 (2015).10.1016/j.jallcom.2014.09.028 ↗
22. A. Chaoumead, Y.-M. Sung, and D.-J. Kwak, Adv. Condens. Matter. Phys. 2012, 1 (2012).10.1155/2012/651587 ↗
23. H.C. Kima, T.S. Oha, and D.-B. Hyun, J. Phys. Chem. Solids 61, 743 (2000).10.1016/S0022-3697(99)00269-3 ↗
24. T. Chen, P. Fana, Z. Zheng, D. Zhang, X. Cai, G. Liang, and J. Chi, J. Adv. Mater. 194–196, 2400 (2011).
25. P. Fan, Z.-H. Zheng, G.-X. Liang, D.-P. Zhang, and X.-M. Cai, J. Alloys Compd. 505, 278 (2010).10.1016/j.jallcom.2010.06.046 ↗
26. S. Shena, W. Zhua, Y. Denga, H. Zhaob, Y. Penga, and C. Wang, Appl. Surf. Sci. 414, 197 (2017).10.1016/j.apsusc.2017.04.074 ↗
27. P. Nuthongkum, R. Sakdanuphab, M. Horprathum, and A. Sakulkalavek, J. Electron. Mater. 46, 11 (2017).
28. M.S. Angelo, B.E. McCandless, R.W. Birkmire, S.A. Rykov, and J.G. Chen, Prog. Photovolt: Res. Appl. 15, 93 (2007).10.1002/pip.708 ↗
29. S.-R. Jian, P.H. Le, C.-W. Luo, and J.-Y. Juang, J. Appl. Phys. 121, 175302 (2017).10.1063/1.4982911 ↗
30. J. Wang, Z. Huang, H. Duan, S. Yu, X. Feng, G. Wang, W. Zhang, and T. Wang, Acta Mech. Solida Sin. 24, 1 (2011).10.1016/S0894-9166(11)60007-4 ↗
31. A.M. Abazari, S.M. Safavi, G. Rezazadeh, and L.G. Villanueva, Sensors 15, 28543 (2015).10.3390/s151128543 ↗